arm: rmobile: koelsch: Change to maximum CPU frequency

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 39e05d3..c9990e6 100644 (file)
--- a/README
+++ b/README
@@ -3254,6 +3254,10 @@ FIT uImage format:
                supports MMC, NAND and YMODEM loading of U-Boot and NAND
                NAND loading of the Linux Kernel.
 
+               CONFIG_SPL_OS_BOOT
+               Enable booting directly to an OS from SPL.
+               See also: doc/README.falcon
+
                CONFIG_SPL_DISPLAY_PRINT
                For ARM, enable an optional function to print more information
                about the running system.
@@ -3326,6 +3330,10 @@ FIT uImage format:
                Support for NAND boot using simple NAND drivers that
                expose the cmd_ctrl() interface.
 
+               CONFIG_SPL_MTD_SUPPORT
+               Support for the MTD subsystem within SPL.  Useful for
+               environment on NAND support within SPL.
+
                CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
                Set for the SPL on PPC mpc8xxx targets, support for
                drivers/ddr/fsl/libddr.o in SPL binary.
@@ -4488,6 +4496,11 @@ Low Level (hardware related) configuration options:
 - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
                Enables the RTC32K OSC on AM33xx based plattforms
 
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+               Option to disable subpage write in NAND driver
+               driver that uses this:
+               drivers/mtd/nand/davinci_nand.c
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------