Merge tag 'for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-i2c

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 6bdfca6..ff0df37 100644 (file)
--- a/README
+++ b/README
@@ -371,10 +371,6 @@ The following options need to be configured:
                In this mode, a single differential clock is used to supply
                clocks to the sysclock, ddrclock and usbclock.
 
-               CONFIG_SYS_CPC_REINIT_F
-               This CONFIG is defined when the CPC is configured as SRAM at the
-               time of U-Boot entry and is required to be re-initialized.
-
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -850,13 +846,6 @@ The following options need to be configured:
                the appropriate value in Hz.
 
 - MMC Support:
-               The MMC controller on the Intel PXA is supported. To
-               enable this define CONFIG_MMC. The MMC can be
-               accessed from the boot prompt by mapping the device
-               to physical memory similar to flash. Command line is
-               enabled with CONFIG_CMD_MMC. The MMC driver also works with
-               the FAT fs. This is enabled with CONFIG_CMD_FAT.
-
                CONFIG_SH_MMCIF
                Support for Renesas on-chip MMCIF controller
 
@@ -1747,12 +1736,6 @@ Configuration Settings:
 
                Non-cached memory is only supported on 32-bit ARM at present.
 
-- CONFIG_SYS_BOOTM_LEN:
-               Normally compressed uImages are limited to an
-               uncompressed size of 8 MBytes. If this is not enough,
-               you can define CONFIG_SYS_BOOTM_LEN in your board config file
-               to adjust this setting to your needs.
-
 - CONFIG_SYS_BOOTMAPSZ:
                Maximum size of memory mapped by the startup code of
                the Linux kernel; all data that must be processed by
@@ -1765,11 +1748,6 @@ Configuration Settings:
                CONFIG_SYS_BOOTMAPSZ.  If CONFIG_SYS_BOOTMAPSZ is undefined,
                then the value in "bootm_size" will be used instead.
 
-- CONFIG_SYS_BOOT_RAMDISK_HIGH:
-               Enable initrd_high functionality.  If defined then the
-               initrd_high feature is enabled and the bootm ramdisk subcommand
-               is enabled.
-
 - CONFIG_SYS_BOOT_GET_CMDLINE:
                Enables allocating and saving kernel cmdline in space between
                "bootm_low" and "bootm_low" + BOOTMAPSZ.
@@ -2074,10 +2052,6 @@ Low Level (hardware related) configuration options:
 - CONFIG_FSL_DDR_BIST
                Enable built-in memory test for Freescale DDR controllers.
 
-- CONFIG_SYS_83XX_DDR_USES_CS0
-               Only for 83xx systems. If specified, then DDR should
-               be configured using CS0 and CS1 instead of CS2 and CS3.
-
 - CONFIG_RMII
                Enable RMII mode for all FECs.
                Note that this is a global option, we can't