cmd: Convert CONFIG_CMD_ELF to Kconfig

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 1acc355..0dc657d 100644 (file)
--- a/README
+++ b/README
@@ -681,8 +681,10 @@ The following options need to be configured:
                CONFIG_ARM_ERRATA_742230
                CONFIG_ARM_ERRATA_743622
                CONFIG_ARM_ERRATA_751472
-               CONFIG_ARM_ERRATA_794072
                CONFIG_ARM_ERRATA_761320
+               CONFIG_ARM_ERRATA_773022
+               CONFIG_ARM_ERRATA_774769
+               CONFIG_ARM_ERRATA_794072
 
                If set, the workarounds for these ARM errata are applied early
                during U-Boot startup. Note that these options force the
@@ -840,18 +842,6 @@ The following options need to be configured:
                define this to a list of base addresses for each (supported)
                port. See e.g. include/configs/versatile.h
 
-               CONFIG_PL011_SERIAL_RLCR
-
-               Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
-               have separate receive and transmit line control registers.  Set
-               this variable to initialize the extra register.
-
-               CONFIG_PL011_SERIAL_FLUSH_ON_INIT
-
-               On some platforms (e.g. U8500) U-Boot is loaded by a second stage
-               boot loader that has already initialized the UART.  Define this
-               variable to flush the UART at init time.
-
                CONFIG_SERIAL_HW_FLOW_CONTROL
 
                Define this variable to enable hw flow control in serial driver.
@@ -2371,16 +2361,20 @@ CBFS (Coreboot Filesystem) support
 
                - drivers/i2c/i2c_mxc.c
                  - activate this driver with CONFIG_SYS_I2C_MXC
+                 - enable bus 1 with CONFIG_SYS_I2C_MXC_I2C1
+                 - enable bus 2 with CONFIG_SYS_I2C_MXC_I2C2
+                 - enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3
+                 - enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4
                  - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED
                  - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE
                  - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED
                  - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE
                  - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED
                  - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
+                 - define speed for bus 4 with CONFIG_SYS_MXC_I2C4_SPEED
+                 - define slave for bus 4 with CONFIG_SYS_MXC_I2C4_SLAVE
                If those defines are not set, default value is 100000
                for speed, and 0 for slave.
-                 - enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3
-                 - enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4
 
                - drivers/i2c/rcar_i2c.c:
                  - activate this driver with CONFIG_SYS_I2C_RCAR