- activate this driver with CONFIG_SYS_I2C_RCAR
- This driver adds 4 i2c buses
- - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0
- - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0
- - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1
- - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1
- - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2
- - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2
- - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3
- - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3
- - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses
-
- drivers/i2c/sh_i2c.c:
- activate this driver with CONFIG_SYS_I2C_SH
- This driver adds from 2 to 5 i2c buses
$ CROSS_COMPILE=ppc_4xx-
$ export CROSS_COMPILE
-Note: If you wish to generate Windows versions of the utilities in
- the tools directory you can use the MinGW toolchain
- (http://www.mingw.org). Set your HOST tools to the MinGW
- toolchain and execute 'make tools'. For example:
-
- $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
-
- Binaries such as tools/mkimage.exe will be created which can
- be executed on computers running Windows.
-
U-Boot is intended to be simple to build. After installing the
sources you must configure U-Boot for one specific board type. This
is done by typing: