-#!@PERL@
+#!@PERL@ -w
# -*- perl -*-
# @configure_input@
# aclocal - create aclocal.m4 by scanning configure.ac
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# the Free Software Foundation; either version 3, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Written by Tom Tromey <tromey@redhat.com>.
+# Written by Tom Tromey <tromey@redhat.com>, and
+# Alexandre Duret-Lutz <adl@gnu.org>.
BEGIN
{
- my $prefix = "@prefix@";
- my $perllibdir = $ENV{'perllibdir'} || "@datadir@/@PACKAGE@-@APIVERSION@";
- unshift @INC, "$perllibdir";
+ my $perllibdir = $ENV{'perllibdir'} || '@datadir@/@PACKAGE@-@APIVERSION@';
+ unshift @INC, (split '@PATH_SEPARATOR@', $perllibdir);
}
+use strict;
+
+use Automake::Config;
use Automake::General;
+use Automake::Configure_ac;
+use Automake::Channels;
+use Automake::ChannelDefs;
use Automake::XFile;
-
-# Some constants.
-$VERSION = "@VERSION@";
-$APIVERSION = "@APIVERSION@";
-$PACKAGE = "@PACKAGE@";
-$prefix = "@prefix@";
-# Note that this isn't pkgdatadir, but a separate directory.
-# Note also that the versioned directory is handled later.
-$acdir = "@datadir@/aclocal";
-$default_acdir = $acdir;
+use Automake::FileUtils;
+use File::Basename;
+use File::stat;
+use Cwd;
# Some globals.
-# Exit status.
-$exit_status = 0;
+# We do not operate in threaded mode.
+$perl_threads = 0;
+
+# Include paths for searching macros. We search macros in this order:
+# user-supplied directories first, then the directory containing the
+# automake macros, and finally the system-wide directories for
+# third-party macro. @user_includes can be augmented with -I.
+# @system_includes can be augmented with the `dirlist' file. Also
+# --acdir will reset both @automake_includes and @system_includes.
+my @user_includes = ();
+my @automake_includes = ("@datadir@/aclocal-$APIVERSION");
+my @system_includes = ('@datadir@/aclocal');
+
+# Whether we should copy M4 file in $user_includes[0].
+my $install = 0;
-# Name of the top autoconf input: `configure.ac' or `configure.in'.
-$configure_ac = find_configure_ac;
+# --diff
+my @diff_command;
-# Text to output.
-$output = '';
+# --dry-run
+my $dry_run = 0;
+
+# configure.ac or configure.in.
+my $configure_ac;
# Output file name.
-$output_file = 'aclocal.m4';
+my $output_file = 'aclocal.m4';
+
+# Option --force.
+my $force_output = 0;
+
+# Modification time of the youngest dependency.
+my $greatest_mtime = 0;
# Which macros have been seen.
-%macro_seen = ();
+my %macro_seen = ();
-# Which files have been seen.
-%file_seen = ();
+# Remember the order into which we scanned the files.
+# It's important to output the contents of aclocal.m4 in the opposite order.
+# (Definitions in first files we have scanned should override those from
+# later files. So they must appear last in the output.)
+my @file_order = ();
# Map macro names to file names.
-%map = ();
+my %map = ();
+
+# Ditto, but records the last definition of each macro as returned by --trace.
+my %map_traced_defs = ();
+
+# Map basenames to macro names.
+my %invmap = ();
# Map file names to file contents.
-%file_contents = ();
+my %file_contents = ();
-# How much to say.
-$verbose = 0;
+# Map file names to file types.
+my %file_type = ();
+use constant FT_USER => 1;
+use constant FT_AUTOMAKE => 2;
+use constant FT_SYSTEM => 3;
-# Map from obsolete macros to hints for new macros.
-my %obsolete_macros =
- (
- 'AC_FEATURE_CTYPE' => "use `AC_HEADER_STDC'",
- 'AC_FEATURE_ERRNO' => "add `strerror' to `AC_REPLACE_FUNCS(...)'",
- 'AC_FEATURE_EXIT' => '',
- 'AC_SYSTEM_HEADER' => '',
-
- # Note that we do not handle this one, because it is still run
- # from AM_CONFIG_HEADER.
- # 'AC_CONFIG_HEADER' => "use `AM_CONFIG_HEADER'",
-
- 'fp_C_PROTOTYPES' => "use `AM_C_PROTOTYPES'",
- 'fp_PROG_CC_STDC' => "use `AM_PROG_CC_STDC'",
- 'fp_PROG_INSTALL' => "use `AC_PROG_INSTALL'",
- 'fp_WITH_DMALLOC' => "use `AM_WITH_DMALLOC'",
- 'fp_WITH_REGEX' => "use `AM_WITH_REGEX'",
- 'gm_PROG_LIBTOOL' => "use `AM_PROG_LIBTOOL'",
- 'jm_MAINTAINER_MODE' => "use `AM_MAINTAINER_MODE'",
- 'md_TYPE_PTRDIFF_T' => "add `ptrdiff_t' to `AC_CHECK_TYPES(...)'",
- 'ud_PATH_LISPDIR' => "use `AM_PATH_LISPDIR'",
- 'ud_GNU_GETTEXT' => "use `AM_GNU_GETTEXT'",
-
- # Now part of autoconf proper, under a different name.
- 'fp_FUNC_FNMATCH' => "use `AC_FUNC_FNMATCH'",
- 'AM_SANITY_CHECK_CC' => "automatically done by `AC_PROG_CC'",
- 'AM_PROG_INSTALL' => "use `AC_PROG_INSTALL'",
- 'AM_EXEEXT' => "automatically done by `AC_PROG_(CC|CXX|F77)'",
- 'AM_CYGWIN32' => "use `AC_CYGWIN'",
- 'AM_MINGW32' => "use `AC_MINGW32'",
- 'AM_FUNC_MKTIME' => "use `AC_FUNC_MKTIME'",
- );
+# Map file names to included files (transitively closed).
+my %file_includes = ();
-# Regexp to match the above macros.
-$obsolete_rx = '\b(' . join ('|', keys %obsolete_macros) . ')\b';
+# Files which have already been added.
+my %file_added = ();
+
+# Files that have already been scanned.
+my %scanned_configure_dep = ();
+
+# Serial numbers, for files that have one.
+# The key is the basename of the file,
+# the value is the serial number represented as a list.
+my %serial = ();
# Matches a macro definition.
-$ac_defun_rx = "AC_DEFUN\\(\\[?([^],)\n]+)\\]?";
+# AC_DEFUN([macroname], ...)
+# or
+# AC_DEFUN(macroname, ...)
+# When macroname is `['-quoted , we accept any character in the name,
+# except `]'. Otherwise macroname stops on the first `]', `,', `)',
+# or `\n' encountered.
+my $ac_defun_rx =
+ "(?:AU_ALIAS|A[CU]_DEFUN|AC_DEFUN_ONCE)\\((?:\\[([^]]+)\\]|([^],)\n]+))";
# Matches an AC_REQUIRE line.
-$ac_require_rx = "AC_REQUIRE\\(\\[?([^])]*)\\]?\\)";
+my $ac_require_rx = "AC_REQUIRE\\((?:\\[([^]]+)\\]|([^],)\n]+))\\)";
-\f
+# Matches an m4_include line.
+my $m4_include_rx = "(m4_|m4_s|s)include\\((?:\\[([^]]+)\\]|([^],)\n]+))\\)";
-local (@dirlist) = &parse_arguments (@ARGV);
-&scan_m4_files (@dirlist);
-&scan_configure;
-if (! $exit_status)
-{
- &write_aclocal;
-}
-&check_acinclude;
+# Match a serial number.
+my $serial_line_rx = '^#\s*serial\s+(\S*)';
+my $serial_number_rx = '^\d+(?:\.\d+)*$';
-exit $exit_status;
+# Autoconf version
+# Set by trace_used_macros.
+my $ac_version;
+# If set, names a temporary file that must be erased on abnormal exit.
+my $erase_me;
+\f
################################################################
-# Print usage and exit.
-sub usage
+# Erase temporary file ERASE_ME. Handle signals.
+sub unlink_tmp
{
- local ($status) = @_;
+ my ($sig) = @_;
- print "Usage: aclocal [OPTIONS] ...\n\n";
- print "\
-Generate `aclocal.m4' by scanning `configure.ac' or `configure.in'
+ if ($sig)
+ {
+ verb "caught SIG$sig, bailing out";
+ }
+ if (defined $erase_me && -e $erase_me && !unlink ($erase_me))
+ {
+ fatal "could not remove `$erase_me': $!";
+ }
+ undef $erase_me;
- --acdir=DIR directory holding config files
- --help print this help, then exit
- -I DIR add directory to search list for .m4 files
- --output=FILE put output in FILE (default aclocal.m4)
- --print-ac-dir print name of directory holding m4 files
- --verbose don't be silent
- --version print version number, then exit
+ # reraise default handler.
+ if ($sig)
+ {
+ $SIG{$sig} = 'DEFAULT';
+ kill $sig => $$;
+ }
+}
-Report bugs to <bug-automake\@gnu.org>.\n";
+$SIG{'INT'} = $SIG{'TERM'} = $SIG{'QUIT'} = $SIG{'HUP'} = 'unlink_tmp';
+END { unlink_tmp }
- exit $status;
+# Check macros in acinclude.m4. If one is not used, warn.
+sub check_acinclude ()
+{
+ foreach my $key (keys %map)
+ {
+ # FIXME: should print line number of acinclude.m4.
+ msg ('syntax', "warning: macro `$key' defined in "
+ . "acinclude.m4 but never used")
+ if $map{$key} eq 'acinclude.m4' && ! exists $macro_seen{$key};
+ }
}
-# Parse command line.
-sub parse_arguments
+sub reset_maps ()
+{
+ $greatest_mtime = 0;
+ %macro_seen = ();
+ @file_order = ();
+ %map = ();
+ %map_traced_defs = ();
+ %file_contents = ();
+ %file_type = ();
+ %file_includes = ();
+ %file_added = ();
+ %scanned_configure_dep = ();
+ %invmap = ();
+ %serial = ();
+ undef &search;
+}
+
+# install_file ($SRC, $DEST)
+sub install_file ($$)
{
- local (@arglist) = @_;
- local (@dirlist);
- local ($print_and_exit) = 0;
+ my ($src, $dest) = @_;
+ my $diff_dest;
- while (@arglist)
+ if ($force_output
+ || !exists $file_contents{$dest}
+ || $file_contents{$src} ne $file_contents{$dest})
{
- if ($arglist[0] =~ /^--acdir=(.+)$/)
+ if (-e $dest)
{
- $acdir = $1;
+ msg 'note', "overwriting `$dest' with `$src'";
+ $diff_dest = $dest;
}
- elsif ($arglist[0] =~/^--output=(.+)$/)
+ else
{
- $output_file = $1;
+ msg 'note', "installing `$dest' from `$src'";
}
- elsif ($arglist[0] eq '-I')
+
+ if (@diff_command)
{
- shift (@arglist);
- push (@dirlist, $arglist[0]);
+ if (! defined $diff_dest)
+ {
+ # $dest does not exist. We create an empty one just to
+ # run diff, and we erase it afterward. Using the real
+ # the destination file (rather than a temporary file) is
+ # good when diff is run with options that display the
+ # file name.
+ #
+ # If creating $dest fails, fall back to /dev/null. At
+ # least one diff implementation (Tru64's) cannot deal
+ # with /dev/null. However working around this is not
+ # worth the trouble since nobody run aclocal on a
+ # read-only tree anyway.
+ $erase_me = $dest;
+ my $f = new IO::File "> $dest";
+ if (! defined $f)
+ {
+ undef $erase_me;
+ $diff_dest = '/dev/null';
+ }
+ else
+ {
+ $diff_dest = $dest;
+ $f->close;
+ }
+ }
+ my @cmd = (@diff_command, $diff_dest, $src);
+ $! = 0;
+ verb "running: @cmd";
+ my $res = system (@cmd);
+ Automake::FileUtils::handle_exec_errors "@cmd", 1
+ if $res;
+ unlink_tmp;
}
- elsif ($arglist[0] eq '--print-ac-dir')
+ elsif (!$dry_run)
{
- $print_and_exit = 1;
+ xsystem ('cp', $src, $dest);
}
- elsif ($arglist[0] eq '--verbose')
+ }
+}
+
+# Compare two lists of numbers.
+sub list_compare (\@\@)
+{
+ my @l = @{$_[0]};
+ my @r = @{$_[1]};
+ while (1)
+ {
+ if (0 == @l)
{
- ++$verbose;
+ return (0 == @r) ? 0 : -1;
}
- elsif ($arglist[0] eq '--version')
+ elsif (0 == @r)
{
- print "aclocal (GNU $PACKAGE) $VERSION\n\n";
- print "Copyright 2002 Free Software Foundation, Inc.\n";
- print "This is free software; see the source for copying conditions. There is NO\n";
- print "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n";
- print "Written by Tom Tromey <tromey\@redhat.com>\n";
- exit 0;
+ return 1;
}
- elsif ($arglist[0] eq '--help')
+ elsif ($l[0] < $r[0])
{
- &usage (0);
+ return -1;
}
- else
+ elsif ($l[0] > $r[0])
{
- die "aclocal: unrecognized option -- `$arglist[0]'\nTry `aclocal --help' for more information.\n";
+ return 1;
}
-
- shift (@arglist);
+ shift @l;
+ shift @r;
}
+}
+
+################################################################
+
+# scan_m4_dirs($TYPE, @DIRS)
+# --------------------------
+# Scan all M4 files installed in @DIRS for new macro definitions.
+# Register each file as of type $TYPE (one of the FT_* constants).
+sub scan_m4_dirs ($@)
+{
+ my ($type, @dirlist) = @_;
- if ($print_and_exit)
+ foreach my $m4dir (@dirlist)
{
- print $acdir, "\n";
- exit 0;
+ if (! opendir (DIR, $m4dir))
+ {
+ fatal "couldn't open directory `$m4dir': $!";
+ }
+
+ # We reverse the directory contents so that foo2.m4 gets
+ # used in preference to foo1.m4.
+ foreach my $file (reverse sort grep (! /^\./, readdir (DIR)))
+ {
+ # Only examine .m4 files.
+ next unless $file =~ /\.m4$/;
+
+ # Skip some files when running out of srcdir.
+ next if $file eq 'aclocal.m4';
+
+ my $fullfile = File::Spec->canonpath ("$m4dir/$file");
+ &scan_file ($type, $fullfile, 'aclocal');
+ }
+ closedir (DIR);
}
+}
- # Search the versioned directory near the end, and then the
- # unversioned directory last. Only do this if the user didn't
- # override acdir.
- push (@dirlist, "$acdir-$APIVERSION")
- if $acdir eq $default_acdir;
+# Scan all the installed m4 files and construct a map.
+sub scan_m4_files ()
+{
+ # First, scan configure.ac. It may contain macro definitions,
+ # or may include other files that define macros.
+ &scan_file (FT_USER, $configure_ac, 'aclocal');
+
+ # Then, scan acinclude.m4 if it exists.
+ if (-f 'acinclude.m4')
+ {
+ &scan_file (FT_USER, 'acinclude.m4', 'aclocal');
+ }
- # By default $(datadir)/aclocal doesn't exist. We don't want to
- # get an error in the case where we are searching the default
- # directory and it hasn't been created.
- push (@dirlist, $acdir)
- unless $acdir eq $default_acdir && ! -d $acdir;
+ # Finally, scan all files in our search paths.
+ scan_m4_dirs (FT_USER, @user_includes);
+ scan_m4_dirs (FT_AUTOMAKE, @automake_includes);
+ scan_m4_dirs (FT_SYSTEM, @system_includes);
- return @dirlist;
+ # Construct a new function that does the searching. We use a
+ # function (instead of just evaluating $search in the loop) so that
+ # "die" is correctly and easily propagated if run.
+ my $search = "sub search {\nmy \$found = 0;\n";
+ foreach my $key (reverse sort keys %map)
+ {
+ $search .= ('if (/\b\Q' . $key . '\E(?!\w)/) { & add_macro ("' . $key
+ . '"); $found = 1; }' . "\n");
+ }
+ $search .= "return \$found;\n};\n";
+ eval $search;
+ prog_error "$@\n search is $search" if $@;
}
################################################################
-sub scan_configure
+# Add a macro to the output.
+sub add_macro ($)
{
- die "aclocal: `configure.ac' or `configure.in' is required\n"
- if !$configure_ac;
+ my ($macro) = @_;
- open (CONFIGURE, $configure_ac)
- || die "aclocal: couldn't open `$configure_ac': $!\n";
+ # Ignore unknown required macros. Either they are not really
+ # needed (e.g., a conditional AC_REQUIRE), in which case aclocal
+ # should be quiet, or they are needed and Autoconf itself will
+ # complain when we trace for macro usage later.
+ return unless defined $map{$macro};
- # Make sure we include acinclude.m4 if it exists.
- if (-f 'acinclude.m4')
+ verb "saw macro $macro";
+ $macro_seen{$macro} = 1;
+ &add_file ($map{$macro});
+}
+
+# scan_configure_dep ($file)
+# --------------------------
+# Scan a configure dependency (configure.ac, or separate m4 files)
+# for uses of known macros and AC_REQUIREs of possibly unknown macros.
+# Recursively scan m4_included files.
+sub scan_configure_dep ($)
+{
+ my ($file) = @_;
+ # Do not scan a file twice.
+ return ()
+ if exists $scanned_configure_dep{$file};
+ $scanned_configure_dep{$file} = 1;
+
+ my $mtime = mtime $file;
+ $greatest_mtime = $mtime if $greatest_mtime < $mtime;
+
+ my $contents = exists $file_contents{$file} ?
+ $file_contents{$file} : contents $file;
+
+ my $line = 0;
+ my @rlist = ();
+ my @ilist = ();
+ foreach (split ("\n", $contents))
{
- &add_file ('acinclude.m4');
+ ++$line;
+ # Remove comments from current line.
+ s/\bdnl\b.*$//;
+ s/\#.*$//;
+ # Avoid running all the following regexes on white lines.
+ next if /^\s*$/;
+
+ while (/$m4_include_rx/go)
+ {
+ my $ifile = $2 || $3;
+ # Skip missing `sinclude'd files.
+ next if $1 ne 'm4_' && ! -f $ifile;
+ push @ilist, $ifile;
+ }
+
+ while (/$ac_require_rx/go)
+ {
+ push (@rlist, $1 || $2);
+ }
+
+ # The search function is constructed dynamically by
+ # scan_m4_files. The last parenthetical match makes sure we
+ # don't match things that look like macro assignments or
+ # AC_SUBSTs.
+ if (! &search && /(^|\s+)(AM_[A-Z0-9_]+)($|[^\]\)=A-Z0-9_])/)
+ {
+ # Macro not found, but AM_ prefix found.
+ # Make this just a warning, because we do not know whether
+ # the macro is actually used (it could be called conditionally).
+ msg ('unsupported', "$file:$line",
+ "warning: macro `$2' not found in library");
+ }
}
- while (<CONFIGURE>)
+ add_macro ($_) foreach (@rlist);
+ &scan_configure_dep ($_) foreach @ilist;
+}
+
+# add_file ($FILE)
+# ----------------
+# Add $FILE to output.
+sub add_file ($)
+{
+ my ($file) = @_;
+
+ # Only add a file once.
+ return if ($file_added{$file});
+ $file_added{$file} = 1;
+
+ scan_configure_dep $file;
+}
+
+# Point to the documentation for underquoted AC_DEFUN only once.
+my $underquoted_manual_once = 0;
+
+# scan_file ($TYPE, $FILE, $WHERE)
+# --------------------------------
+# Scan a single M4 file ($FILE), and all files it includes.
+# Return the list of included files.
+# $TYPE is one of FT_USER, FT_AUTOMAKE, or FT_SYSTEM, depending
+# on where the file comes from.
+# $WHERE is the location to use in the diagnostic if the file
+# does not exist.
+sub scan_file ($$$)
+{
+ my ($type, $file, $where) = @_;
+ my $basename = basename $file;
+
+ # Do not scan the same file twice.
+ return @{$file_includes{$file}} if exists $file_includes{$file};
+ # Prevent potential infinite recursion (if two files include each other).
+ return () if exists $file_contents{$file};
+
+ unshift @file_order, $file;
+
+ $file_type{$file} = $type;
+
+ fatal "$where: file `$file' does not exist" if ! -e $file;
+
+ my $fh = new Automake::XFile $file;
+ my $contents = '';
+ my @inc_files = ();
+ my %inc_lines = ();
+
+ my $defun_seen = 0;
+ my $serial_seen = 0;
+ my $serial_older = 0;
+
+ while ($_ = $fh->getline)
{
- # Remove comments from current line.
- s/\bdnl\b.*$//;
- s/\#.*$//;
+ # Ignore `##' lines.
+ next if /^##/;
- if (/$obsolete_rx/o)
+ $contents .= $_;
+ my $line = $_;
+
+ if ($line =~ /$serial_line_rx/go)
{
- local ($hint) = '';
- if ($obsolete_macros{$1} ne '')
+ my $number = $1;
+ if ($number !~ /$serial_number_rx/go)
+ {
+ msg ('syntax', "$file:$.",
+ "warning: ill-formed serial number `$number', "
+ . "expecting a version string with only digits and dots");
+ }
+ elsif ($defun_seen)
+ {
+ # aclocal removes all definitions from M4 file with the
+ # same basename if a greater serial number is found.
+ # Encountering a serial after some macros will undefine
+ # these macros...
+ msg ('syntax', "$file:$.",
+ 'the serial number must appear before any macro definition');
+ }
+ # We really care about serials only for non-automake macros
+ # and when --install is used. But the above diagnostics are
+ # made regardless of this, because not using --install is
+ # not a reason not the fix macro files.
+ elsif ($install && $type != FT_AUTOMAKE)
{
- $hint = '; ' . $obsolete_macros{$1};
+ $serial_seen = 1;
+ my @new = split (/\./, $number);
+
+ verb "$file:$.: serial $number";
+
+ if (!exists $serial{$basename}
+ || list_compare (@new, @{$serial{$basename}}) > 0)
+ {
+ # Delete any definition we knew from the old macro.
+ foreach my $def (@{$invmap{$basename}})
+ {
+ verb "$file:$.: ignoring previous definition of $def";
+ delete $map{$def};
+ }
+ $invmap{$basename} = [];
+ $serial{$basename} = \@new;
+ }
+ else
+ {
+ $serial_older = 1;
+ }
}
- warn "aclocal: $configure_ac: $.: `$1' is obsolete$hint\n";
- $exit_status = 1;
- next;
}
- # Search for things we know about. The "search" sub is
- # constructed dynamically by scan_m4_files. The last
- # parenthethical match makes sure we don't match things that
- # look like macro assignments or AC_SUBSTs.
- if (! &search && /(^|\s+)(AM_[A-Z0-9_]+)($|[^\]\)=A-Z0-9_])/)
+ # Remove comments from current line.
+ # Do not do it earlier, because the serial line is a comment.
+ $line =~ s/\bdnl\b.*$//;
+ $line =~ s/\#.*$//;
+
+ while ($line =~ /$ac_defun_rx/go)
{
- # Macro not found, but AM_ prefix found.
- warn "aclocal: $configure_ac: $.: macro `$2' not found in library\n";
- $exit_status = 1;
+ $defun_seen = 1;
+ if (! defined $1)
+ {
+ msg ('syntax', "$file:$.", "warning: underquoted definition of $2"
+ . "\n run info '(automake)Extending aclocal'\n"
+ . " or see http://sources.redhat.com/automake/"
+ . "automake.html#Extending-aclocal")
+ unless $underquoted_manual_once;
+ $underquoted_manual_once = 1;
+ }
+
+ # If this macro does not have a serial and we have already
+ # seen a macro with the same basename earlier, we should
+ # ignore the macro (don't exit immediately so we can still
+ # diagnose later #serial numbers and underquoted macros).
+ $serial_older ||= ($type != FT_AUTOMAKE
+ && !$serial_seen && exists $serial{$basename});
+
+ my $macro = $1 || $2;
+ if (!$serial_older && !defined $map{$macro})
+ {
+ verb "found macro $macro in $file: $.";
+ $map{$macro} = $file;
+ push @{$invmap{$basename}}, $macro;
+ }
+ else
+ {
+ # Note: we used to give an error here if we saw a
+ # duplicated macro. However, this turns out to be
+ # extremely unpopular. It causes actual problems which
+ # are hard to work around, especially when you must
+ # mix-and-match tool versions.
+ verb "ignoring macro $macro in $file: $.";
+ }
+ }
+
+ while ($line =~ /$m4_include_rx/go)
+ {
+ my $ifile = $2 || $3;
+ # Skip missing `sinclude'd files.
+ next if $1 ne 'm4_' && ! -f $ifile;
+ push (@inc_files, $ifile);
+ $inc_lines{$ifile} = $.;
}
}
- close (CONFIGURE);
+ # Ignore any file that has an old serial (or no serial if we know
+ # another one with a serial).
+ return ()
+ if ($serial_older ||
+ ($type != FT_AUTOMAKE && !$serial_seen && exists $serial{$basename}));
+
+ $file_contents{$file} = $contents;
+
+ # For some reason I don't understand, it does not work
+ # to do `map { scan_file ($_, ...) } @inc_files' below.
+ # With Perl 5.8.2 it undefines @inc_files.
+ my @copy = @inc_files;
+ my @all_inc_files = (@inc_files,
+ map { scan_file ($type, $_,
+ "$file:$inc_lines{$_}") } @copy);
+ $file_includes{$file} = \@all_inc_files;
+ return @all_inc_files;
}
-################################################################
-
-# Check macros in acinclude.m4. If one is not used, warn.
-sub check_acinclude
+# strip_redundant_includes (%FILES)
+# ---------------------------------
+# Each key in %FILES is a file that must be present in the output.
+# However some of these files might already include other files in %FILES,
+# so there is no point in including them another time.
+# This removes items of %FILES which are already included by another file.
+sub strip_redundant_includes (%)
{
- local ($key);
-
- foreach $key (keys %map)
+ my %files = @_;
+
+ # Always include acinclude.m4, even if it does not appear to be used.
+ $files{'acinclude.m4'} = 1 if -f 'acinclude.m4';
+ # File included by $configure_ac are redundant.
+ $files{$configure_ac} = 1;
+
+ # Files at the end of @file_order should override those at the beginning,
+ # so it is important to preserve these trailing files. We can remove
+ # a file A if it is going to be output before a file B that includes
+ # file A, not the converse.
+ foreach my $file (reverse @file_order)
{
- next unless $map{$key} eq 'acinclude.m4';
- if (! $macro_seen{$key})
+ next unless exists $files{$file};
+ foreach my $ifile (@{$file_includes{$file}})
{
- # FIXME: should print line number of acinclude.m4.
- warn "aclocal: macro `$key' defined in acinclude.m4 but never used\n";
+ next unless exists $files{$ifile};
+ delete $files{$ifile};
+ verb "$ifile is already included by $file";
}
}
+
+ # configure.ac is implicitly included.
+ delete $files{$configure_ac};
+
+ return %files;
}
-################################################################
+sub trace_used_macros ()
+{
+ my %files = map { $map{$_} => 1 } keys %macro_seen;
+ %files = strip_redundant_includes %files;
+
+ my $traces = ($ENV{AUTOM4TE} || 'autom4te');
+ $traces .= " --language Autoconf-without-aclocal-m4 ";
+ # All candidate files.
+ $traces .= join (' ',
+ (map { "'$_'" }
+ (grep { exists $files{$_} } @file_order))) . " ";
+ # All candidate macros.
+ $traces .= join (' ',
+ (map { "--trace='$_:\$f::\$n::\$1'" }
+ ('AC_DEFUN',
+ 'AC_DEFUN_ONCE',
+ 'AU_DEFUN',
+ '_AM_AUTOCONF_VERSION')),
+ # Do not trace $1 for all other macros as we do
+ # not need it and it might contains harmful
+ # characters (like newlines).
+ (map { "--trace='$_:\$f::\$n'" } (keys %macro_seen)));
+
+ verb "running $traces $configure_ac";
+
+ my $tracefh = new Automake::XFile ("$traces $configure_ac |");
+
+ my %traced = ();
+
+ while ($_ = $tracefh->getline)
+ {
+ chomp;
+ my ($file, $macro, $arg1) = split (/::/);
-# Scan all the installed m4 files and construct a map.
-sub scan_m4_files
+ $traced{$macro} = 1 if exists $macro_seen{$macro};
+
+ $map_traced_defs{$arg1} = $file
+ if ($macro eq 'AC_DEFUN'
+ || $macro eq 'AC_DEFUN_ONCE'
+ || $macro eq 'AU_DEFUN');
+
+ $ac_version = $arg1 if $macro eq '_AM_AUTOCONF_VERSION';
+ }
+
+ $tracefh->close;
+
+ return %traced;
+}
+
+sub scan_configure ()
{
- local (@dirlist) = @_;
+ # Make sure we include acinclude.m4 if it exists.
+ if (-f 'acinclude.m4')
+ {
+ add_file ('acinclude.m4');
+ }
+ scan_configure_dep ($configure_ac);
+}
+
+################################################################
- # First, scan acinclude.m4 if it exists.
- if (-f 'acinclude.m4')
+# Write output.
+# Return 0 iff some files were installed locally.
+sub write_aclocal ($@)
+{
+ my ($output_file, @macros) = @_;
+ my $output = '';
+
+ my %files = ();
+ # Get the list of files containing definitions for the macros used.
+ # (Filter out unused macro definitions with $map_traced_defs. This
+ # can happen when an Autoconf macro is conditionally defined:
+ # aclocal sees the potential definition, but this definition is
+ # actually never processed and the Autoconf implementation is used
+ # instead.)
+ for my $m (@macros)
{
- $file_contents{'acinclude.m4'} = &scan_file ('acinclude.m4');
+ $files{$map{$m}} = 1
+ if (exists $map_traced_defs{$m}
+ && $map{$m} eq $map_traced_defs{$m});
}
+ # Do not explicitly include a file that is already indirectly included.
+ %files = strip_redundant_includes %files;
+
+ my $installed = 0;
- local ($m4dir);
- foreach $m4dir (@dirlist)
+ for my $file (grep { exists $files{$_} } @file_order)
{
- opendir (DIR, $m4dir)
- || die "aclocal: couldn't open directory `$m4dir': $!\n";
- local ($file, $fullfile);
- foreach $file (sort grep (! /^\./, readdir (DIR)))
+ # Check the time stamp of this file, and of all files it includes.
+ for my $ifile ($file, @{$file_includes{$file}})
{
- # Only examine .m4 files.
- next unless $file =~ /\.m4$/;
-
- # Skip some files when running out of srcdir.
- next if $file eq 'aclocal.m4';
+ my $mtime = mtime $ifile;
+ $greatest_mtime = $mtime if $greatest_mtime < $mtime;
+ }
- $fullfile = $m4dir . '/' . $file;
- $file_contents{$fullfile} = &scan_file ($fullfile);
+ # If the file to add looks like outside the project, copy it
+ # to the output. The regex catches filenames starting with
+ # things like `/', `\', or `c:\'.
+ if ($file_type{$file} != FT_USER
+ || $file =~ m,^(?:\w:)?[\\/],)
+ {
+ if (!$install || $file_type{$file} != FT_SYSTEM)
+ {
+ # Copy the file into aclocal.m4.
+ $output .= $file_contents{$file} . "\n";
+ }
+ else
+ {
+ # Install the file (and any file it includes).
+ my $dest;
+ for my $ifile (@{$file_includes{$file}}, $file)
+ {
+ $dest = "$user_includes[0]/" . basename $ifile;
+ verb "installing $ifile to $dest";
+ install_file ($ifile, $dest);
+ }
+ $installed = 1;
+ }
}
- closedir (DIR);
+ else
+ {
+ # Otherwise, simply include the file.
+ $output .= "m4_include([$file])\n";
+ }
+ }
+
+ if ($installed)
+ {
+ verb "running aclocal anew, because some files were installed locally";
+ return 0;
+ }
+
+ # Nothing to output?!
+ # FIXME: Shouldn't we diagnose this?
+ return 1 if ! length ($output);
+
+ if ($ac_version)
+ {
+ # Do not use "$output_file" here for the same reason we do not
+ # use it in the header below. autom4te will output the name of
+ # the file in the diagnostic anyway.
+ $output = "m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [$ac_version],,
+[m4_warning([this file was generated for autoconf $ac_version.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+$output";
+ }
+
+ # We used to print `# $output_file generated automatically etc.' But
+ # this creates spurious differences when using autoreconf. Autoreconf
+ # creates aclocal.m4t and then rename it to aclocal.m4, but the
+ # rebuild rules generated by Automake create aclocal.m4 directly --
+ # this would gives two ways to get the same file, with a different
+ # name in the header.
+ $output = "# generated automatically by aclocal $VERSION -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+$output";
+
+ # We try not to update $output_file unless necessary, because
+ # doing so invalidate Autom4te's cache and therefore slows down
+ # tools called after aclocal.
+ #
+ # We need to overwrite $output_file in the following situations.
+ # * The --force option is in use.
+ # * One of the dependencies is younger.
+ # (Not updating $output_file in this situation would cause
+ # make to call aclocal in loop.)
+ # * The contents of the current file are different from what
+ # we have computed.
+ if (!$force_output
+ && $greatest_mtime < mtime ($output_file)
+ && $output eq contents ($output_file))
+ {
+ verb "$output_file unchanged";
+ return 1;
}
- # Construct a new function that does the searching. We use a
- # function (instead of just evalling $search in the loop) so that
- # "die" is correctly and easily propagated if run.
- my $search = "sub search {\nmy \$found = 0;\n";
- foreach my $key (reverse sort keys %map)
+ verb "writing $output_file";
+
+ if (!$dry_run)
{
- # EXPR is a regexp matching the name of the macro.
- (my $expr = $key) =~ s/(\W)/\\$1/g;
- $search .= ('if (/\b' . $key . '\b/) { & add_macro (' . $key
- . '); $found = 1; }' . "\n");
+ if (-e $output_file && !unlink $output_file)
+ {
+ fatal "could not remove `$output_file': $!";
+ }
+ my $out = new Automake::XFile "> $output_file";
+ print $out $output;
}
- $search .= "return \$found;\n};\n";
- eval $search;
- die "internal error: $@\n search is $search" if $@;
+ return 1;
}
################################################################
-# Add a macro to the output.
-sub add_macro
+# Print usage and exit.
+sub usage ($)
{
- local ($macro) = @_;
+ my ($status) = @_;
- # We want to ignore AC_ macros. However, if an AC_ macro is
- # defined in (eg) acinclude.m4, then we want to make sure we mark
- # it as seen.
- return if $macro =~ /^AC_/ && ! defined $map{$macro};
+ print "Usage: aclocal [OPTIONS] ...
- if (! defined $map{$macro})
- {
- warn "aclocal: macro `$macro' required but not defined\n";
- $exit_status = 1;
- return;
- }
+Generate `aclocal.m4' by scanning `configure.ac' or `configure.in'
+
+Options:
+ --acdir=DIR directory holding config files (for debugging)
+ --diff[=COMMAND] run COMMAND [diff -u] on M4 files that would be
+ changed (implies --install and --dry-run)
+ --dry-run pretend to, but do not actually update any file
+ --force always update output file
+ --help print this help, then exit
+ -I DIR add directory to search list for .m4 files
+ --install copy third-party files to the first -I directory
+ --output=FILE put output in FILE (default aclocal.m4)
+ --print-ac-dir print name of directory holding m4 files, then exit
+ --verbose don't be silent
+ --version print version number, then exit
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY
+
+Warning categories include:
+ `syntax' dubious syntactic constructs (default)
+ `unsupported' unknown macros (default)
+ `all' all the warnings (default)
+ `no-CATEGORY' turn off warnings in CATEGORY
+ `none' turn off all the warnings
+ `error' treat warnings as errors
- print STDERR "aclocal: saw macro $macro\n" if $verbose;
- $macro_seen{$macro} = 1;
- &add_file ($map{$macro});
+Report bugs to <bug-automake\@gnu.org>.\n";
+
+ exit $status;
}
-# Add a file to output.
-sub add_file
+# Print version and exit.
+sub version()
{
- local ($file) = @_;
+ print <<EOF;
+aclocal (GNU $PACKAGE) $VERSION
+Copyright (C) 2009 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Tom Tromey <tromey\@redhat.com>
+ and Alexandre Duret-Lutz <adl\@gnu.org>.
+EOF
+ exit 0;
+}
- # Only add a file once.
- return if ($file_seen{$file});
- $file_seen{$file} = 1;
+# Parse command line.
+sub parse_arguments ()
+{
+ my $print_and_exit = 0;
+ my $diff_command;
- $output .= $file_contents{$file} . "\n";
- local ($a, @rlist);
- foreach (split ("\n", $file_contents{$file}))
+ my %cli_options =
+ (
+ 'acdir=s' => sub # Setting --acdir overrides both the
+ { # automake (versioned) directory and the
+ # public (unversioned) system directory.
+ @automake_includes = ();
+ @system_includes = ($_[1])
+ },
+ 'diff:s' => \$diff_command,
+ 'dry-run' => \$dry_run,
+ 'force' => \$force_output,
+ 'I=s' => \@user_includes,
+ 'install' => \$install,
+ 'output=s' => \$output_file,
+ 'print-ac-dir' => \$print_and_exit,
+ 'verbose' => sub { setup_channel 'verb', silent => 0; },
+ 'W|warnings=s' => \&parse_warnings,
+ );
+ use Getopt::Long;
+ Getopt::Long::config ("bundling", "pass_through");
+
+ # See if --version or --help is used. We want to process these before
+ # anything else because the GNU Coding Standards require us to
+ # `exit 0' after processing these options, and we can't guarantee this
+ # if we treat other options first. (Handling other options first
+ # could produce error diagnostics, and in this condition it is
+ # confusing if aclocal does `exit 0'.)
+ my %cli_options_1st_pass =
+ (
+ 'version' => \&version,
+ 'help' => sub { usage(0); },
+ # Recognize all other options (and their arguments) but do nothing.
+ map { $_ => sub {} } (keys %cli_options)
+ );
+ my @ARGV_backup = @ARGV;
+ Getopt::Long::GetOptions %cli_options_1st_pass
+ or exit 1;
+ @ARGV = @ARGV_backup;
+
+ # Now *really* process the options. This time we know that --help
+ # and --version are not present, but we specify them nonetheless so
+ # that ambiguous abbreviation are diagnosed.
+ Getopt::Long::GetOptions %cli_options, 'version' => sub {}, 'help' => sub {}
+ or exit 1;
+
+ if (@ARGV)
{
- # This is a hack for Perl 4.
- $a = $_;
- if ($a =~ /$ac_require_rx/g)
+ my %argopts;
+ for my $k (keys %cli_options)
{
- push (@rlist, $1);
+ if ($k =~ /(.*)=s$/)
+ {
+ map { $argopts{(length ($_) == 1)
+ ? "-$_" : "--$_" } = 1; } (split (/\|/, $1));
+ }
}
-
- # Remove comments from current line.
- s/\bdnl\b.*$//;
- s/\#.*$//;
-
- # The search function is constructed dynamically by
- # scan_m4_files. The last parenthethical match makes sure we
- # don't match things that look like macro assignments or
- # AC_SUBSTs.
- if (! &search && /(^|\s+)(AM_[A-Z0-9_]+)($|[^\]\)=A-Z0-9_])/)
+ if (exists $argopts{$ARGV[0]})
{
- # Macro not found, but AM_ prefix found.
- warn "aclocal: $configure_ac: $.: macro `$2' not found in library\n";
- $exit_status = 1;
+ fatal ("option `$ARGV[0]' requires an argument\n"
+ . "Try `$0 --help' for more information.");
+ }
+ else
+ {
+ fatal ("unrecognized option `$ARGV[0]'\n"
+ . "Try `$0 --help' for more information.");
}
}
- local ($macro);
- foreach $macro (@rlist)
+ if ($print_and_exit)
{
- &add_macro ($macro);
+ print "@system_includes\n";
+ exit 0;
}
-}
-# Scan a single M4 file. Return contents.
-sub scan_file
-{
- local ($file) = @_;
-
- my $fh = new Automake::XFile $file;
- my $contents = '';
- while ($_ = $fh->getline)
+ if (defined $diff_command)
{
- # Ignore `##' lines.
- next if /^##/;
+ $diff_command = 'diff -u' if $diff_command eq '';
+ @diff_command = split (' ', $diff_command);
+ $install = 1;
+ $dry_run = 1;
+ }
- $contents .= $_;
+ if ($install && !@user_includes)
+ {
+ fatal ("--install should copy macros in the directory indicated by the"
+ . "\nfirst -I option, but no -I was supplied.");
+ }
- if (/$ac_defun_rx/)
+ if (! -d $system_includes[0])
+ {
+ # By default $(datadir)/aclocal doesn't exist. We don't want to
+ # get an error in the case where we are searching the default
+ # directory and it hasn't been created. (We know
+ # @system_includes has its default value if @automake_includes
+ # is not empty, because --acdir is the only way to change this.)
+ @system_includes = () if @automake_includes;
+ }
+ else
+ {
+ # Finally, adds any directory listed in the `dirlist' file.
+ if (open (DIRLIST, "$system_includes[0]/dirlist"))
{
- if (! defined $map{$1})
+ while (<DIRLIST>)
{
- $map{$1} = $file;
+ # Ignore '#' lines.
+ next if /^#/;
+ # strip off newlines and end-of-line comments
+ s/\s*\#.*$//;
+ chomp;
+ foreach my $dir (glob)
+ {
+ push (@system_includes, $dir) if -d $dir;
+ }
}
-
- # Note: we used to give an error here if we saw a
- # duplicated macro. However, this turns out to be
- # extremely unpopular. It causes actual problems which
- # are hard to work around, especially when you must
- # mix-and-match tool versions.
-
- print STDERR "aclocal: found macro $1 in $file: $.\n" if $verbose;
+ close (DIRLIST);
}
}
-
- return $contents;
}
################################################################
-# Write output.
-sub write_aclocal
-{
- return if ! length ($output);
-
- print STDERR "aclocal: writing $output_file\n" if $verbose;
-
- my $out = new Automake::XFile "> $output_file";
- print $out
-"# $output_file generated automatically by aclocal $VERSION -*- Autoconf -*-
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-$output";
-}
+parse_WARNINGS; # Parse the WARNINGS environment variable.
+parse_arguments;
+$configure_ac = require_configure_ac;
+
+# We may have to rerun aclocal if some file have been installed, but
+# it should not happen more than once. The reason we must run again
+# is that once the file has been moved from /usr/share/aclocal/ to the
+# local m4/ directory it appears at a new place in the search path,
+# hence it should be output at a different position in aclocal.m4. If
+# we did not rerun aclocal, the next run of aclocal would produce a
+# different aclocal.m4.
+my $loop = 0;
+while (1)
+ {
+ ++$loop;
+ prog_error "Too many loops." if $loop > 2;
+
+ reset_maps;
+ scan_m4_files;
+ scan_configure;
+ last if $exit_code;
+ my %macro_traced = trace_used_macros;
+ last if write_aclocal ($output_file, keys %macro_traced);
+ last if $dry_run;
+ }
+check_acinclude;
+
+exit $exit_code;
+
+### Setup "GNU" style for perl-mode and cperl-mode.
+## Local Variables:
+## perl-indent-level: 2
+## perl-continued-statement-offset: 2
+## perl-continued-brace-offset: 0
+## perl-brace-offset: 0
+## perl-brace-imaginary-offset: 0
+## perl-label-offset: -2
+## cperl-indent-level: 2
+## cperl-brace-offset: 0
+## cperl-continued-brace-offset: 0
+## cperl-label-offset: -2
+## cperl-extra-newline-before-brace: t
+## cperl-merge-trailing-else: nil
+## cperl-continued-statement-offset: 2
+## End: