-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
-## Copyright (C) 1996-1999 Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 39 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
+dnl @synopsis AC_FUNC_VSNPRINTF_C99
+dnl
+dnl Check whether there is a vsnprintf() function with C99 semantics installed.
+dnl
+AC_DEFUN([AC_FUNC_VSNPRINTF_C99],
+[AC_CACHE_CHECK(for C99 vsnprintf,
+ ac_cv_func_vsnprintf_c99,
+[AC_TRY_RUN(
+[#include <stdio.h>
+#include <stdarg.h>
+
+int
+doit(char * s, ...)
+{
+ char buffer[32];
+ va_list args;
+ int r;
+
+ va_start(args, s);
+ r = vsnprintf(buffer, 5, s, args);
+ va_end(args);
+
+ if (r != 7)
+ exit(1);
+
+ /* AIX 5.1 and Solaris seems to have a half-baked vsnprintf()
+ implementation. The above will return 7 but if you replace
+ the size of the buffer with 0, it borks! */
+ va_start(args, s);
+ r = vsnprintf(buffer, 0, s, args);
+ va_end(args);
+
+ if (r != 7)
+ exit(1);
+
+ exit(0);
+}
+
+int
+main(void)
+{
+ doit("1234567");
+ exit(1);
+}], ac_cv_func_vsnprintf_c99=yes, ac_cv_func_vsnprintf_c99=no, ac_cv_func_vsnprintf_c99=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target has a C99 vsnprintf(), you can get around this
+dnl by setting ac_func_vsnprintf_c99 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_vsnprintf_c99 = yes; then
+ AC_DEFINE(HAVE_C99_VSNPRINTF, 1,
+ [Define if you have a version of the vsnprintf function
+ with semantics as specified by the ISO C99 standard.])
+fi
+])# AC_FUNC_VSNPRINTF_C99
+
+
+dnl @synopsis AC_FUNC_SNPRINTF_C99
+dnl
+dnl Check whether there is a snprintf() function with C99 semantics installed.
+dnl
+AC_DEFUN([AC_FUNC_SNPRINTF_C99],
+[AC_CACHE_CHECK(for C99 snprintf,
+ ac_cv_func_snprintf_c99,
+[AC_TRY_RUN(
+[#include <stdio.h>
+#include <stdarg.h>
+
+int
+doit()
+{
+ char buffer[32];
+ va_list args;
+ int r;
+
+ r = snprintf(buffer, 5, "1234567");
+
+ if (r != 7)
+ exit(1);
+
+ r = snprintf(buffer, 0, "1234567");
+
+ if (r != 7)
+ exit(1);
+
+ r = snprintf(NULL, 0, "1234567");
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
+ if (r != 7)
+ exit(1);
+
+ exit(0);
+}
+
+int
+main(void)
+{
+ doit();
+ exit(1);
+}], ac_cv_func_snprintf_c99=yes, ac_cv_func_snprintf_c99=no, ac_cv_func_snprintf_c99=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target has a C99 snprintf(), you can get around this
+dnl by setting ac_func_snprintf_c99 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_snprintf_c99 = yes; then
+ AC_DEFINE(HAVE_C99_SNPRINTF, 1,
+ [Define if you have a version of the snprintf function
+ with semantics as specified by the ISO C99 standard.])
+fi
+])# AC_FUNC_SNPRINTF_C99
+
+
+dnl @synopsis AC_FUNC_PRINTF_UNIX98
+dnl
+dnl Check whether the printf() family supports Unix98 %n$ positional parameters
dnl
+AC_DEFUN([AC_FUNC_PRINTF_UNIX98],
+[AC_CACHE_CHECK(whether printf supports positional parameters,
+ ac_cv_func_printf_unix98,
+[AC_TRY_RUN(
+[#include <stdio.h>
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
+int
+main (void)
+{
+ char buffer[128];
+
+ sprintf (buffer, "%2\$d %3\$d %1\$d", 1, 2, 3);
+ if (strcmp ("2 3 1", buffer) == 0)
+ exit (0);
+ exit (1);
+}], ac_cv_func_printf_unix98=yes, ac_cv_func_printf_unix98=no, ac_cv_func_printf_unix98=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target printf() supports positional parameters, you can get around
+dnl this by setting ac_func_printf_unix98 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_printf_unix98 = yes; then
+ AC_DEFINE(HAVE_UNIX98_PRINTF, 1,
+ [Define if your printf function family supports positional parameters
+ as specified by Unix98.])
+fi
+])# AC_FUNC_PRINTF_UNIX98
+
+# Checks the location of the XML Catalog
+# Usage:
+# JH_PATH_XML_CATALOG([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+# Defines XMLCATALOG and XML_CATALOG_FILE substitutions
+AC_DEFUN([JH_PATH_XML_CATALOG],
+[
+ # check for the presence of the XML catalog
+ AC_ARG_WITH([xml-catalog],
+ AC_HELP_STRING([--with-xml-catalog=CATALOG],
+ [path to xml catalog to use]),,
+ [with_xml_catalog=/etc/xml/catalog])
+ jh_found_xmlcatalog=true
+ XML_CATALOG_FILE="$with_xml_catalog"
+ AC_SUBST([XML_CATALOG_FILE])
+ AC_MSG_CHECKING([for XML catalog ($XML_CATALOG_FILE)])
+ if test -f "$XML_CATALOG_FILE"; then
+ AC_MSG_RESULT([found])
+ else
+ jh_found_xmlcatalog=false
+ AC_MSG_RESULT([not found])
fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+
+ # check for the xmlcatalog program
+ AC_PATH_PROG(XMLCATALOG, xmlcatalog, no)
+ if test "x$XMLCATALOG" = xno; then
+ jh_found_xmlcatalog=false
+ fi
+
+ if $jh_found_xmlcatalog; then
+ ifelse([$1],,[:],[$1])
+ else
+ ifelse([$2],,[AC_MSG_ERROR([could not find XML catalog])],[$2])
fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
])
-esac
+
+# Checks if a particular URI appears in the XML catalog
+# Usage:
+# JH_CHECK_XML_CATALOG(URI, [FRIENDLY-NAME], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+AC_DEFUN([JH_CHECK_XML_CATALOG],
+[
+ AC_REQUIRE([JH_PATH_XML_CATALOG],[JH_PATH_XML_CATALOG(,[:])])dnl
+ AC_MSG_CHECKING([for ifelse([$2],,[$1],[$2]) in XML catalog])
+ if $jh_found_xmlcatalog && \
+ AC_RUN_LOG([$XMLCATALOG --noout "$XML_CATALOG_FILE" "$1" >&2]); then
+ AC_MSG_RESULT([found])
+ ifelse([$3],,,[$3
+])dnl
+ else
+ AC_MSG_RESULT([not found])
+ ifelse([$4],,
+ [AC_MSG_ERROR([could not find ifelse([$2],,[$1],[$2]) in XML catalog])],
+ [$4])
+ fi
])
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+
+# signed.m4 serial 1 (gettext-0.10.40)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([bh_C_SIGNED],
+[
+ AC_CACHE_CHECK([for signed], bh_cv_c_signed,
+ [AC_TRY_COMPILE(, [signed char x;], bh_cv_c_signed=yes, bh_cv_c_signed=no)])
+ if test $bh_cv_c_signed = no; then
+ AC_DEFINE(signed, ,
+ [Define to empty if the C compiler doesn't support this keyword.])
+ fi
])
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+
+# longlong.m4 serial 4
+dnl Copyright (C) 1999-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_LONG_LONG if 'long long' works.
+
+AC_DEFUN([jm_AC_TYPE_LONG_LONG],
+[
+ AC_CACHE_CHECK([for long long], ac_cv_type_long_long,
+ [AC_TRY_LINK([long long ll = 1LL; int i = 63;],
+ [long long llmax = (long long) -1;
+ return ll << i | ll >> i | llmax / ll | llmax % ll;],
+ ac_cv_type_long_long=yes,
+ ac_cv_type_long_long=no)])
+ if test $ac_cv_type_long_long = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1,
+ [Define if you have the 'long long' type.])
+ fi
])
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+
+# longdouble.m4 serial 1 (gettext-0.11.6)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+dnl Test whether the compiler supports the 'long double' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_LONGDOUBLE],
+[
+ AC_CACHE_CHECK([for long double], gt_cv_c_long_double,
+ [if test "$GCC" = yes; then
+ gt_cv_c_long_double=yes
+ else
+ AC_TRY_COMPILE([
+ /* The Stardent Vistra knows sizeof(long double), but does not support it. */
+ long double foo = 0.0;
+ /* On Ultrix 4.3 cc, long double is 4 and double is 8. */
+ int array [2*(sizeof(long double) >= sizeof(double)) - 1];
+ ], ,
+ gt_cv_c_long_double=yes, gt_cv_c_long_double=no)
+ fi])
+ if test $gt_cv_c_long_double = yes; then
+ AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the 'long double' type.])
+ fi
])
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AC_PROG_LD_GNU
+
+
+# wchar_t.m4 serial 1 (gettext-0.11.6)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+dnl Test whether <stddef.h> has the 'wchar_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WCHAR_T],
+[
+ AC_CACHE_CHECK([for wchar_t], gt_cv_c_wchar_t,
+ [AC_TRY_COMPILE([#include <stddef.h>
+ wchar_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wchar_t=yes, gt_cv_c_wchar_t=no)])
+ if test $gt_cv_c_wchar_t = yes; then
+ AC_DEFINE(HAVE_WCHAR_T, 1, [Define if you have the 'wchar_t' type.])
+ fi
])
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
+
+# wint_t.m4 serial 1
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+dnl Test whether <wchar.h> has the 'wint_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WINT_T],
+[
+ AC_CACHE_CHECK([for wint_t], gt_cv_c_wint_t,
+ [AC_TRY_COMPILE([#include <wchar.h>
+ wint_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wint_t=yes, gt_cv_c_wint_t=no)])
+ if test $gt_cv_c_wint_t = yes; then
+ AC_DEFINE(HAVE_WINT_T, 1, [Define if you have the 'wint_t' type.])
+ fi
])
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
+
+# intmax_t.m4 serial 1
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define intmax_t to 'long' or 'long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([jm_AC_TYPE_INTMAX_T],
+[
+ dnl For simplicity, we assume that a header file defines 'intmax_t' if and
+ dnl only if it defines 'uintmax_t'.
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
+ AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
+ test $ac_cv_type_long_long = yes \
+ && ac_type='long long' \
+ || ac_type='long'
+ AC_DEFINE_UNQUOTED(intmax_t, $ac_type,
+ [Define to long or long long if <inttypes.h> and <stdint.h> don't define.])
+ else
+ AC_DEFINE(HAVE_INTMAX_T, 1,
+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
])
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$host" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
+dnl An alternative would be to explicitly test for 'intmax_t'.
+
+AC_DEFUN([gt_AC_TYPE_INTMAX_T],
+[
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ AC_CACHE_CHECK(for intmax_t, gt_cv_c_intmax_t,
+ [AC_TRY_COMPILE([
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+], [intmax_t x = -1;], gt_cv_c_intmax_t=yes, gt_cv_c_intmax_t=no)])
+ if test $gt_cv_c_intmax_t = yes; then
+ AC_DEFINE(HAVE_INTMAX_T, 1,
+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+ else
+ AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
+ test $ac_cv_type_long_long = yes \
+ && ac_type='long long' \
+ || ac_type='long'
+ AC_DEFINE_UNQUOTED(intmax_t, $ac_type,
+ [Define to long or long long if <stdint.h> and <inttypes.h> don't define.])
+ fi
])
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+
+# stdint_h.m4 serial 3 (gettext-0.11.6)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <stdint.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_stdint_h=yes,
+ jm_ac_cv_header_stdint_h=no)])
+ if test $jm_ac_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+ [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
])
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
+
+# inttypes_h.m4 serial 5 (gettext-0.11.6)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_inttypes_h=yes,
+ jm_ac_cv_header_inttypes_h=no)])
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+ [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
fi
])
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to quiet aclocal about the macro not being used
-if(a,b,[AC_DISABLE_FAST_INSTALL])dnl
+
+m4_include(acglib.m4)dnl
+m4_include(glib/libcharset/codeset.m4)dnl
+m4_include(glib/libcharset/glibc21.m4)dnl
+m4_include(m4macros/glib-gettext.m4)dnl