example, some LED's) on your board. At the moment,
the following checkpoints are implemented:
-- Detailed boot stage timing
- CONFIG_BOOTSTAGE
- Define this option to get detailed timing of each stage
- of the boot process.
-
- CONFIG_BOOTSTAGE_USER_COUNT
- This is the number of available user bootstage records.
- Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
- a new ID will be allocated from this stash. If you exceed
- the limit, recording will stop.
-
- CONFIG_BOOTSTAGE_REPORT
- Define this to print a report before boot, similar to this:
-
- Timer summary in microseconds:
- Mark Elapsed Stage
- 0 0 reset
- 3,575,678 3,575,678 board_init_f start
- 3,575,695 17 arch_cpu_init A9
- 3,575,777 82 arch_cpu_init done
- 3,659,598 83,821 board_init_r start
- 3,910,375 250,777 main_loop
- 29,916,167 26,005,792 bootm_start
- 30,361,327 445,160 start_kernel
-
- CONFIG_CMD_BOOTSTAGE
- Add a 'bootstage' command which supports printing a report
- and un/stashing of bootstage data.
-
- CONFIG_BOOTSTAGE_FDT
- Stash the bootstage information in the FDT. A root 'bootstage'
- node is created with each bootstage id as a child. Each child
- has a 'name' property and either 'mark' containing the
- mark time in microsecond, or 'accum' containing the
- accumulated time for that bootstage id in microseconds.
- For example:
-
- bootstage {
- 154 {
- name = "board_init_f";
- mark = <3575678>;
- };
- 170 {
- name = "lcd";
- accum = <33482>;
- };
- };
-
- Code in the Linux kernel can find this in /proc/devicetree.
Legacy uImage format:
65 net/eth.c Ethernet found.
-80 common/cmd_net.c usage wrong
- 80 common/cmd_net.c before calling NetLoop()
- -81 common/cmd_net.c some error in NetLoop() occurred
- 81 common/cmd_net.c NetLoop() back without error
+ 80 common/cmd_net.c before calling net_loop()
+ -81 common/cmd_net.c some error in net_loop() occurred
+ 81 common/cmd_net.c net_loop() back without error
-82 common/cmd_net.c size == 0 (File with size 0 loaded)
82 common/cmd_net.c trying automatic boot
83 common/cmd_net.c running "source" command
Adds the MTD partitioning infrastructure from the Linux
kernel. Needed for UBI support.
- CONFIG_MTD_NAND_VERIFY_WRITE
- verify if the written data is correct reread.
-
- UBI support
CONFIG_CMD_UBI
CONFIG_SPL_STACK
Adress of the start of the stack SPL will use
+ CONFIG_SPL_PANIC_ON_RAW_IMAGE
+ When defined, SPL will panic() if the image it has
+ loaded does not have a signature.
+ Defining this is useful when code which loads images
+ in SPL cannot guarantee that absolutely all read errors
+ will be caught.
+ An example is the LPC32XX MLC NAND driver, which will
+ consider that a completely unreadable NAND block is bad,
+ and thus should be skipped silently.
+
CONFIG_SPL_RELOC_STACK
Adress of the start of the stack SPL will use after
relocation. If unspecified, this is equal to