scripts: Fix to not skip some option parameters for rpi4 fusing script

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index ebfdced..98185af 100644 (file)
--- a/README
+++ b/README
@@ -294,17 +294,6 @@ The following options need to be configured:
                the "64" category of the Power ISA). This is necessary for ePAPR
                compliance, among other possible reasons.
 
-               CONFIG_SYS_FSL_TBCLK_DIV
-
-               Defines the core time base clock divider ratio compared to the
-               system clock.  On most PQ3 devices this is 8, on newer QorIQ
-               devices it can be 16 or 32.  The ratio varies from SoC to Soc.
-
-               CONFIG_SYS_FSL_PCIE_COMPAT
-
-               Defines the string to utilize when trying to match PCIe device
-               tree nodes for the given platform.
-
                CONFIG_SYS_FSL_ERRATUM_A004510
 
                Enables a workaround for erratum A004510.  If set,
@@ -330,31 +319,12 @@ The following options need to be configured:
                This is the value to write into CCSR offset 0x18600
                according to the A004510 workaround.
 
-               CONFIG_SYS_FSL_DSP_DDR_ADDR
-               This value denotes start offset of DDR memory which is
-               connected exclusively to the DSP cores.
-
-               CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
-               This value denotes start offset of M2 memory
-               which is directly connected to the DSP core.
-
-               CONFIG_SYS_FSL_DSP_M3_RAM_ADDR
-               This value denotes start offset of M3 memory which is directly
-               connected to the DSP core.
-
-               CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
-               This value denotes start offset of DSP CCSR space.
-
                CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
                Single Source Clock is clocking mode present in some of FSL SoC's.
                In this mode, a single differential clock is used to supply
                clocks to the sysclock, ddrclock and usbclock.
 
 - Generic CPU options:
-               CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
-
-               Defines the endianess of the CPU. Implementation of those
-               values is arch specific.
 
                CONFIG_SYS_FSL_DDR
                Freescale DDR driver in use. This type of DDR controller is
@@ -595,20 +565,6 @@ The following options need to be configured:
                        CONFIG_LAN91C96_USE_32_BIT
                        Define this to enable 32 bit addressing
 
-               CONFIG_SMC91111
-               Support for SMSC's LAN91C111 chip
-
-                       CONFIG_SMC91111_BASE
-                       Define this to hold the physical address
-                       of the device (I/O space)
-
-                       CONFIG_SMC_USE_32_BIT
-                       Define this if data bus is 32 bits
-
-                       CONFIG_SMC_USE_IOFUNCS
-                       Define this to use i/o functions instead of macros
-                       (some hardware wont work with macros)
-
                        CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
                        Define this if you have more then 3 PHYs.