vbe: Drop the U-Boot prefix from the version

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 186f1f9..ec1b50c 100644 (file)
--- a/README
+++ b/README
@@ -770,80 +770,6 @@ The following options need to be configured:
 - Keyboard Support:
                See Kconfig help for available keyboard drivers.
 
-- LCD Support: CONFIG_LCD
-
-               Define this to enable LCD support (for output to LCD
-               display); also select one of the supported displays
-               by defining one of these:
-
-               CONFIG_NEC_NL6448AC33:
-
-                       NEC NL6448AC33-18. Active, color, single scan.
-
-               CONFIG_NEC_NL6448BC20
-
-                       NEC NL6448BC20-08. 6.5", 640x480.
-                       Active, color, single scan.
-
-               CONFIG_NEC_NL6448BC33_54
-
-                       NEC NL6448BC33-54. 10.4", 640x480.
-                       Active, color, single scan.
-
-               CONFIG_SHARP_16x9
-
-                       Sharp 320x240. Active, color, single scan.
-                       It isn't 16x9, and I am not sure what it is.
-
-               CONFIG_SHARP_LQ64D341
-
-                       Sharp LQ64D341 display, 640x480.
-                       Active, color, single scan.
-
-               CONFIG_HLD1045
-
-                       HLD1045 display, 640x480.
-                       Active, color, single scan.
-
-               CONFIG_OPTREX_BW
-
-                       Optrex   CBL50840-2 NF-FW 99 22 M5
-                       or
-                       Hitachi  LMG6912RPFC-00T
-                       or
-                       Hitachi  SP14Q002
-
-                       320x240. Black & white.
-
-               CONFIG_LCD_ALIGNMENT
-
-               Normally the LCD is page-aligned (typically 4KB). If this is
-               defined then the LCD will be aligned to this value instead.
-               For ARM it is sometimes useful to use MMU_SECTION_SIZE
-               here, since it is cheaper to change data cache settings on
-               a per-section basis.
-
-
-               CONFIG_LCD_ROTATION
-
-               Sometimes, for example if the display is mounted in portrait
-               mode or even if it's mounted landscape but rotated by 180degree,
-               we need to rotate our content of the display relative to the
-               framebuffer, so that user can read the messages which are
-               printed out.
-               Once CONFIG_LCD_ROTATION is defined, the lcd_console will be
-               initialized with a given rotation from "vl_rot" out of
-               "vidinfo_t" which is provided by the board specific code.
-               The value for vl_rot is coded as following (matching to
-               fbcon=rotate:<n> linux-kernel commandline):
-               0 = no rotation respectively 0 degree
-               1 = 90 degree rotation
-               2 = 180 degree rotation
-               3 = 270 degree rotation
-
-               If CONFIG_LCD_ROTATION is not defined, the console will be
-               initialized with 0degree rotation.
-
 - MII/PHY support:
                CONFIG_PHY_CLOCK_FREQ (ppc4xx)