[IOT-826] Android: Fixed failure on cancelObserve() with High QoS

[contrib/iotivity.git] / Readme.scons.txt

diff --git a/Readme.scons.txt b/Readme.scons.txt
index c13dd47..bc0c411 100644 (file)
--- a/Readme.scons.txt
+++ b/Readme.scons.txt
@@ -5,12 +5,12 @@
 command in this directory)
 
     Install external libraries:
-      $ sudo apt-get install libboost-dev libboost-program-options-dev libexpat1-dev libboost-thread-dev
+      $ sudo apt-get install libboost-dev libboost-program-options-dev libexpat1-dev libboost-thread-dev uuid-dev libssl-dev
 
     Build release binaries:
       $ scons
-(Note: C++ sdk requires cereal. Please follow the instruction in the build
-message to install cereal)
+(Note: C sdk requires tinycbor. Please follow the instruction in the build
+message to install tinycbor)
 
     Build debug binaries:
       $scons RELEASE=false
@@ -90,7 +90,7 @@ To build for Android, Andorid NDK and SDK are required.
 Arduino:
 To build for Arduino, Arduino IDE is required.
   Arduino IDE: http://arduino.cc/en/Main/Software
-  (Note: recommend install Arduino IDE >=1.5.7)
+  (Note: recommend install Arduino IDE >=1.5.8)
 
 Arduino builds are dependent on latest Time library. Download it from here:
     http://www.pjrc.com/teensy/td_libs_Time.html
@@ -115,6 +115,13 @@ Java codes, this isn't required)
 so you don't need to add it in command line each time. The build script will
 guide you to do that.)
 
+Tizen:
+To build for tizen platform tinycbor library is needed.
+Please download tinycbor if it is not present in extlibs/tinycbor folder
+by doing the following:
+       $ git clone https://github.com/01org/tinycbor.git extlibs/tinycbor/tinycbor
+
+
 * 3. External libraries
 IoTivity project depends on some external libraries, such as boost, expat ...
 During building, the existence of external library will be checked, if it doesn't
@@ -130,7 +137,7 @@ to skip it.
 
 1. Build IoTivity project for Linux
       $ cd <top directory of the project>
-      $ sudo apt-get install libboost-dev libexpat1-dev libboost-thread-dev
+      $ sudo apt-get install libboost-dev libexpat1-dev libboost-thread-dev libssl-dev
       $ scons
 
 2. Build IoTivity project for Android
@@ -141,40 +148,23 @@ allowed value, please execute command 'scons TARGET_OS=android -Q -h')
 
 3. Build IoTivity project for Arduino
       $ cd <top directory of the project>
-      $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy
-(xxx can be avr, arm; yyy is the name of the board, to get its allowed value
-run: scons TARGET_OS=arduino TARGET_ARCH=xxx -h. You may see a option 'CPU' in
-the output of above command line, that's due to some boards have different
-processors, to specify the processor, add 'CPU=zzz' in the command line. If no
-'CPU' option exists, that means the board only support one kind of processor,
-it's unnecessary to specify it)
+      $ sudo apt-get install dos2unix
+      $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy SHIELD=zzz
+(xxx can be avr, arm; yyy is the name of the board, zzz is the shield type, to
+get allowed values run: scons TARGET_OS=arduino TARGET_ARCH=xxx SHIELD=zzz -h.
+You may see a option 'CPU' in the output of above command line, that's due to
+some boards have different processors, to specify the processor, add 'CPU=zzz'
+in the command line. If no 'CPU' option exists, that means the board only
+support one kind of processor, it's unnecessary to specify it)
 
 4. Build Iotivity project for Tizen
       $ cd <top directory of the project>
-      $ gbs build -A xxx --packaging-dir tools/tizen/
-(xxx can be i586 or armv7l, we provide the spec file required by gbs tool at
-toools/tizen directory. gbs is default build tool for Tizen platfrom, we can
-refer the following wiki to setup Tizen development environment:
+      $ sh gbsbuild.sh
+(we provide the spec file required by gbs tool at toools/tizen directory.
+gbs is default build tool for Tizen platfrom, we can refer the following
+wiki to setup Tizen development environment:
 https://source.tizen.org/documentation/developer-guide/getting-started-guide)
 
-=== Build IoTivity project on Android ===
-
-1. Build IoTivity project for Android(It's the same as on Ubuntu)
-      $ cd <top directory of the project>
-      $ scons TARGET_OS=android TARGET_ARCH=xxx
-(xxx can be x86, armeabi, armeabi-v7a, armeabi-v7a-hard ...)
-
-2. Build IoTivity project for Arduino(It's the same as on Ubuntu)
-      $ cd <top directory of the project>
-      $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy
-(xxx can be avr, arm; yyy is the name of the board, to get its allowed value
-run: scons TARGET_OS=arduino TARGET_ARCH=xxx -h. You may see a option 'CPU' in
-the output of above command line, that's due to some boards have different
-processor, to specify the processor, add 'CPU=zzz' in the command line. If no
-'CPU' option exists, that means the board only support one kind of processor,
-it's unnecessary to specify it)
-
-
 Note: Currently most IoTivity project doesn't support Windows, so you can't set
 TARGET_OS to 'windows' except the project support Windows.
 
@@ -210,6 +200,3 @@ To build:
      $ auto_build.sh <path-to-android-ndk>
 To clean:
      $ auto_build.sh -c
-
-2) For Arduino build, the Time library should >=1.3. The old can only be built
-with Arduino IDE 1.0.x