config THUMB2_KERNEL
bool
+config SYS_ICACHE_OFF
+ bool "Do not enable icache"
+ default n
+ help
+ Do not enable instruction cache in U-Boot.
+
+config SPL_SYS_ICACHE_OFF
+ bool "Do not enable icache in SPL"
+ depends on SPL
+ default SYS_ICACHE_OFF
+ help
+ Do not enable instruction cache in SPL.
+
+config SYS_DCACHE_OFF
+ bool "Do not enable dcache"
+ default n
+ help
+ Do not enable data cache in U-Boot.
+
+config SPL_SYS_DCACHE_OFF
+ bool "Do not enable dcache in SPL"
+ depends on SPL
+ default SYS_DCACHE_OFF
+ help
+ Do not enable data cache in SPL.
+
config SYS_ARM_CACHE_CP15
bool "CP15 based cache enabling support"
help
density. For ARM architectures that support Thumb2 this flag will
result in Thumb2 code generated by GCC.
+config TPL_SYS_THUMB_BUILD
+ bool "Build TPL using the Thumb instruction set"
+ default y if SYS_THUMB_BUILD
+ depends on TPL && !ARM64
+ help
+ Use this flag to build SPL using the Thumb instruction set for
+ ARM architectures. Thumb instruction set provides better code
+ density. For ARM architectures that support Thumb2 this flag will
+ result in Thumb2 code generated by GCC.
+
+
config SYS_L2CACHE_OFF
bool "L2cache off"
help
Such implementation may be faster under some conditions
but may increase the binary size.
+config TPL_USE_ARCH_MEMCPY
+ bool "Use an assembly optimized implementation of memcpy for TPL"
+ default y if USE_ARCH_MEMCPY
+ depends on !ARM64
+ help
+ Enable the generation of an optimized version of memcpy.
+ Such implementation may be faster under some conditions
+ but may increase the binary size.
+
config USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset"
default y
Such implementation may be faster under some conditions
but may increase the binary size.
+config TPL_USE_ARCH_MEMSET
+ bool "Use an assembly optimized implementation of memset for TPL"
+ default y if USE_ARCH_MEMSET
+ depends on !ARM64
+ help
+ Enable the generation of an optimized version of memset.
+ Such implementation may be faster under some conditions
+ but may increase the binary size.
+
config ARM64_SUPPORT_AARCH32
bool "ARM64 system support AArch32 execution state"
default y if ARM64 && !TARGET_THUNDERX_88XX
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
- select BOARD_EARLY_INIT_F
+ select BOARD_EARLY_INIT_F if !RZA1
select DM
select DM_SERIAL
imply CMD_DM
imply DM_SPI
imply DM_SPI_FLASH
imply FAT_WRITE
+ imply SPL
+ imply SPL_DM
imply SPL_LIBDISK_SUPPORT
imply SPL_MMC_SUPPORT
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_SUPPORT
+ imply L2X0_CACHE
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
+ select DM_MMC if MMC
+ select DM_SCSI if SCSI
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
select SYSCON
select SYSRESET
select SYS_THUMB_BUILD
+ imply SPL_SYSRESET
imply CMD_DM
+ imply CMD_POWEROFF
+ imply ENV_VARS_UBOOT_RUNTIME_CONFIG
help
Support for STM32MP SoC family developed by STMicroelectronics,
MPUs based on ARM cortex A core
- U-BOOT is running in DDR and SPL support is the unsecure First Stage
- BootLoader (FSBL)
+ U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
+ FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
+ chain.
+ SPL is the unsecure FSBL for the basic boot chain.
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
select SYS_THUMB_BUILD if !ARM64
imply ADC
imply CMD_DM
+ imply DEBUG_UART_BOARD_INIT
imply DISTRO_DEFAULTS
imply FAT_WRITE
imply SARADC_ROCKCHIP
config TI_SECURE_DEVICE
bool "HS Device Type Support"
- depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
+ depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
help
If a high secure (HS) device type is being used, this config
must be set. This option impacts various aspects of the
authenticated) and the code. See the doc/README.ti-secure
file for further details.
+if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+config ISW_ENTRY_ADDR
+ hex "Address in memory or XIP address of bootloader entry point"
+ default 0x402F4000 if AM43XX
+ default 0x402F0400 if AM33XX
+ default 0x40301350 if OMAP54XX
+ help
+ After any reset, the boot ROM searches the boot media for a valid
+ boot image. For non-XIP devices, the ROM then copies the image into
+ internal memory. For all boot modes, after the ROM processes the
+ boot image it eventually computes the entry point address depending
+ on the device type (secure/non-secure), boot media (xip/non-xip) and
+ image headers.
+endif
+
source "arch/arm/mach-aspeed/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-imx/Kconfig"
source "board/bosch/shc/Kconfig"
+source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/ucRobotics/bubblegum_96/Kconfig"
source "board/birdland/bav335x/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
+source "board/variscite/dart_6ul/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
source "board/xilinx/Kconfig"
projects / platform / kernel / u-boot.git / blobdiff