the LCD display every second with
a "rotator" |\-/|\-/
-- Board flavour: (if CONFIG_MPC8260ADS is defined)
- CONFIG_ADSTYPE
- Possible values are:
- CONFIG_SYS_8260ADS - original MPC8260ADS
- CONFIG_SYS_8266ADS - MPC8266ADS
- CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR
- CONFIG_SYS_8272ADS - MPC8272ADS
-
- Marvell Family Member
CONFIG_SYS_MVFS - define it if you want to enable
multiple fs option at one time
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
- CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
- interval for usb hub power-on delay.(minimum 100msec)
-
- USB Device:
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
+ CONFIG_GENERIC_MMC
+ Enable the generic MMC driver
+
+ CONFIG_SUPPORT_EMMC_BOOT
+ Enable some additional features of the eMMC boot partitions.
+
+ CONFIG_SUPPORT_EMMC_RPMB
+ Enable the commands for reading, writing and programming the
+ key for the Replay Protection Memory Block partition in eMMC.
+
- USB Device Firmware Update (DFU) class support:
CONFIG_DFU_FUNCTION
This enables the USB portion of the DFU USB class
filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
and cbfsload.
+- FAT(File Allocation Table) filesystem cluster size:
+ CONFIG_FS_FAT_MAX_CLUSTSIZE
+
+ Define the max cluster size for fat operations else
+ a default value of 65536 will be defined.
+
- Keyboard Support:
CONFIG_ISA_KEYBOARD
Specify the number of FPGA devices to support.
+ CONFIG_CMD_FPGA_LOADMK
+
+ Enable support for fpga loadmk command
+
+ CONFIG_CMD_FPGA_LOADP
+
+ Enable support for fpga loadp command - load partial bitstream
+
+ CONFIG_CMD_FPGA_LOADBP
+
+ Enable support for fpga loadbp command - load partial bitstream
+ (Xilinx only)
+
CONFIG_SYS_FPGA_PROG_FEEDBACK
Enable printing of hash marks during FPGA configuration.
-150 common/cmd_nand.c Incorrect FIT image format
151 common/cmd_nand.c FIT image format OK
+- legacy image format:
+ CONFIG_IMAGE_FORMAT_LEGACY
+ enables the legacy image format support in U-Boot.
+
+ Default:
+ enabled if CONFIG_FIT_SIGNATURE is not defined.
+
+ CONFIG_DISABLE_IMAGE_LEGACY
+ disable the legacy image format
+
+ This define is introduced, as the legacy image format is
+ enabled per default for backward compatibility.
+
- FIT image support:
CONFIG_FIT
Enable support for the FIT uImage format.
using a hash signed and verified using RSA. See
doc/uImage.FIT/signature.txt for more details.
+ WARNING: When relying on signed FIT images with required
+ signature check the legacy image format is default
+ disabled. If a board need legacy image format support
+ enable this through CONFIG_IMAGE_FORMAT_LEGACY
+
- Standalone program support:
CONFIG_STANDALONE_LOAD_ADDR