CONFIG_TULIP
Support for Digital 2114x chips.
- Optional CONFIG_TULIP_SELECT_MEDIA for board specific
- modem chip initialisation (KS8761/QS6611).
CONFIG_NATSEMI
Support for National dp83815 chips.
- activate this driver with CONFIG_SYS_I2C_RCAR
- This driver adds 4 i2c buses
- - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0
- - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0
- - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1
- - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1
- - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2
- - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2
- - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3
- - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3
- - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses
-
- drivers/i2c/sh_i2c.c:
- activate this driver with CONFIG_SYS_I2C_SH
- This driver adds from 2 to 5 i2c buses
- CONFIG_SYS_BAUDRATE_TABLE:
List of legal baudrate settings for this board.
-- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
- Begin and End addresses of the area used by the
- simple memory test.
-
-- CONFIG_SYS_MEMTEST_SCRATCH:
- Scratch address used by the alternate memory test
- You only need to set this if address zero isn't writeable
-
- CONFIG_SYS_MEM_RESERVE_SECURE
Only implemented for ARMv8 for now.
If defined, the size of CONFIG_SYS_MEM_RESERVE_SECURE memory
regular expression. This allows multiple variables to define the same
flags without explicitly listing them for each variable.
-- CONFIG_ENV_ACCESS_IGNORE_FORCE
- If defined, don't allow the -f switch to env set override variable
- access flags.
-
The following definitions that deal with the placement and management
of environment data (variable area); in general, we support the
following configurations: