-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
-## Copyright (C) 1996-1999 Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$host" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-
# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
+# Ulrich Drepper <drepper@cygnus.com>, 1995, 1996
#
# Modified to never use included libintl.
# Owen Taylor <otaylor@redhat.com>, 12/15/1998
# once we've installed glib-gettext.m4 :-( ]
#
+AC_DEFUN([AM_GLIB_LC_MESSAGES],
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
+ fi
+ fi])
+
+dnl AM_GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_GLIB_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
# serial 5
AC_DEFUN(AM_GLIB_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
+ dnl NLS is obligatory
+ [USE_NLS=yes
AC_SUBST(USE_NLS)
- USE_INCLUDED_LIBINTL=no
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
-# AC_DEFINE(ENABLE_NLS)
-# AC_MSG_CHECKING([whether included gettext is requested])
-# AC_ARG_WITH(included-gettext,
-# [ --with-included-gettext use the GNU gettext library included here],
-# nls_cv_force_use_gnu_gettext=$withval,
-# nls_cv_force_use_gnu_gettext=no)
-# AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
- nls_cv_force_use_gnu_gettext="no"
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) dgettext ("","")],
- gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)])
-
- if test "$gt_cv_func_dgettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for dgettext in libintl],
- gt_cv_func_dgettext_libintl,
- [AC_CHECK_LIB(intl, dgettext,
- gt_cv_func_dgettext_libintl=yes,
- gt_cv_func_dgettext_libintl=no)],
- gt_cv_func_dgettext_libintl=no)])
- fi
-
- if test "$gt_cv_func_dgettext_libintl" = "yes"; then
- LIBS="$LIBS -lintl";
- fi
-
- if test "$gt_cv_func_dgettext_libc" = "yes" \
- || test "$gt_cv_func_dgettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT)
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
+ dnl Figure out what method
+ nls_cv_force_use_gnu_gettext="no"
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If gettext or catgets are available (in this order) we
+ dnl use this. Else we have to fall back to GNU NLS library.
+ dnl catgets is only used if permitted by option --with-catgets.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+ XGETTEXT=:
+
+ AC_CHECK_HEADER(libintl.h,
+ [AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>], [return (int) dgettext ("","")],
+ gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)])
+
+ gt_cv_func_dgettext_libintl="no"
+ libintl_extra_libs=""
+
+ if test "$gt_cv_func_dgettext_libc" != "yes" ; then
+ AC_CHECK_LIB(intl, bindtextdomain,
+ [AC_CHECK_LIB(intl, dgettext,
+ gt_cv_func_dgettext_libintl=yes)])
+
+ if test "$gt_cv_func_dgettext_libc" != "yes" ; then
+ AC_MSG_CHECKING([if -liconv is needed to use gettext])
+ AC_MSG_RESULT([])
+ AC_CHECK_LIB(intl, dcgettext,
+ [gt_cv_func_dgettext_libintl=yes
+ libintl_extra_libs=-liconv],
+ :,-liconv)
+ fi
+ fi
+
+ if test "$gt_cv_func_dgettext_libintl" = "yes"; then
+ LIBS="$LIBS -lintl $libintl_extra_libs";
+ fi
+
+ if test "$gt_cv_func_dgettext_libc" = "yes" \
+ || test "$gt_cv_func_dgettext_libintl" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT,1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AM_GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+ if test "$MSGFMT" != "no"; then
+ AC_CHECK_FUNCS(dcgettext)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr],
+ [CATOBJEXT=.gmo
+ DATADIRNAME=share],
+ [CATOBJEXT=.mo
+ DATADIRNAME=lib])
+ INSTOBJEXT=.mo
fi
-
- # Added by Martin Baulig 12/15/98 for libc5 systems
- if test "$gt_cv_func_dgettext_libc" != "yes" \
- && test "$gt_cv_func_dgettext_libintl" = "yes"; then
- INTLLIBS=-lintl
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- fi
- ])
-
-# if test "$CATOBJEXT" = "NONE"; then
-# AC_MSG_CHECKING([whether catgets can be used])
-# AC_ARG_WITH(catgets,
-# [ --with-catgets use catgets functions if available],
-# nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-# AC_MSG_RESULT($nls_cv_use_catgets)
-#
-# if test "$nls_cv_use_catgets" = "yes"; then
-# dnl No gettext in C library. Try catgets next.
-# AC_CHECK_LIB(i, main)
-# AC_CHECK_FUNC(catgets,
-# [AC_DEFINE(HAVE_CATGETS)
-# INTLOBJS="\$(CATOBJS)"
-# AC_PATH_PROG(GENCAT, gencat, no)dnl
-# if test "$GENCAT" != "no"; then
-# AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-# if test "$GMSGFMT" = "no"; then
-# AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-# fi
-# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-# USE_INCLUDED_LIBINTL=yes
-# CATOBJEXT=.cat
-# INSTOBJEXT=.cat
-# DATADIRNAME=lib
-# INTLDEPS='$(top_builddir)/intl/libintl.a'
-# INTLLIBS=$INTLDEPS
-# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-# nls_cv_header_intl=intl/libintl.h
-# nls_cv_header_libgt=intl/libgettext.h
-# fi
-# ])
-# fi
-# fi
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
+ fi
+
+ # Added by Martin Baulig 12/15/98 for libc5 systems
+ if test "$gt_cv_func_dgettext_libc" != "yes" \
+ && test "$gt_cv_func_dgettext_libintl" = "yes"; then
+ INTLLIBS="-lintl $libintl_extra_libs"
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ fi
+ ])
+
+ if test "$CATOBJEXT" = "NONE"; then
+ dnl Neither gettext nor catgets in included in the C library.
+ dnl Fall back on GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
fi
+ fi
- if test "$nls_cv_use_gnu_gettext" != "yes"; then
- AC_DEFINE(ENABLE_NLS)
+ if test "$nls_cv_use_gnu_gettext" != "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [always defined to indicate that i18n is enabled])
+ else
+ dnl Unset this variable since we use the non-zero value as a flag.
+ CATOBJEXT=
+ fi
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
else
- dnl Unset this variable since we use the non-zero value as a flag.
- CATOBJEXT=
-# dnl Mark actions used to generate GNU NLS library.
-# INTLOBJS="\$(GETTOBJS)"
-# AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-# AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-# AC_SUBST(MSGFMT)
-# USE_INCLUDED_LIBINTL=yes
-# CATOBJEXT=.gmo
-# INSTOBJEXT=.mo
-# DATADIRNAME=share
-# INTLDEPS='$(top_builddir)/intl/libintl.a'
-# INTLLIBS=$INTLDEPS
-# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-# nls_cv_header_intl=intl/libintl.h
-# nls_cv_header_libgt=intl/libgettext.h
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
fi
+ fi
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext program is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
+ # We need to process the po/ directory.
+ POSUB=po
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
- AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
AC_OUTPUT_COMMANDS(
- [case "$CONFIG_FILES" in *po/Makefile.in*)
+ [case "$CONFIG_FILES" in *po/Makefile.in*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
esac])
-
-# # If this is used in GNU gettext we have to set USE_NLS to `yes'
-# # because some of the sources are only built for this goal.
-# if test "$PACKAGE" = gettext; then
-# USE_NLS=yes
-# USE_INCLUDED_LIBINTL=yes
-# fi
-
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
done
dnl Make all variables we use known to autoconf.
- AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
-# AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
strdup __argz_count __argz_stringify __argz_next])
-# if test "${ac_cv_func_stpcpy+set}" != "set"; then
-# AC_CHECK_FUNCS(stpcpy)
-# fi
-# if test "${ac_cv_func_stpcpy}" = "yes"; then
-# AC_DEFINE(HAVE_STPCPY)
-# fi
-
- AM_LC_MESSAGES
+ AM_GLIB_LC_MESSAGES
AM_GLIB_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
fi
fi
-# dnl The reference to <locale.h> in the installed <libintl.h> file
-# dnl must be resolved because we cannot expect the users of this
-# dnl to define HAVE_LOCALE_H.
-# if test $ac_cv_header_locale_h = yes; then
-# INCLUDE_LOCALE_H="#include <locale.h>"
-# else
-# INCLUDE_LOCALE_H="\
-#/* The system does not provide the header <locale.h>. Take care yourself. */"
-# fi
-# AC_SUBST(INCLUDE_LOCALE_H)
-
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/po/$msgformat-msg.sed > po/po2msg.sed
fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/po/po2tbl.sed.in > po/po2tbl.sed
-
-# dnl In the intl/Makefile.in we have a special dependency which makes
-# dnl only sense for gettext. We comment this out for non-gettext
-# dnl packages.
-# if test "$PACKAGE" = "gettext"; then
-# GT_NO="#NO#"
-# GT_YES=
-# else
-# GT_NO=
-# GT_YES="#YES#"
-# fi
-# AC_SUBST(GT_NO)
-# AC_SUBST(GT_YES)
dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
fi
AC_SUBST(MKINSTALLDIRS)
-# dnl *** For now the libtool support in intl/Makefile is not for real.
-# l=
-# AC_SUBST(l)
-
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile.
test -d po || mkdir po
< $srcdir/po/POTFILES.in > po/POTFILES
])
+
+dnl @synopsis AC_FUNC_VSNPRINTF_C99
+dnl
+dnl Check whether there is a vsnprintf() function with C99 semantics installed.
+dnl
+AC_DEFUN([AC_FUNC_VSNPRINTF_C99],
+[AC_CACHE_CHECK(for C99 vsnprintf,
+ ac_cv_func_vsnprintf_c99,
+[AC_TRY_RUN(
+[#include <stdio.h>
+#include <stdarg.h>
+
+int
+doit(char * s, ...)
+{
+ char buffer[32];
+ va_list args;
+ int r;
+
+ va_start(args, s);
+ r = vsnprintf(buffer, 5, s, args);
+ va_end(args);
+
+ if (r != 7)
+ exit(1);
+
+ exit(0);
+}
+
+int
+main(void)
+{
+ doit("1234567");
+ exit(1);
+}], ac_cv_func_vsnprintf_c99=yes, ac_cv_func_vsnprintf_c99=no, ac_cv_func_vsnprintf_c99=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target has a C99 vsnprintf(), you can get around this
+dnl by setting ac_func_vsnprintf_c99 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_vsnprintf_c99 = yes; then
+ AC_DEFINE(HAVE_C99_VSNPRINTF, 1,
+ [Define if you have a version of the vsnprintf function
+ with semantics as specified by the ISO C99 standard.])
+fi
+])# AC_FUNC_VSNPRINTF_C99
+
+
+dnl @synopsis AC_FUNC_PRINTF_UNIX98
+dnl
+dnl Check whether the printf() family supports Unix98 %n$ positional parameters
+dnl
+AC_DEFUN([AC_FUNC_PRINTF_UNIX98],
+[AC_CACHE_CHECK(whether printf supports positional parameters,
+ ac_cv_func_printf_unix98,
+[AC_TRY_RUN(
+[#include <stdio.h>
+
+int
+main (void)
+{
+ char buffer[128];
+
+ sprintf (buffer, "%2\$d %3\$d %1\$d", 1, 2, 3);
+ if (strcmp ("2 3 1", buffer) == 0)
+ exit (0);
+ exit (1);
+}], ac_cv_func_printf_unix98=yes, ac_cv_func_printf_unix98=no, ac_cv_func_printf_unix98=no)])
+dnl Note that the default is to be pessimistic in the case of cross compilation.
+dnl If you know that the target printf() supports positional parameters, you can get around
+dnl this by setting ac_func_printf_unix98 to yes, as described in the Autoconf manual.
+if test $ac_cv_func_printf_unix98 = yes; then
+ AC_DEFINE(HAVE_UNIX98_PRINTF, 1,
+ [Define if your printf function family supports positional parameters
+ as specified by Unix98.])
+fi
+])# AC_FUNC_PRINTF_UNIX98
+
+
+
+
projects / platform / upstream / glib.git / blobdiff