drivers: mmc: write protect single boot area

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index ed8e807..2c4bde0 100644 (file)
--- a/README
+++ b/README
@@ -371,10 +371,6 @@ The following options need to be configured:
                In this mode, a single differential clock is used to supply
                clocks to the sysclock, ddrclock and usbclock.
 
-               CONFIG_SYS_CPC_REINIT_F
-               This CONFIG is defined when the CPC is configured as SRAM at the
-               time of U-Boot entry and is required to be re-initialized.
-
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -1334,10 +1330,6 @@ The following options need to be configured:
                Enables support for FPGA family.
                (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
 
-               CONFIG_SYS_FPGA_PROG_FEEDBACK
-
-               Enable printing of hash marks during FPGA configuration.
-
                CONFIG_SYS_FPGA_CHECK_BUSY
 
                Enable checks on FPGA configuration interface busy
@@ -1350,9 +1342,6 @@ The following options need to be configured:
                If defined, a function that provides delays in the FPGA
                configuration driver.
 
-               CONFIG_SYS_FPGA_CHECK_CTRLC
-               Allow Control-C to interrupt FPGA configuration
-
                CONFIG_SYS_FPGA_CHECK_ERROR
 
                Check for configuration errors during FPGA bitfile
@@ -1740,12 +1729,6 @@ Configuration Settings:
 
                Non-cached memory is only supported on 32-bit ARM at present.
 
-- CONFIG_SYS_BOOTM_LEN:
-               Normally compressed uImages are limited to an
-               uncompressed size of 8 MBytes. If this is not enough,
-               you can define CONFIG_SYS_BOOTM_LEN in your board config file
-               to adjust this setting to your needs.
-
 - CONFIG_SYS_BOOTMAPSZ:
                Maximum size of memory mapped by the startup code of
                the Linux kernel; all data that must be processed by
@@ -1758,11 +1741,6 @@ Configuration Settings:
                CONFIG_SYS_BOOTMAPSZ.  If CONFIG_SYS_BOOTMAPSZ is undefined,
                then the value in "bootm_size" will be used instead.
 
-- CONFIG_SYS_BOOT_RAMDISK_HIGH:
-               Enable initrd_high functionality.  If defined then the
-               initrd_high feature is enabled and the bootm ramdisk subcommand
-               is enabled.
-
 - CONFIG_SYS_BOOT_GET_CMDLINE:
                Enables allocating and saving kernel cmdline in space between
                "bootm_low" and "bootm_low" + BOOTMAPSZ.