CONFIG_ARM7
CONFIG_PXA250
+ MicroBlaze based CPUs:
+ ----------------------
+ CONFIG_MICROBLZE
+
- Board Type: Define exactly one of
CONFIG_RPXlite, CONFIG_RPXsuper, CONFIG_rsdproto,
CONFIG_sacsng, CONFIG_Sandpoint8240, CONFIG_Sandpoint8245,
CONFIG_sbc8260, CONFIG_SM850, CONFIG_SPD823TS,
- CONFIG_SXNI855T, CONFIG_TQM823L, CONFIG_TQM8260,
- CONFIG_TQM850L, CONFIG_TQM855L, CONFIG_TQM860L,
- CONFIG_TTTech, CONFIG_UTX8245, CONFIG_V37,
- CONFIG_W7OLMC, CONFIG_W7OLMG, CONFIG_WALNUT405,
- CONFIG_ZPC1900, CONFIG_ZUMA,
+ CONFIG_STXGP3, CONFIG_SXNI855T, CONFIG_TQM823L,
+ CONFIG_TQM8260, CONFIG_TQM850L, CONFIG_TQM855L,
+ CONFIG_TQM860L, CONFIG_TTTech, CONFIG_UTX8245,
+ CONFIG_V37, CONFIG_W7OLMC, CONFIG_W7OLMG,
+ CONFIG_WALNUT405, CONFIG_ZPC1900, CONFIG_ZUMA,
ARM based boards:
-----------------
CONFIG_LUBBOCK, CONFIG_SHANNON, CONFIG_SMDK2400,
CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9,
+ MicroBlaze based boards:
+ ------------------------
+
+ CONFIG_SUZAKU
+
- CPU Module Type: (if CONFIG_COGENT is defined)
Define exactly one of
selected via environment 'videomode'. Two diferent ways
are possible:
- "videomode=num" 'num' is a standard LiLo mode numbers.
- Following standard modes are supported (* is default):
+ Following standard modes are supported (* is default):
Colors 640x480 800x600 1024x768 1152x864 1280x1024
-------------+---------------------------------------------
the DHCP server.
- CDP Options:
- CONFIG_CDP_DEVICE_ID
+ CONFIG_CDP_DEVICE_ID
The device id used in CDP trigger frames.
- CONFIG_FEC[12]_PHY
Define to the hardcoded PHY address which corresponds
- to the given FEC.
-
- i.e.
- #define CONFIG_FEC1_PHY 4
+ to the given FEC; i. e.
+ #define CONFIG_FEC1_PHY 4
means that the PHY with address 4 is connected to FEC1
When set to -1, means to probe for first available.
QS850_config QS860T_config RPXlite_config
RPXsuper_config rsdproto_config Sandpoint8240_config
sbc8260_config SM850_config SPD823TS_config
- SXNI855T_config TQM823L_config TQM850L_config
- TQM855L_config TQM860L_config WALNUT405_config
- ZPC1900_config
+ stxgp3_config SXNI855T_config TQM823L_config
+ TQM850L_config TQM855L_config TQM860L_config
+ WALNUT405_config ZPC1900_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
netretry - When set to "no" each network operation will
either succeed or fail without retrying.
+ When set to "once" the network operation will
+ fail when all the available network interfaces
+ are tried once without success.
Useful on scripts which control the retry operation
themselves.