-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
-# License along with this program; if not, see <http://www.gnu.org/licenses/>.
+# License along with this program; if not, see <https://www.gnu.org/licenses/>.
VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
esac; \
- test $$am__dry = yes; \
- }
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure AUTHORS COPYING COPYING.LESSER \
- ChangeLog INSTALL NEWS THANKS TODO build-aux/compile \
- build-aux/config.guess build-aux/config.sub build-aux/depcomp \
- build-aux/install-sh build-aux/ltmain.sh build-aux/mdate-sh \
- build-aux/missing build-aux/mkinstalldirs \
- build-aux/texinfo.tex missing
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(top_srcdir)/conf/config.h.in \
+ $(top_srcdir)/build-aux/mkinstalldirs COPYING COPYING.LESSER \
+ THANKS TODO build-aux/compile build-aux/config.guess \
+ build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+ build-aux/mdate-sh missing build-aux/missing \
+ build-aux/mkinstalldirs build-aux/texinfo.tex \
+ build-aux/ltmain.sh $(top_srcdir)/build-aux/compile \
+ $(top_srcdir)/build-aux/config.guess \
+ $(top_srcdir)/build-aux/config.sub \
+ $(top_srcdir)/build-aux/install-sh \
+ $(top_srcdir)/build-aux/ltmain.sh \
+ $(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/glib-2.0.m4 \
- $(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnupg-ttyname.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_cxx_compile_stdcxx.m4 \
+ $(top_srcdir)/m4/ax_pkg_swig.m4 \
+ $(top_srcdir)/m4/ax_python_devel.m4 \
+ $(top_srcdir)/m4/glib-2.0.m4 $(top_srcdir)/m4/glibc21.m4 \
+ $(top_srcdir)/m4/gnupg-ttyname.m4 \
$(top_srcdir)/m4/gpg-error.m4 $(top_srcdir)/m4/libassuan.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.ac
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \
+ $(top_srcdir)/m4/python.m4 $(top_srcdir)/m4/qt.m4 \
+ $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
-CONFIG_HEADER = config.h
+CONFIG_HEADER = $(top_builddir)/conf/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
+am__v_at_1 =
SOURCES =
DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+CSCOPE = cscope
DIST_SUBDIRS = src tests doc lang
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
+DIST_ARCHIVES = $(distdir).tar.bz2
+DIST_TARGETS = dist-bzip2
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
+ENABLED_LANGUAGES = @ENABLED_LANGUAGES@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GITLOG_TO_CHANGELOG = @GITLOG_TO_CHANGELOG@
GLIB_MKENUMS = @GLIB_MKENUMS@
GOBJECT_QUERY = @GOBJECT_QUERY@
GPGME_CONFIG_API_VERSION = @GPGME_CONFIG_API_VERSION@
+GPGME_CONFIG_AVAIL_LANG = @GPGME_CONFIG_AVAIL_LANG@
GPGME_CONFIG_CFLAGS = @GPGME_CONFIG_CFLAGS@
GPGME_CONFIG_HOST = @GPGME_CONFIG_HOST@
GPGME_CONFIG_LIBS = @GPGME_CONFIG_LIBS@
+GPGME_QTTEST_CFLAGS = @GPGME_QTTEST_CFLAGS@
+GPGME_QTTEST_LIBS = @GPGME_QTTEST_LIBS@
+GPGME_QT_CFLAGS = @GPGME_QT_CFLAGS@
+GPGME_QT_LIBS = @GPGME_QT_LIBS@
GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@
GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@
GPG_ERROR_LIBS = @GPG_ERROR_LIBS@
GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@
GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@
+GRAPHVIZ = @GRAPHVIZ@
GREP = @GREP@
+HAVE_CXX11 = @HAVE_CXX11@
+HAVE_DOT = @HAVE_DOT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
LIBASSUAN_CFLAGS = @LIBASSUAN_CFLAGS@
LIBASSUAN_CONFIG = @LIBASSUAN_CONFIG@
LIBASSUAN_LIBS = @LIBASSUAN_LIBS@
+LIBGPGMEPP_LT_AGE = @LIBGPGMEPP_LT_AGE@
+LIBGPGMEPP_LT_CURRENT = @LIBGPGMEPP_LT_CURRENT@
+LIBGPGMEPP_LT_REVISION = @LIBGPGMEPP_LT_REVISION@
LIBGPGME_LT_AGE = @LIBGPGME_LT_AGE@
LIBGPGME_LT_CURRENT = @LIBGPGME_LT_CURRENT@
LIBGPGME_LT_REVISION = @LIBGPGME_LT_REVISION@
LIBOBJS = @LIBOBJS@
+LIBQGPGME_LT_AGE = @LIBQGPGME_LT_AGE@
+LIBQGPGME_LT_CURRENT = @LIBQGPGME_LT_CURRENT@
+LIBQGPGME_LT_REVISION = @LIBQGPGME_LT_REVISION@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
+MOC = @MOC@
+MOC2 = @MOC2@
NEED__FILE_OFFSET_BITS = @NEED__FILE_OFFSET_BITS@
NM = @NM@
NMEDIT = @NMEDIT@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
-QT4_CORE_CFLAGS = @QT4_CORE_CFLAGS@
-QT4_CORE_LIBS = @QT4_CORE_LIBS@
+PYTHON = @PYTHON@
+PYTHONS = @PYTHONS@
+PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_EXTRA_LDFLAGS = @PYTHON_EXTRA_LDFLAGS@
+PYTHON_EXTRA_LIBS = @PYTHON_EXTRA_LIBS@
+PYTHON_LDFLAGS = @PYTHON_LDFLAGS@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_SITE_PKG = @PYTHON_SITE_PKG@
+PYTHON_VERSION = @PYTHON_VERSION@
+QTCHOOSER = @QTCHOOSER@
RANLIB = @RANLIB@
RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SWIG = @SWIG@
+SWIG_LIB = @SWIG_LIB@
SYSROOT = @SYSROOT@
VERSION = @VERSION@
+VERSION_MAJOR = @VERSION_MAJOR@
+VERSION_MICRO = @VERSION_MICRO@
+VERSION_MINOR = @VERSION_MINOR@
VERSION_NUMBER = @VERSION_NUMBER@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+
+# Location of the released tarball archives. Note that this is an
+# internal archive and before uploading this to the public server,
+# manual tests should be run and the git release tat set and pushed.
+# Adjust as needed.
+RELEASE_ARCHIVE_DIR = wk@vigenere:tarballs/gpgme/
+
+# The key used to sign the released sources. Adjust as needed.
+RELEASE_SIGNING_KEY = D8692123C4065DEA5E0F3AB5249B39D24F25E3B6
+
+# Autoconf flags
ACLOCAL_AMFLAGS = -I m4
-AUTOMAKE_OPTIONS = dist-bzip2
DISTCHECK_CONFIGURE_FLAGS =
EXTRA_DIST = autogen.sh autogen.rc gpgme.spec.in \
- ChangeLog-2011 m4/ChangeLog-2011 contrib/ChangeLog-2011
+ ChangeLog-2011 m4/ChangeLog-2011 contrib/ChangeLog-2011 \
+ conf/whatisthis
@RUN_GPG_TESTS_FALSE@tests =
@RUN_GPG_TESTS_TRUE@tests = tests
SUBDIRS = src ${tests} doc lang
gen_start_date = 2011-12-01T00:00:00
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+# Macro to help the release target.
+RELEASE_NAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION)
+all: all-recursive
.SUFFIXES:
am--refresh: Makefile
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
-config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+conf/config.h: conf/stamp-h1
+ @test -f $@ || rm -f conf/stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) conf/stamp-h1
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+conf/stamp-h1: $(top_srcdir)/conf/config.h.in $(top_builddir)/config.status
+ @rm -f conf/stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status conf/config.h
+$(top_srcdir)/conf/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f stamp-h1
+ rm -f conf/stamp-h1
touch $@
distclean-hdr:
- -rm -f config.h stamp-h1
+ -rm -f conf/config.h conf/stamp-h1
mostlyclean-libtool:
-rm -f *.lo
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-shar: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod u+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
- $(am__remove_distdir)
+ $(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
exit 1; } >&2
check-am: all-am
check: check-recursive
-all-am: Makefile config.h
+all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \
- dist-xz dist-zip distcheck distclean distclean-generic \
- distclean-hdr distclean-libtool distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool cscope cscopelist-am ctags ctags-am dist \
+ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
+ dist-tarZ dist-xz dist-zip distcheck distclean \
+ distclean-generic distclean-hdr distclean-libtool \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am
# Fix the version of the spec file and create a file named VERSION
# to be used for patch's Prereq: feature.
dist-hook: gen-ChangeLog
@set -e; \
- sed -e 's/@pkg_version@/$(VERSION)/g' \
+ sed -e 's/@pkg_version@/$(PACKAGE_VERSION)/g' \
$(top_srcdir)/gpgme.spec.in > $(distdir)/gpgme.spec
- echo "$(VERSION)" > $(distdir)/VERSION
-.PHONY: gen-ChangeLog
+ echo "$(PACKAGE_VERSION)" > $(distdir)/VERSION
+
+distcheck-hook:
+ set -e; ( \
+ pref="#+macro: gpgme_" ;\
+ reldate="$$(date -u +%Y-%m-%d)" ;\
+ echo "$${pref}ver $(PACKAGE_VERSION)" ;\
+ echo "$${pref}date $${reldate}" ;\
+ list='$(DIST_ARCHIVES)'; for i in $$list; do \
+ case "$$i" in *.tar.bz2) \
+ echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\
+ echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\
+ echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\
+ esac;\
+ done ) | tee $(distdir).swdb
+
+.PHONY: gen-ChangeLog release sign-release
gen-ChangeLog:
if test -d $(top_srcdir)/.git; then \
(cd $(top_srcdir) && \
mv $(distdir)/cl-t $(distdir)/ChangeLog; \
fi
+release:
+ +(set -e;\
+ if [ "$(abs_top_builddir)" = "$(abs_top_srcdir)" ]; then \
+ echo "error: build directory must not be the source directory" >&2;\
+ exit 2;\
+ fi ;\
+ echo "/* Build started at $$(date -uIseconds) */" ;\
+ cd $(top_srcdir); \
+ ./autogen.sh --force; \
+ cd $(abs_top_builddir); \
+ rm -rf dist; mkdir dist ; cd dist ; \
+ $(abs_top_srcdir)/configure --enable-maintainer-mode; \
+ $(MAKE) distcheck TESTFLAGS=--parallel; \
+ echo "/* Build finished at $$(date -uIseconds) */" ;\
+ echo "/*" ;\
+ echo " * Please run the final step interactivly:" ;\
+ echo " * make sign-release" ;\
+ echo " */" ;\
+ ) 2>&1 | tee "$(RELEASE_NAME).buildlog"
+
+sign-release:
+ +(set -e; \
+ cd dist; \
+ files1="$(RELEASE_NAME).tar.bz2" ;\
+ files2="$(RELEASE_NAME).tar.bz2.sig \
+ $(RELEASE_NAME).swdb \
+ $(RELEASE_NAME).buildlog" ;\
+ echo "/* Signing the source tarball ..." ;\
+ gpg -sbu $(RELEASE_SIGNING_KEY) $(RELEASE_NAME).tar.bz2 ;\
+ cat $(RELEASE_NAME).swdb >swdb.snippet;\
+ echo >>swdb.snippet ;\
+ sha1sum $${files1} >>swdb.snippet ;\
+ cat "../$(RELEASE_NAME).buildlog" swdb.snippet \
+ | gzip >$(RELEASE_NAME).buildlog ;\
+ echo "Copying to local archive ..." ;\
+ scp -p $${files1} $${files2} $(RELEASE_ARCHIVE_DIR)/ || true;\
+ echo "Uploading documentation ..." ;\
+ $(MAKE) -C doc online; \
+ echo '/*' ;\
+ echo ' * All done; for checksums see dist/swdb.snippet' ;\
+ echo ' */' ;\
+ )
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: