-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
-## Copyright (C) 1996-1999 Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
+dnl @synopsis AC_FUNC_VSNPRINTF_C99
+dnl
+dnl Check whether there is a vsnprintf() function with C99 semantics installed.
+dnl
+AC_DEFUN([AC_FUNC_VSNPRINTF_C99],
+[AC_CACHE_CHECK(for C99 vsnprintf,
+ ac_cv_func_vsnprintf_c99,
+[AC_TRY_RUN(
+[#include <stdio.h>
+#include <stdarg.h>
+
+int
+doit(char * s, ...)
+{
+ char buffer[32];
+ va_list args;
+ int r;
+
+ va_start(args, s);
+ r = vsnprintf(buffer, 5, s, args);
+ va_end(args);
+
+ if (r != 7)
+ exit(1);
+
+ /* AIX 5.1 and Solaris seems to have a half-baked vsnprintf()
+ implementation. The above will return 7 but if you replace
+ the size of the buffer with 0, it borks! */
+ va_start(args, s);
+ r = vsnprintf(buffer, 0, s, args);
+ va_end(args);
+
+ if (r != 7)
+ exit(1);
+
+ exit(0);
+}
+
+int
+main(void)
+{
+ doit("1234567");
+ exit(1);
+}], ac_cv_func_vsnprintf_c99=yes, ac_cv_func_vsnprintf_c99=no, ac_cv_func_vsnprintf_c99=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target has a C99 vsnprintf(), you can get around this
+dnl by setting ac_func_vsnprintf_c99 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_vsnprintf_c99 = yes; then
+ AC_DEFINE(HAVE_C99_VSNPRINTF, 1,
+ [Define if you have a version of the vsnprintf function
+ with semantics as specified by the ISO C99 standard.])
+fi
+])# AC_FUNC_VSNPRINTF_C99
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
+
+dnl @synopsis AC_FUNC_SNPRINTF_C99
+dnl
+dnl Check whether there is a snprintf() function with C99 semantics installed.
dnl
+AC_DEFUN([AC_FUNC_SNPRINTF_C99],
+[AC_CACHE_CHECK(for C99 snprintf,
+ ac_cv_func_snprintf_c99,
+[AC_TRY_RUN(
+[#include <stdio.h>
+#include <stdarg.h>
+
+int
+doit()
+{
+ char buffer[32];
+ va_list args;
+ int r;
+
+ r = snprintf(buffer, 5, "1234567");
+
+ if (r != 7)
+ exit(1);
+
+ r = snprintf(buffer, 0, "1234567");
+
+ if (r != 7)
+ exit(1);
+
+ r = snprintf(NULL, 0, "1234567");
+
+ if (r != 7)
+ exit(1);
+
+ exit(0);
+}
+
+int
+main(void)
+{
+ doit();
+ exit(1);
+}], ac_cv_func_snprintf_c99=yes, ac_cv_func_snprintf_c99=no, ac_cv_func_snprintf_c99=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target has a C99 snprintf(), you can get around this
+dnl by setting ac_func_snprintf_c99 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_snprintf_c99 = yes; then
+ AC_DEFINE(HAVE_C99_SNPRINTF, 1,
+ [Define if you have a version of the snprintf function
+ with semantics as specified by the ISO C99 standard.])
+fi
+])# AC_FUNC_SNPRINTF_C99
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
+
+dnl @synopsis AC_FUNC_PRINTF_UNIX98
+dnl
+dnl Check whether the printf() family supports Unix98 %n$ positional parameters
+dnl
+AC_DEFUN([AC_FUNC_PRINTF_UNIX98],
+[AC_CACHE_CHECK(whether printf supports positional parameters,
+ ac_cv_func_printf_unix98,
+[AC_TRY_RUN(
+[#include <stdio.h>
+
+int
+main (void)
+{
+ char buffer[128];
+
+ sprintf (buffer, "%2\$d %3\$d %1\$d", 1, 2, 3);
+ if (strcmp ("2 3 1", buffer) == 0)
+ exit (0);
+ exit (1);
+}], ac_cv_func_printf_unix98=yes, ac_cv_func_printf_unix98=no, ac_cv_func_printf_unix98=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target printf() supports positional parameters, you can get around
+dnl this by setting ac_func_printf_unix98 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_printf_unix98 = yes; then
+ AC_DEFINE(HAVE_UNIX98_PRINTF, 1,
+ [Define if your printf function family supports positional parameters
+ as specified by Unix98.])
+fi
+])# AC_FUNC_PRINTF_UNIX98
+
+# Checks the location of the XML Catalog
+# Usage:
+# JH_PATH_XML_CATALOG([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+# Defines XMLCATALOG and XML_CATALOG_FILE substitutions
+AC_DEFUN([JH_PATH_XML_CATALOG],
+[
+ # check for the presence of the XML catalog
+ AC_ARG_WITH([xml-catalog],
+ AC_HELP_STRING([--with-xml-catalog=CATALOG],
+ [path to xml catalog to use]),,
+ [with_xml_catalog=/etc/xml/catalog])
+ jh_found_xmlcatalog=true
+ XML_CATALOG_FILE="$with_xml_catalog"
+ AC_SUBST([XML_CATALOG_FILE])
+ AC_MSG_CHECKING([for XML catalog ($XML_CATALOG_FILE)])
+ if test -f "$XML_CATALOG_FILE"; then
+ AC_MSG_RESULT([found])
+ else
+ jh_found_xmlcatalog=false
+ AC_MSG_RESULT([not found])
fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+
+ # check for the xmlcatalog program
+ AC_PATH_PROG(XMLCATALOG, xmlcatalog, no)
+ if test "x$XMLCATALOG" = xno; then
+ jh_found_xmlcatalog=false
+ fi
+
+ if $jh_found_xmlcatalog; then
+ ifelse([$1],,[:],[$1])
+ else
+ ifelse([$2],,[AC_MSG_ERROR([could not find XML catalog])],[$2])
fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
])
-esac
+
+# Checks if a particular URI appears in the XML catalog
+# Usage:
+# JH_CHECK_XML_CATALOG(URI, [FRIENDLY-NAME], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+AC_DEFUN([JH_CHECK_XML_CATALOG],
+[
+ AC_REQUIRE([JH_PATH_XML_CATALOG],[JH_PATH_XML_CATALOG(,[:])])dnl
+ AC_MSG_CHECKING([for ifelse([$2],,[$1],[$2]) in XML catalog])
+ if $jh_found_xmlcatalog && \
+ AC_RUN_LOG([$XMLCATALOG --noout "$XML_CATALOG_FILE" "$1" >&2]); then
+ AC_MSG_RESULT([found])
+ ifelse([$3],,,[$3
+])dnl
+ else
+ AC_MSG_RESULT([not found])
+ ifelse([$4],,
+ [AC_MSG_ERROR([could not find ifelse([$2],,[$1],[$2]) in XML catalog])],
+ [$4])
+ fi
])
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+
+# signed.m4 serial 1 (gettext-0.10.40)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([bh_C_SIGNED],
+[
+ AC_CACHE_CHECK([for signed], bh_cv_c_signed,
+ [AC_TRY_COMPILE(, [signed char x;], bh_cv_c_signed=yes, bh_cv_c_signed=no)])
+ if test $bh_cv_c_signed = no; then
+ AC_DEFINE(signed, ,
+ [Define to empty if the C compiler doesn't support this keyword.])
+ fi
])
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+
+# longlong.m4 serial 4
+dnl Copyright (C) 1999-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_LONG_LONG if 'long long' works.
+
+AC_DEFUN([jm_AC_TYPE_LONG_LONG],
+[
+ AC_CACHE_CHECK([for long long], ac_cv_type_long_long,
+ [AC_TRY_LINK([long long ll = 1LL; int i = 63;],
+ [long long llmax = (long long) -1;
+ return ll << i | ll >> i | llmax / ll | llmax % ll;],
+ ac_cv_type_long_long=yes,
+ ac_cv_type_long_long=no)])
+ if test $ac_cv_type_long_long = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1,
+ [Define if you have the 'long long' type.])
+ fi
])
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+
+# longdouble.m4 serial 1 (gettext-0.11.6)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+dnl Test whether the compiler supports the 'long double' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_LONGDOUBLE],
+[
+ AC_CACHE_CHECK([for long double], gt_cv_c_long_double,
+ [if test "$GCC" = yes; then
+ gt_cv_c_long_double=yes
+ else
+ AC_TRY_COMPILE([
+ /* The Stardent Vistra knows sizeof(long double), but does not support it. */
+ long double foo = 0.0;
+ /* On Ultrix 4.3 cc, long double is 4 and double is 8. */
+ int array [2*(sizeof(long double) >= sizeof(double)) - 1];
+ ], ,
+ gt_cv_c_long_double=yes, gt_cv_c_long_double=no)
+ fi])
+ if test $gt_cv_c_long_double = yes; then
+ AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the 'long double' type.])
+ fi
])
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AC_PROG_LD_GNU
+
+
+# wchar_t.m4 serial 1 (gettext-0.11.6)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+dnl Test whether <stddef.h> has the 'wchar_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WCHAR_T],
+[
+ AC_CACHE_CHECK([for wchar_t], gt_cv_c_wchar_t,
+ [AC_TRY_COMPILE([#include <stddef.h>
+ wchar_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wchar_t=yes, gt_cv_c_wchar_t=no)])
+ if test $gt_cv_c_wchar_t = yes; then
+ AC_DEFINE(HAVE_WCHAR_T, 1, [Define if you have the 'wchar_t' type.])
+ fi
])
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
+
+# wint_t.m4 serial 1
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+dnl Test whether <wchar.h> has the 'wint_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WINT_T],
+[
+ AC_CACHE_CHECK([for wint_t], gt_cv_c_wint_t,
+ [AC_TRY_COMPILE([#include <wchar.h>
+ wint_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wint_t=yes, gt_cv_c_wint_t=no)])
+ if test $gt_cv_c_wint_t = yes; then
+ AC_DEFINE(HAVE_WINT_T, 1, [Define if you have the 'wint_t' type.])
+ fi
])
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
+
+# intmax_t.m4 serial 1
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define intmax_t to 'long' or 'long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([jm_AC_TYPE_INTMAX_T],
+[
+ dnl For simplicity, we assume that a header file defines 'intmax_t' if and
+ dnl only if it defines 'uintmax_t'.
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
+ AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
+ test $ac_cv_type_long_long = yes \
+ && ac_type='long long' \
+ || ac_type='long'
+ AC_DEFINE_UNQUOTED(intmax_t, $ac_type,
+ [Define to long or long long if <inttypes.h> and <stdint.h> don't define.])
+ else
+ AC_DEFINE(HAVE_INTMAX_T, 1,
+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
])
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$host" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
+dnl An alternative would be to explicitly test for 'intmax_t'.
+
+AC_DEFUN([gt_AC_TYPE_INTMAX_T],
+[
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ AC_CACHE_CHECK(for intmax_t, gt_cv_c_intmax_t,
+ [AC_TRY_COMPILE([
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+], [intmax_t x = -1;], gt_cv_c_intmax_t=yes, gt_cv_c_intmax_t=no)])
+ if test $gt_cv_c_intmax_t = yes; then
+ AC_DEFINE(HAVE_INTMAX_T, 1,
+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+ else
+ AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
+ test $ac_cv_type_long_long = yes \
+ && ac_type='long long' \
+ || ac_type='long'
+ AC_DEFINE_UNQUOTED(intmax_t, $ac_type,
+ [Define to long or long long if <stdint.h> and <inttypes.h> don't define.])
+ fi
])
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+
+# stdint_h.m4 serial 3 (gettext-0.11.6)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <stdint.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_stdint_h=yes,
+ jm_ac_cv_header_stdint_h=no)])
+ if test $jm_ac_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+ [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
])
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
+
+# inttypes_h.m4 serial 5 (gettext-0.11.6)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_inttypes_h=yes,
+ jm_ac_cv_header_inttypes_h=no)])
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+ [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
fi
])
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# Modified to never use included libintl.
-# Owen Taylor <otaylor@redhat.com>, 12/15/1998
-#
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-#
-#
-# If you make changes to this file, you MUST update the copy in
-# acinclude.m4. [ aclocal dies on duplicate macros, so if
-# we run 'aclocal -I macros/' then we'll run into problems
-# once we've installed glib-gettext.m4 :-( ]
-#
-
-# serial 5
-
-AC_DEFUN(AM_GLIB_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-
- USE_INCLUDED_LIBINTL=no
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
-# AC_DEFINE(ENABLE_NLS)
-# AC_MSG_CHECKING([whether included gettext is requested])
-# AC_ARG_WITH(included-gettext,
-# [ --with-included-gettext use the GNU gettext library included here],
-# nls_cv_force_use_gnu_gettext=$withval,
-# nls_cv_force_use_gnu_gettext=no)
-# AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
- nls_cv_force_use_gnu_gettext="no"
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) dgettext ("","")],
- gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)])
-
- if test "$gt_cv_func_dgettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for dgettext in libintl],
- gt_cv_func_dgettext_libintl,
- [AC_CHECK_LIB(intl, dgettext,
- gt_cv_func_dgettext_libintl=yes,
- gt_cv_func_dgettext_libintl=no)],
- gt_cv_func_dgettext_libintl=no)])
- fi
-
- if test "$gt_cv_func_dgettext_libintl" = "yes"; then
- LIBS="$LIBS -lintl";
- fi
-
- if test "$gt_cv_func_dgettext_libc" = "yes" \
- || test "$gt_cv_func_dgettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT)
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
- fi
-
- # Added by Martin Baulig 12/15/98 for libc5 systems
- if test "$gt_cv_func_dgettext_libc" != "yes" \
- && test "$gt_cv_func_dgettext_libintl" = "yes"; then
- INTLLIBS=-lintl
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- fi
- ])
-
-# if test "$CATOBJEXT" = "NONE"; then
-# AC_MSG_CHECKING([whether catgets can be used])
-# AC_ARG_WITH(catgets,
-# [ --with-catgets use catgets functions if available],
-# nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-# AC_MSG_RESULT($nls_cv_use_catgets)
-#
-# if test "$nls_cv_use_catgets" = "yes"; then
-# dnl No gettext in C library. Try catgets next.
-# AC_CHECK_LIB(i, main)
-# AC_CHECK_FUNC(catgets,
-# [AC_DEFINE(HAVE_CATGETS)
-# INTLOBJS="\$(CATOBJS)"
-# AC_PATH_PROG(GENCAT, gencat, no)dnl
-# if test "$GENCAT" != "no"; then
-# AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-# if test "$GMSGFMT" = "no"; then
-# AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-# fi
-# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-# USE_INCLUDED_LIBINTL=yes
-# CATOBJEXT=.cat
-# INSTOBJEXT=.cat
-# DATADIRNAME=lib
-# INTLDEPS='$(top_builddir)/intl/libintl.a'
-# INTLLIBS=$INTLDEPS
-# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-# nls_cv_header_intl=intl/libintl.h
-# nls_cv_header_libgt=intl/libgettext.h
-# fi
-# ])
-# fi
-# fi
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" != "yes"; then
- AC_DEFINE(ENABLE_NLS)
- else
- dnl Unset this variable since we use the non-zero value as a flag.
- CATOBJEXT=
-# dnl Mark actions used to generate GNU NLS library.
-# INTLOBJS="\$(GETTOBJS)"
-# AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-# AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-# AC_SUBST(MSGFMT)
-# USE_INCLUDED_LIBINTL=yes
-# CATOBJEXT=.gmo
-# INSTOBJEXT=.mo
-# DATADIRNAME=share
-# INTLDEPS='$(top_builddir)/intl/libintl.a'
-# INTLLIBS=$INTLDEPS
-# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-# nls_cv_header_intl=intl/libintl.h
-# nls_cv_header_libgt=intl/libgettext.h
- fi
-
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext program is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
-
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
- AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
- AC_OUTPUT_COMMANDS(
- [case "$CONFIG_FILES" in *po/Makefile.in*)
- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
- esac])
-
-
-# # If this is used in GNU gettext we have to set USE_NLS to `yes'
-# # because some of the sources are only built for this goal.
-# if test "$PACKAGE" = gettext; then
-# USE_NLS=yes
-# USE_INCLUDED_LIBINTL=yes
-# fi
-
- dnl These rules are solely for the distribution goal. While doing this
- dnl we only have to keep exactly one list of the available catalogs
- dnl in configure.in.
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST(USE_INCLUDED_LIBINTL)
- AC_SUBST(CATALOGS)
- AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
- AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
- AC_SUBST(INTLLIBS)
- AC_SUBST(INTLOBJS)
- AC_SUBST(POFILES)
- AC_SUBST(POSUB)
- ])
-
-AC_DEFUN(AM_GLIB_GNU_GETTEXT,
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_PROG_RANLIB])dnl
-# AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next])
-
-# if test "${ac_cv_func_stpcpy+set}" != "set"; then
-# AC_CHECK_FUNCS(stpcpy)
-# fi
-# if test "${ac_cv_func_stpcpy}" = "yes"; then
-# AC_DEFINE(HAVE_STPCPY)
-# fi
-
- AM_LC_MESSAGES
- AM_GLIB_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
-# dnl The reference to <locale.h> in the installed <libintl.h> file
-# dnl must be resolved because we cannot expect the users of this
-# dnl to define HAVE_LOCALE_H.
-# if test $ac_cv_header_locale_h = yes; then
-# INCLUDE_LOCALE_H="#include <locale.h>"
-# else
-# INCLUDE_LOCALE_H="\
-#/* The system does not provide the header <locale.h>. Take care yourself. */"
-# fi
-# AC_SUBST(INCLUDE_LOCALE_H)
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- test -d po || mkdir po
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/po/$msgformat-msg.sed > po/po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/po/po2tbl.sed.in > po/po2tbl.sed
-
-# dnl In the intl/Makefile.in we have a special dependency which makes
-# dnl only sense for gettext. We comment this out for non-gettext
-# dnl packages.
-# if test "$PACKAGE" = "gettext"; then
-# GT_NO="#NO#"
-# GT_YES=
-# else
-# GT_NO=
-# GT_YES="#YES#"
-# fi
-# AC_SUBST(GT_NO)
-# AC_SUBST(GT_YES)
-
- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
- dnl Try to locate is.
- MKINSTALLDIRS=
- if test -n "$ac_aux_dir"; then
- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
- fi
- if test -z "$MKINSTALLDIRS"; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
- AC_SUBST(MKINSTALLDIRS)
-
-# dnl *** For now the libtool support in intl/Makefile is not for real.
-# l=
-# AC_SUBST(l)
-
- dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile.
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
- ])
+m4_include(acglib.m4)dnl
+m4_include(glib/libcharset/codeset.m4)dnl
+m4_include(glib/libcharset/glibc21.m4)dnl
+m4_include(m4macros/glib-gettext.m4)dnl