CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
CONFIG_CMD_ASKENV * ask for env variable
CONFIG_CMD_BDI bdinfo
- CONFIG_CMD_BEDBUG * Include BedBug Debugger
- CONFIG_CMD_BMP * BMP support
- CONFIG_CMD_BSP * Board specific commands
CONFIG_CMD_BOOTD bootd
CONFIG_CMD_BOOTI * ARM64 Linux kernel Image support
CONFIG_CMD_CACHE * icache, dcache
- CONFIG_CMD_CLK * clock command support
CONFIG_CMD_CONSOLE coninfo
CONFIG_CMD_CRC32 * crc32
- CONFIG_CMD_DATE * support for RTC, date/time...
CONFIG_CMD_DHCP * DHCP support
CONFIG_CMD_DIAG * Diagnostics
CONFIG_CMD_DS4510 * ds4510 I2C gpio commands
tree is available in the global data as gd->fdt_blob.
U-Boot needs to get its device tree from somewhere. This can
- be done using one of the two options below:
+ be done using one of the three options below:
CONFIG_OF_EMBED
If this variable is defined, U-Boot will embed a device tree
still use the individual files if you need something more
exotic.
+ CONFIG_OF_BOARD
+ If this variable is defined, U-Boot will use the device tree
+ provided by the board at runtime instead of embedding one with
+ the image. Only boards defining board_fdt_blob_setup() support
+ this option (see include/fdtdec.h file).
+
- Watchdog:
CONFIG_WATCHDOG
If this variable is defined, it enables watchdog
This will also enable the command "fatwrite" enabling the
user to write files to FAT.
-- CBFS (Coreboot Filesystem) support:
- CONFIG_CMD_CBFS
-
- Define this to enable support for reading from a Coreboot
- filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
- and cbfsload.
-
- FAT(File Allocation Table) filesystem cluster size:
CONFIG_FS_FAT_MAX_CLUSTSIZE
CONFIG_SYS_DIU_ADDR
CONFIG_VIDEO
- CONFIG_CMD_BMP
CONFIG_CFB_CONSOLE
CONFIG_VIDEO_SW_CURSOR
CONFIG_VGA_AS_SINGLE_DEVICE
320x240. Black & white.
- Normally display is black on white background; define
- CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
-
CONFIG_LCD_ALIGNMENT
Normally the LCD is page-aligned (typically 4KB). If this is
This enables 'hdmidet' command which returns true if an
HDMI monitor is detected. This command is i.MX 6 specific.
- CONFIG_CMD_BMODE
- This enables the 'bmode' (bootmode) command for forcing
- a boot from specific media.
-
- This is useful for forcing the ROM's usb downloader to
- activate upon a watchdog reset which is nice when iterating
- on U-Boot. Using the reset button or running bmode normal
- will set it back to normal. This command currently
- supports i.MX53 and i.MX6.
-
- bootcount support:
CONFIG_BOOTCOUNT_LIMIT
If defined, don't allow the -f switch to env set override variable
access flags.
-- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
- This is set by OMAP boards for the max time that reset should
- be asserted. See doc/README.omap-reset-time for details on how
- the value can be calculated on a given board.
-
- CONFIG_USE_STDINT
If stdint.h is available with your toolchain you can define this
option to enable it. You can provide option 'USE_STDINT=1' when
If defined, the x86 reset vector code is included. This is not
needed when U-Boot is running from Coreboot.
-- CONFIG_SYS_MPUCLK
- Defines the MPU clock speed (in MHz).
-
- NOTE : currently only supported on AM335x platforms.
-
- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
Enables the RTC32K OSC on AM33xx based plattforms