select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
select SPL_SEPARATE_BSS if SPL
-config TARGET_EDB93XX
- bool "Support edb93xx"
- select CPU_ARM920T
- select GPIO_EXTRA_HEADER
- select PL010_SERIAL
-
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
-config TARGET_GPLUGD
- bool "Support gplugd"
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
-
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
-config TARGET_SPEAR300
- bool "Support spear300"
- select BOARD_EARLY_INIT_F
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select PL011_SERIAL
- imply CMD_SAVES
-
-config TARGET_SPEAR310
- bool "Support spear310"
- select BOARD_EARLY_INIT_F
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select PL011_SERIAL
- imply CMD_SAVES
-
-config TARGET_SPEAR320
- bool "Support spear320"
- select BOARD_EARLY_INIT_F
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select PL011_SERIAL
- imply CMD_SAVES
-
-config TARGET_SPEAR600
- bool "Support spear600"
- select BOARD_EARLY_INIT_F
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select PL011_SERIAL
- imply CMD_SAVES
-
config TARGET_STV0991
bool "Support stv0991"
select CPU_V7A
select SPI_FLASH
imply CMD_DM
-config TARGET_X600
- bool "Support x600"
- select BOARD_LATE_INIT
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select PL011_SERIAL
- select SUPPORT_SPL
-
config TARGET_FLEA3
bool "Support flea3"
select CPU_ARM1136
select DM
select DM_GPIO
select DM_I2C
+ select DM_ETH
select DM_KEYBOARD
select DM_SERIAL
select DM_SPI
select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
select SPL_SERIAL_SUPPORT
select SPL_SYSRESET
- select SPL_WATCHDOG_SUPPORT
+ select SPL_WATCHDOG
select SUPPORT_SPL
select SYS_NS16550
select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select BINMAN
select CMD_GPIO
select CMD_MMC if MMC
- select CMD_USB if DISTRO_DEFAULTS
+ select CMD_USB if DISTRO_DEFAULTS && USB_HOST
select CLK
select DM
select DM_ETH
select DM_MMC if MMC
select DM_SCSI if SCSI
select DM_SERIAL
- select DM_USB if DISTRO_DEFAULTS
select GPIO_EXTRA_HEADER
select OF_BOARD_SETUP
select OF_CONTROL
select SYS_NS16550
select SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
- select USB_KEYBOARD if DISTRO_DEFAULTS
- select USB_STORAGE if DISTRO_DEFAULTS
+ select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST
+ select USB_STORAGE if DISTRO_DEFAULTS && USB_HOST
select SPL_USE_TINY_PRINTF
select USE_PREBOOT
select SYS_RELOC_GD_ENV_ADDR
imply FIT
imply OF_LIBFDT_OVERLAY
imply PRE_CONSOLE_BUFFER
- imply SPL_GPIO_SUPPORT
+ imply SPL_GPIO
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT if MMC
- imply SPL_POWER_SUPPORT
+ imply SPL_POWER
imply SPL_SERIAL_SUPPORT
imply USB_GADGET
select DM_GPIO
select DM_MMC if MMC
select DM_SERIAL
- select DM_USB if USB
select OF_CONTROL
select SYSRESET
select TIMER
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
- select DM_USB if USB
select GPIO_EXTRA_HEADER
select OF_CONTROL
select SPI
select DM_SERIAL
select DM_SPI if SPI
select DM_SPI_FLASH if DM_SPI
- select DM_USB if USB
select FIRMWARE
select GPIO_EXTRA_HEADER
select OF_CONTROL
select DM_ETH
select BLK
select USB
- select DM_USB
config TARGET_TOTAL_COMPUTE
bool "Support Total Compute Platform"
select ARM64
select DM
select DM_SERIAL
- select DM_USB
select GPIO_EXTRA_HEADER
select OF_CONTROL
select PL01X_SERIAL
select DM_SCSI
select DM_SERIAL
select DM_SPI
- select DM_USB
select GPIO_EXTRA_HEADER
select SPL_DM if SPL
select SPL_DM_SPI if SPL
select DM_MTD
select DM_RESET
select DM_SERIAL
- select DM_USB
select OF_BOARD_SETUP
select OF_CONTROL
select OF_LIBFDT
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
+config ARCH_SYNQUACER
+ bool "Socionext SynQuacer SoCs"
+ select ARM64
+ select DM
+ select GIC_V3
+ select PSCI_RESET
+ select SYSRESET
+ select SYSRESET_PSCI
+ select OF_CONTROL
+ help
+ Support for SynQuacer SoC family developed by Socionext Inc.
+ This SoC is used on 96boards EE DeveloperBox.
+
config ARCH_STM32
bool "Support STMicroelectronics STM32 MCU with cortex M"
select CPU_V7M
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
- select DM_USB if USB
select ENABLE_ARM_SOC_BOOT0_HOOK
select OF_CONTROL
select SPI
source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
-source "board/Marvell/gplugd/Kconfig"
source "board/Marvell/octeontx/Kconfig"
source "board/Marvell/octeontx2/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/broadcom/bcm968580xref/Kconfig"
source "board/broadcom/bcmns3/Kconfig"
source "board/cavium/thunderx/Kconfig"
-source "board/cirrus/edb93xx/Kconfig"
source "board/eets/pdu001/Kconfig"
source "board/emulation/qemu-arm/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/kontron/sl28/Kconfig"
source "board/myir/mys_6ulx/Kconfig"
source "board/seeed/npi_imx6ull/Kconfig"
-source "board/spear/spear300/Kconfig"
-source "board/spear/spear310/Kconfig"
-source "board/spear/spear320/Kconfig"
-source "board/spear/spear600/Kconfig"
-source "board/spear/x600/Kconfig"
+source "board/socionext/developerbox/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"