sparc: Correct arch/sparc/cpu/leon3/start.S from SPDX conversion

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 9c6d058..5def773 100644 (file)
--- a/README
+++ b/README
@@ -1963,6 +1963,21 @@ CBFS (Coreboot Filesystem) support
                kernel). Defining CONFIG_STATUS_LED enables this
                feature in U-Boot.
 
+               Additional options:
+
+               CONFIG_GPIO_LED
+               The status LED can be connected to a GPIO pin.
+               In such cases, the gpio_led driver can be used as a
+               status LED backend implementation. Define CONFIG_GPIO_LED
+               to include the gpio_led driver in the U-Boot binary.
+
+               CONFIG_GPIO_LED_INVERTED_TABLE
+               Some GPIO connected LEDs may have inverted polarity in which
+               case the GPIO high value corresponds to LED off state and
+               GPIO low value corresponds to LED on state.
+               In such cases CONFIG_GPIO_LED_INVERTED_TABLE may be defined
+               with a list of GPIO LEDs that have inverted polarity.
+
 - CAN Support: CONFIG_CAN_DRIVER
 
                Defining CONFIG_CAN_DRIVER enables CAN driver support
@@ -2058,6 +2073,24 @@ CBFS (Coreboot Filesystem) support
                  - CONFIG_SYS_I2C_SH_SPEED5 for for the speed channel 5
                  - CONFIF_SYS_I2C_SH_NUM_CONTROLLERS for nummber of i2c buses
 
+               - drivers/i2c/omap24xx_i2c.c
+                 - activate this driver with CONFIG_SYS_I2C_OMAP24XX
+                 - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0
+                 - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0
+                 - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1
+                 - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1
+                 - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2
+                 - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2
+                 - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3
+                 - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3
+                 - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4
+                 - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4
+
+               - drivers/i2c/zynq_i2c.c
+                 - activate this driver with CONFIG_SYS_I2C_ZYNQ
+                 - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting
+                 - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr
+
                additional defines:
 
                CONFIG_SYS_NUM_I2C_BUSES