Convert CONFIG_ATMEL_LCD et al to Kconfig

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index c704d0a..805c8f0 100644 (file)
--- a/README
+++ b/README
@@ -994,10 +994,6 @@ The following options need to be configured:
                display); also select one of the supported displays
                by defining one of these:
 
-               CONFIG_ATMEL_LCD:
-
-                       HITACHI TX09D70VM1CCA, 3.5", 240x320.
-
                CONFIG_NEC_NL6448AC33:
 
                        NEC NL6448AC33-18. Active, color, single scan.
@@ -1075,13 +1071,6 @@ The following options need to be configured:
 
                The clock frequency of the MII bus
 
-               CONFIG_PHY_RESET_DELAY
-
-               Some PHY like Intel LXT971A need extra delay after
-               reset before any MII register access is possible.
-               For such PHY, set this option to the usec delay
-               required. (minimum 300usec for LXT971A)
-
                CONFIG_PHY_CMD_DELAY (ppc4xx)
 
                Some PHY like Intel LXT971A need extra delay after
@@ -2109,14 +2098,6 @@ Configuration Settings:
                while unprotecting/erasing/programming. Please only enable
                this option if you really know what you are doing.
 
-- CONFIG_SYS_RX_ETH_BUFFER:
-               Defines the number of Ethernet receive buffers. On some
-               Ethernet controllers it is recommended to set this value
-               to 8 or even higher (EEPRO100 or 405 EMAC), since all
-               buffers can be full shortly after enabling the interface
-               on high Ethernet traffic.
-               Defaults to 4 if not defined.
-
 - CONFIG_ENV_MAX_ENTRIES
 
        Maximum number of entries in the hash table that is used