Convert CONFIG_FSL_ESDHC_PIN_MUX to Kconfig

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 0acc0b4..b833aca 100644 (file)
--- a/README
+++ b/README
@@ -629,13 +629,6 @@ The following options need to be configured:
                variable usbtty to be cdc_acm should suffice. The following
                might be defined in YourBoardName.h
 
-                       CONFIG_USB_DEVICE
-                       Define this to build a UDC device
-
-                       CONFIG_USB_TTY
-                       Define this to have a tty type of device available to
-                       talk to the UDC device
-
                        CONFIG_USBD_HS
                        Define this to enable the high speed support for usb
                        device and usbtty. If this feature is enabled, a routine
@@ -1484,24 +1477,6 @@ Configuration Settings:
 - CONFIG_SYS_FLASH_USE_BUFFER_WRITE
                Use buffered writes to flash.
 
-- CONFIG_FLASH_SPANSION_S29WS_N
-               s29ws-n MirrorBit flash has non-standard addresses for buffered
-               write commands.
-
-- CONFIG_FLASH_SHOW_PROGRESS
-               If defined (must be an integer), print out countdown
-               digits and dots.  Recommended value: 45 (9..1) for 80
-               column displays, 15 (3..1) for 40 column displays.
-
-- CONFIG_FLASH_VERIFY
-               If defined, the content of the flash (destination) is compared
-               against the source after the write operation. An error message
-               will be printed when the contents are not identical.
-               Please note that this option is useless in nearly all cases,
-               since such flash programming errors usually are detected earlier
-               while unprotecting/erasing/programming. Please only enable
-               this option if you really know what you are doing.
-
 - CONFIG_ENV_FLAGS_LIST_DEFAULT
 - CONFIG_ENV_FLAGS_LIST_STATIC
        Enable validation of the values given to environment variables when
@@ -1549,11 +1524,6 @@ The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
 
-- CONFIG_BUILD_ENVCRC:
-
-       Builds up envcrc with the target environment so that external utils
-       may easily extract it and embed it in final U-Boot images.
-
 BE CAREFUL! The first access to the environment happens quite early
 in U-Boot initialization (when we try to get the setting of for the
 console baudrate). You *MUST* have mapped your NVRAM area then, or