* Patch by Martin Krause, 17 Jul 2003:

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 8b2b1af..1c40711 100644 (file)
--- a/README
+++ b/README
@@ -197,7 +197,7 @@ Directory Hierarchy:
 - board/lwmon  Files specific to LWMON      boards
 - board/mbx8xx Files specific to MBX        boards
 - board/mpc8260ads
-               Files specific to MMPC8260ADS boards
+               Files specific to MPC8260ADS and PQ2FADS-ZU boards
 - board/mpl/   Files specific to boards manufactured by MPL
 - board/mpl/common     Common files for MPL boards
 - board/mpl/pip405     Files specific to PIP405     boards
@@ -383,6 +383,14 @@ The following options need to be configured:
                                          the lcd display every second with
                                          a "rotator" |\-/|\-/
 
+- Board flavour: (if CONFIG_MPC8260ADS is defined)
+               CONFIG_ADSTYPE
+               Possible values are:
+                       CFG_8260ADS     - original MPC8260ADS
+                       CFG_8266ADS     - MPC8266ADS (untested)
+                       CFG_PQ2FADS     - PQ2FADS-ZU
+
+
 - MPC824X Family Member (if CONFIG_MPC824X is defined)
        Define exactly one of
        CONFIG_MPC8240, CONFIG_MPC8245
@@ -989,8 +997,8 @@ The following options need to be configured:
                is FALSE, it clears it (low).
 
                eg: #define I2C_SDA(bit) \
-                        if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
-                        else    immr->im_cpm.cp_pbdat &= ~PB_SDA
+                       if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+                       else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 
                I2C_SCL(bit)
 
@@ -998,8 +1006,8 @@ The following options need to be configured:
                is FALSE, it clears it (low).
 
                eg: #define I2C_SCL(bit) \
-                        if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-                        else    immr->im_cpm.cp_pbdat &= ~PB_SCL
+                       if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+                       else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 
                I2C_DELAY
 
@@ -1687,9 +1695,10 @@ Low Level (hardware related) configuration options:
 
 - CFG_DEFAULT_IMMR:
                Default address of the IMMR after system reset.
-               Needed on some 8260 systems (MPC8260ADS and RPXsuper)
-               to be able to adjust the position of the IMMR
-               register after a reset.
+
+                Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
+                and RPXsuper) to be able to adjust the position of
+                the IMMR register after a reset.
 
 - Floppy Disk Support:
                CFG_FDC_DRIVE_NUMBER
@@ -1862,7 +1871,7 @@ configurations; the following names are supported:
     GENIETV_config       TQM823L_config        PIP405_config
     GEN860T_config       EBONY_config          FPS860L_config
     ELPT860_config       cmi_mpc5xx_config     NETVIA_config
-    at91rm9200dk_config          omap1510inn_config
+    at91rm9200dk_config          omap1510inn_config    MPC8260ADS_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for