-Curl and libcurl 7.36.0
+Curl and libcurl 7.40.1
- Public curl releases: 138
- Command line options: 161
- curl_easy_setopt() options: 206
+ Public curl releases: 144
+ Command line options: 162
+ curl_easy_setopt() options: 208
Public functions in libcurl: 58
- Known libcurl bindings: 42
- Contributors: 1123
+ Contributors: 1233
This release includes the following changes:
- o ntlm: Added support for NTLMv2 [2]
- o tool: Added support for URL specific options [3]
- o openssl: add ALPN support
- o gtls: add ALPN support
- o nss: add ALPN and NPN support
- o added CURLOPT_EXPECT_100_TIMEOUT_MS [7]
- o tool: add --no-alpn and --no-npn
- o added CURLOPT_SSL_ENABLE_NPN and CURLOPT_SSL_ENABLE_ALPN
- o winssl: enable TLSv1.1 and TLSv1.2 by default
- o winssl: TLSv1.2 disables certificate signatures using MD5 hash
- o winssl: enable hostname verification of IP address using SAN or CN [11]
- o darwinssl: Don't omit CN verification when an IP address is used [12]
- o http2: build with current nghttp2 version
- o polarssl: dropped support for PolarSSL < 1.3.0
- o openssl: info massage with SSL version used
+ o NetWare build: added TLS-SRP enabled build
+ o winbuild: Added option to build with c-ares
+ o
This release includes the following bugfixes:
- o nss: allow to use ECC ciphers if NSS implements them [1]
- o netrc: Fixed a memory leak in an OOM condition
- o ftp: fixed a memory leak on wildcard error path
- o pipeline: Fixed a NULL pointer dereference on OOM
- o nss: prefer highest available TLS version
- o 100-continue: fix timeout condition [4]
- o ssh: Fixed a NULL pointer dereference on OOM condition
- o formpost: use semicolon in multipart/mixed [5]
- o --help: add missing --tlsv1.x options
- o formdata: Fixed memory leak on OOM condition
- o ConnectionExists: reusing possible HTTP+NTLM connections better [6]
- o mingw32: fix compilation
- o chunked decoder: track overflows correctly [8]
- o curl_easy_setopt.3: add CURL_HTTP_VERSION_2_0
- o dict: fix memory leak in OOM exit path
- o valgrind: added suppression on optimized code
- o curl: output protocol headers using binary mode
- o tool: Added URL index to password prompt for multiple operations
- o ConnectionExists: re-use non-NTLM connections better [9]
- o axtls: call ssl_read repeatedly
- o multi: make MAXCONNECTS default 4 x number of easy handles function
- o configure: Fix the --disable-crypto-auth option
- o multi: ignore SIGPIPE internally
- o curl.1: update the description of --tlsv1
- o SFTP: skip reading the dir when NOBODY=1 [10]
- o easy: Fixed a memory leak on OOM condition
- o tool: Fixed incorrect return code when setting HTTP request fails
- o configure: Tiny fix to honor POSIX
- o tool: Do not output libcurl source for the information only parameters
- o Rework Open Watcom make files to use standard Wmake features
- o x509asn: moved out Curl_verifyhost from NSS builds
- o configure: call it GSS-API
- o hostcheck: Curl_cert_hostcheck is not used by NSS builds
- o multi_runsingle: move timestamp into INIT [13]
- o remote_port: allow connect to port 0
- o parse_remote_port: error out on illegal port numbers better
- o ssh: Pass errors from libssh2_sftp_read up the stack
- o docs: remove documentation on setting up krb4 support
- o polarssl: build fixes to work with PolarSSL 1.3.x
- o polarssl: fix possible handshake timeout issue in multi
- o nss: allow to enable/disable cipher-suites better
- o ssh: prevent a logic error that could result in an infinite loop
- o http2: free resources on disconnect
+ o sasl_gssapi: Fixed build on NetBSD with built-in GSS-API [1]
+ o FTP: fix IPv6 host using link-local address [2]
+ o FTP: if EPSV fails on IPV6 connections, bail out
+ o gssapi: Remove need for duplicated GSS_C_NT_HOSTBASED_SERVICE definitions
+ o NSS: fix compiler error when built http2-enabled
+ o mingw build: allow to pass custom CFLAGS [3]
+ o add -m64 CFLAGS when targeting mingw64, add -m32/-m64 to LDFLAGS [4]
+ o curl_schannel.c: mark session as removed from cache if not freed [5]
+ o Curl_pretransfer: reset expected transfer sizes [6]
+ o curl.h: remove extra space [7]
+ o curl_endian: Fixed build when 64-bit integers are not supported [8]
+ o checksrc.bat: Better detection of Perl installation
+ o build-openssl.bat: Added check for Perl installation
+ o
This release includes the following known bugs:
This release would not have looked like this without help, code, reports and
advice from friends like these:
- Adam Sampson, Arvid Norberg, Brad Spencer, Colin Hogben, Dan Fandrich,
- Daniel Stenberg, David Ryskalczyk, Fabian Frank, Gaël PORTAY, Gisle Vanem,
- Hubert Kario, Jeff King, Jiri Malak, Kamil Dudka, Maks Naumov, Marc Hoersken,
- Michael Osipov, Nick Zitzmann, Patrick Monnerat, Prash Dush, Remi Gacogne,
- Rob Davies, Romulo A. Ceccon, Shao Shuchao, Steve Holme, Tatsuhiro Tsujikawa,
- Thomas Braun, Tiit Pikma, Yehezkel Horowitz,
+ Daniel Stenberg, Guenter Knauf, Jean-Francois Durand, John E. Malmberg,
+ Marc Hoersken, Mohammad AlSaleh, Sam Schanken, Steve Holme, Thomas Klausner,
+ Viktor Szakats, Vojtěch Král, Yun SangHo
Thanks! (and sorry if I forgot to mention someone)
References to bug reports and discussions on issues:
- [1] = https://bugzilla.redhat.com/1058776
- [2] = http://curl.haxx.se/mail/lib-2014-01/0183.html
- [3] = http://curl.haxx.se/mail/archive-2013-11/0006.html
- [4] = http://curl.haxx.se/bug/view.cgi?id=1334
- [5] = http://curl.haxx.se/bug/view.cgi?id=1333
- [6] = http://curl.haxx.se/mail/lib-2014-02/0100.html
- [7] = http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTEXPECT100TIMEOUTMS
- [8] = http://curl.haxx.se/mail/lib-2014-02/0097.html
- [9] = http://thread.gmane.org/gmane.comp.version-control.git/242213
- [10] = http://curl.haxx.se/mail/lib-2014-02/0155.html
- [11] = http://curl.haxx.se/mail/lib-2014-02/0243.html
- [12] = https://github.com/bagder/curl/pull/93
- [13] = http://curl.haxx.se/mail/lib-2014-02/0036.html
+ [1] = http://curl.haxx.se/bug/view.cgi?id=1469
+ [2] = http://curl.haxx.se/bug/view.cgi?id=1468
+ [3] = https://github.com/bagder/curl/pull/136
+ [4] = https://github.com/bagder/curl/pull/134
+ [5] = http://curl.haxx.se/mail/lib-2015-01/0036.html
+ [6] = http://curl.haxx.se/mail/lib-2015-01/0065.html
+ [7] = https://github.com/bagder/curl/pull/137
+ [8] = http://curl.haxx.se/mail/lib-2015-01/0094.html
+ [9] =
projects / platform / upstream / curl.git / blobdiff