drivers: musb_gadget: Save endpoint desc to usb_ep->desc

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index fa56061..5549849 100644 (file)
--- a/README
+++ b/README
@@ -639,20 +639,6 @@ The following options need to be configured:
                example "env grep" and "setexpr".
 
 - Watchdog:
-               CONFIG_WATCHDOG
-               If this variable is defined, it enables watchdog
-               support for the SoC. There must be support in the SoC
-               specific code for a watchdog. For the 8xx
-               CPUs, the SIU Watchdog feature is enabled in the SYPCR
-               register.  When supported for a specific SoC is
-               available, then no further board specific code should
-               be needed to use it.
-
-               CONFIG_HW_WATCHDOG
-               When using a watchdog circuitry external to the used
-               SoC, then define this variable and provide board
-               specific code for the "hw_watchdog_reset" function.
-
                CONFIG_SYS_WATCHDOG_FREQ
                Some platforms automatically call WATCHDOG_RESET()
                from the timer interrupt handler every
@@ -1013,9 +999,6 @@ The following options need to be configured:
                sending again an USB request to the device.
 
 - Journaling Flash filesystem support:
-               CONFIG_JFFS2_NAND
-               Define these for a default partition on a NAND device
-
                CONFIG_SYS_JFFS2_FIRST_SECTOR,
                CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS
                Define these for a default partition on a NOR device
@@ -1034,7 +1017,6 @@ The following options need to be configured:
                        CONFIG_CFB_CONSOLE
                        CONFIG_VIDEO_SW_CURSOR
                        CONFIG_VGA_AS_SINGLE_DEVICE
-                       CONFIG_VIDEO_LOGO
                        CONFIG_VIDEO_BMP_LOGO
 
                The DIU driver will look for the 'video-mode' environment
@@ -2930,8 +2912,7 @@ details; basically, the header defines the following image properties:
 * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
   LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
-  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
-  INTEGRITY).
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY).
 * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
   IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
   Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).