param header, the default value is zero if undefined.
- Serial Ports:
- CFG_PL010_SERIAL
+ CONFIG_PL010_SERIAL
Define this if you want support for Amba PrimeCell PL010 UARTs.
- CFG_PL011_SERIAL
+ CONFIG_PL011_SERIAL
Define this if you want support for Amba PrimeCell PL011 UARTs.
If defined, then this indicates the I2C bus number for the DTT.
If not defined, then U-Boot assumes that DTT is on I2C bus 0.
+ CFG_I2C_DTT_ADDR:
+
+ If defined, specifies the I2C address of the DTT device.
+ If not defined, then U-Boot uses predefined value for
+ specified DTT device.
+
CONFIG_FSL_I2C
Define this option if you want to use Freescale's I2C driver in
accordingly!
-- CFG_ENV_IS_IN_NVRAM:
+- CONFIG_ENV_IS_IN_NVRAM:
Define this if you have some non-volatile memory device
(NVRAM, battery buffered SRAM) which you want to use for the
to save the current settings.
-- CFG_ENV_IS_IN_EEPROM:
+- CONFIG_ENV_IS_IN_EEPROM:
Use this if you have an EEPROM or similar serial access
device and a driver for it.
The size in bytes of the EEPROM device.
-- CFG_ENV_IS_IN_DATAFLASH:
+- CONFIG_ENV_IS_IN_DATAFLASH:
Define this if you have a DataFlash memory device which you
want to use for the environment.
environment area within the total memory of your DataFlash placed
at the specified address.
-- CFG_ENV_IS_IN_NAND:
+- CONFIG_ENV_IS_IN_NAND:
Define this if you have a NAND device which you want to use
for the environment.
* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
- LynxOS, pSOS, QNX, RTEMS, ARTOS;
- Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
+ LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
+ Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
+ INTEGRITY).
* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
Just make sure your machine specific header file (for instance
include/asm-ppc/tqm8xx.h) includes the same definition of the Board
-Information structure as we define in include/u-boot.h, and make
-sure that your definition of IMAP_ADDR uses the same value as your
-U-Boot configuration in CFG_IMMR.
+Information structure as we define in include/asm-<arch>/u-boot.h,
+and make sure that your definition of IMAP_ADDR uses the same value
+as your U-Boot configuration in CFG_IMMR.
Configuring the Linux kernel: