## Makefile for Automake.
-# Copyright (C) 1995-2012 Free Software Foundation, Inc.
+# Copyright (C) 1995-2013 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-## lib goes first, because it builds Config.pm, used by aclocal and
-## automake (run in doc, tests, and in the rebuild rules.)
-## '.' goes before doc and tests, because the latter two directories
-## run aclocal and automake.
-SUBDIRS = lib . contrib doc m4 tests
+## Might be updated later.
+CLEANFILES =
+DISTCLEANFILES =
+MAINTAINERCLEANFILES =
+EXTRA_DIST =
+
+## ------------ ##
+## Top level. ##
+## ------------ ##
+
+# We want a handful of substitutions to be fully-expanded by make;
+# then use config.status to substitute the remainder where a single
+# expansion is sufficient. We use a funny notation here to avoid
+# configure substitutions in our text.
+do_subst = ( sed \
+ -e "s,[@]configure_input[@],Generated from $$in; do not edit by hand.,g" \
+ -e 's,[@]datadir[@],$(datadir),g' \
+ -e 's,[@]amdir[@],$(amdir),g' \
+ -e 's,[@]bindir[@],$(bindir),g' \
+ -e 's,[@]docdir[@],$(docdir),g' \
+ -e 's,[@]pkgvdatadir[@],$(pkgvdatadir),g' \
+ -e 's,[@]scriptdir[@],$(scriptdir),g' \
+ -e 's,[@]automake_acdir[@],$(automake_acdir),g' \
+ -e 's,[@]system_acdir[@],$(system_acdir),g' \
+## Hack to avoid a spurious substitution in the Automake script (part 1).
+ -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' \
+ | $(SHELL) ./config.status --file=- \
+## Hack to avoid a spurious substitution in the Automake script (part 2).
+ | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' \
+ )
+
+# Generated files shouldn't contain unexpanded '@substitutions@', and
+# should be made read-only, to prevent them from being edited by mistake
+# instead of the file the are generated from.
+generated_file_finalize = $(AM_V_at) \
+ if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' $@-t; then \
+ echo "$@ contains unexpanded substitution (see lines above)"; \
+ exit 1; \
+ fi; \
+ chmod a-w $@-t && mv -f $@-t $@
bin_SCRIPTS = automake aclocal
-CLEANFILES = $(bin_SCRIPTS)
+CLEANFILES += $(bin_SCRIPTS)
AUTOMAKESOURCES = automake.in aclocal.in
TAGS_FILES = $(AUTOMAKESOURCES)
-EXTRA_DIST = \
+EXTRA_DIST += \
+ $(AUTOMAKESOURCES) \
+ bootstrap.sh \
GNUmakefile \
+ maint.mk \
syntax-checks.mk \
- HACKING \
- ChangeLog.96 \
- ChangeLog.98 \
- ChangeLog.00 \
- ChangeLog.01 \
- ChangeLog.02 \
- ChangeLog.03 \
- ChangeLog.04 \
- ChangeLog.09 \
- ChangeLog.11 \
- bootstrap \
- $(gitlog_to_changelog_fixes) \
- $(AUTOMAKESOURCES)
-
-## Make versioned links. We only run the transform on the root name;
-## then we make a versioned link with the transformed base name. This
-## seemed like the most reasonable approach.
+ HACKING
+
+# For some tests or targets, we need to have the just-build automake and
+# aclocal scripts avaiable on PATH.
+extend_PATH = \
+ { PATH='$(abs_builddir)/t/wrap'$(PATH_SEPARATOR)$$PATH && export PATH; }
+
+# Make versioned links. We only run the transform on the root name;
+# then we make a versioned link with the transformed base name. This
+# seemed like the most reasonable approach.
install-exec-hook:
@$(POST_INSTALL)
@for p in $(bin_SCRIPTS); do \
- f="`echo $$p|sed '$(transform)'`"; \
+ f=`echo $$p | sed '$(transform)'`; \
fv="$$f-$(APIVERSION)"; \
rm -f "$(DESTDIR)$(bindir)/$$fv"; \
echo " $(LN) '$(DESTDIR)$(bindir)/$$f' '$(DESTDIR)$(bindir)/$$fv'"; \
uninstall-hook:
@for p in $(bin_SCRIPTS); do \
- f="`echo $$p|sed '$(transform)'`"; \
+ f=`echo $$p | sed '$(transform)'`; \
fv="$$f-$(APIVERSION)"; \
rm -f "$(DESTDIR)$(bindir)/$$fv"; \
done
-
-## We can't use configure to do the substitution here; we must do it
-## by hand. We use a funny notation here to avoid configure
-## substitutions in our text.
-do_subst = sed \
- -e 's,[@]APIVERSION[@],$(APIVERSION),g' \
- -e 's,[@]PACKAGE[@],$(PACKAGE),g' \
- -e 's,[@]PACKAGE_BUGREPORT[@],$(PACKAGE_BUGREPORT),g' \
- -e 's,[@]PACKAGE_URL[@],$(PACKAGE_URL),g' \
- -e 's,[@]PATH_SEPARATOR[@],$(PATH_SEPARATOR),g' \
- -e 's,[@]PERL[@],$(PERL),g' \
- -e 's,[@]PERL_THREADS[@],$(PERL_THREADS),g' \
- -e 's,[@]SHELL[@],$(SHELL),g' \
- -e 's,[@]am_AUTOCONF[@],$(am_AUTOCONF),g' \
- -e 's,[@]am_AUTOM4TE[@],$(am_AUTOM4TE),g' \
- -e 's,[@]VERSION[@],$(VERSION),g' \
- -e 's,[@]configure_input[@],Generated from $@.in; do not edit by hand.,g' \
- -e 's,[@]datadir[@],$(datadir),g'
-
-## These files depend on Makefile so they are rebuilt if $(VERSION),
-## $(datadir) or other do_subst'ituted variables change.
-## Use chmod a-w to prevent people from editing the wrong file by accident.
+# These files depend on Makefile so they are rebuilt if $(VERSION),
+# $(datadir) or other do_subst'ituted variables change.
automake: automake.in
aclocal: aclocal.in
automake aclocal: Makefile
$(AM_V_at)rm -f $@ $@-t
- $(AM_V_GEN)$(do_subst) $(srcdir)/$@.in >$@-t
+ $(AM_V_GEN)in=$@.in; $(do_subst) <$(srcdir)/$@.in >$@-t
+## We can't use '$(generated_file_finalize)' here, because currently
+## Automake contains occurrences of unexpanded @substitutions@ in
+## comments, and that is perfectly legit.
$(AM_V_at)chmod a+x,a-w $@-t && mv -f $@-t $@
-## The master location for INSTALL is lib/INSTALL.
-## This is where "make fetch" will install new versions.
-## Make sure we also update this copy.
+# The master location for INSTALL is lib/INSTALL.
+# This is where "make fetch" will install new versions.
+# Make sure we also update this copy.
INSTALL: lib/INSTALL
$(AM_V_GEN)cp $(srcdir)/lib/INSTALL $@
-# Convenience proxy target for the test suites.
-recheck:
- $(am__cd) tests && $(MAKE) $(AM_MAKEFLAGS) $@
-.PHONY: recheck
-
-################################################################
-##
-## Everything past here is useful to the maintainer, but probably not
-## to anybody else
-##
-
-gitlog_to_changelog_command = $(PERL) $(srcdir)/lib/gitlog-to-changelog
-gitlog_to_changelog_fixes = $(srcdir)/.git-log-fix
-gitlog_to_changelog_options = --amend=$(gitlog_to_changelog_fixes) \
- --since='2011-12-28 00:00:00' \
- --no-cluster --format '%s%n%n%b'
-
-# Automatic generation of the ChangeLog from git history.
-#
-# When executed from a git checkout, generate the ChangeLog from the git
-# history. When executed from an extracted distribution tarball, just
-# copy the distributed ChangeLog in the build directory (and if this
-# fails, or if no distributed ChangeLog file is present, complain and
-# give an error).
-#
-# We need the apparently useless dependency from another .PHONY target
-# 'am--changelog-regen-hook' to work around a bug of Solaris make, which
-# doesn't execute the recipe of a target named as an existing file, even
-# if such target is declared '.PHONY' (yikes!)
-#
-.PHONY: am--changelog-regen-hook
-am--changelog-regen-hook:
-ChangeLog: am--changelog-regen-hook
- $(AM_V_GEN)set -e; set -u; \
-## The ChangeLog should be regenerated unconditionally when working from
-## checked-out sources; otherwise, if we're working from a distribution
-## tarball, we expect the ChangeLog to be distributed, so check that it
-## is indeed present in the source directory.
- if test -d $(srcdir)/.git; then \
- rm -f $@-t \
- && $(gitlog_to_changelog_command) \
- $(gitlog_to_changelog_options) >$@-t \
- && chmod a-w $@-t \
- && mv -f $@-t $@ \
- || exit 1; \
- elif test ! -f $(srcdir)/$@; then \
- echo "Source tree is not a git checkout, and no pre-existent" \
- "$@ file has been found there" >&2; \
- exit 1; \
- fi
-
-# Ensure tests are world-executable
-dist-hook:
- $(am__cd) $(distdir)/tests && chmod a+rx *.test
-
-
-# Perl coverage statistics.
-PERL_COVERAGE_DB = $(abs_top_builddir)/cover_db
-PERL_COVERAGE_FLAGS = -MDevel::Cover=-db,$(PERL_COVERAGE_DB),-silent,on,-summary,off
-PERL_COVER = cover
-
-check-coverage-run recheck-coverage-run: all
- $(mkinstalldirs) $(PERL_COVERAGE_DB)
- PERL5OPT="$$PERL5OPT $(PERL_COVERAGE_FLAGS)"; export PERL5OPT; \
- WANT_NO_THREADS=yes; export WANT_NO_THREADS; unset AUTOMAKE_JOBS; \
- $(MAKE) $(AM_MAKEFLAGS) `echo $@ | sed 's/-coverage-run//'`
-
-check-coverage-report:
- @if test ! -d "$(PERL_COVERAGE_DB)"; then \
- echo "No coverage database found in '$(PERL_COVERAGE_DB)'." >&2; \
- echo "Please run \"make check-coverage\" first" >&2; \
- exit 1; \
- fi
- $(PERL_COVER) $(PERL_COVER_FLAGS) "$(PERL_COVERAGE_DB)"
-
-# We don't use direct dependencies here because we'd like to be able
-# to invoke the report even after interrupted check-coverage.
-check-coverage: check-coverage-run
- $(MAKE) $(AM_MAKEFLAGS) check-coverage-report
-
-recheck-coverage: recheck-coverage-run
- $(MAKE) $(AM_MAKEFLAGS) check-coverage-report
-
-clean-coverage:
- rm -rf "$(PERL_COVERAGE_DB)"
-clean-local: clean-coverage
-
-.PHONY: check-coverage recheck-coverage check-coverage-run \
- recheck-coverage-run check-coverage-report clean-coverage
-
-## Tagging and/or uploading stable and beta releases.
-
-GIT = git
-
-version_rx = ^[1-9][0-9]*\.[0-9][0-9]*(\.[0-9][0-9]*)?
-stable_version_rx = $(version_rx)$$
-beta_version_rx = $(version_rx)[bdfhjlnprtvxz]$$
-match_version = echo "$(VERSION)" | $(EGREP) >/dev/null
-
-## Check that we don't have uncommitted or unstaged changes.
-## TODO: Maybe the git suite already offers a shortcut to verify if the
-## TODO: working directory is "clean" or not? If yes, use that instead
-## TODO: of duplicating the logic here.
-git_must_have_clean_workdir = \
- $(GIT) rev-parse --verify HEAD >/dev/null \
- && $(GIT) update-index -q --refresh \
- && $(GIT) diff-files --quiet \
- && $(GIT) diff-index --quiet --cached HEAD \
- || fatal "you have uncommitted or unstaged changes"
-
-determine_release_type = \
- if $(match_version) '$(stable_version_rx)'; then \
- release_type='Release' dest=ftp; \
- elif $(match_version) '$(beta_version_rx)'; then \
- release_type='Beta release' dest=alpha; \
- else \
- fatal "invalid version '$(VERSION)' for a release"; \
- fi
-
-git-tag-release: maintainer-check
- @set -e; set -u; \
- fatal () { echo "$@: $$*; not tagging" >&2; exit 1; }; \
- case '$(AM_TAG_DRYRUN)' in \
- ""|[nN]|[nN]o|NO) run="";; \
- *) run="echo Running:";; \
- esac; \
- $(determine_release_type); \
- $(git_must_have_clean_workdir); \
-## Make sure the NEWS file is up-to-date.
- sed 1q $(srcdir)/NEWS | grep '$(VERSION)' >/dev/null \
- || fatal "NEWS not updated"; \
-## If all was successful, tag the release in the local repository.
- $$run $(GIT) tag -s "v$(VERSION)" -m "$$release_type $(VERSION)"
-
-git-upload-release:
- @set -e; set -u; \
- fatal () { echo "$@: $$*; not releasing" >&2; exit 1; }; \
- $(determine_release_type); \
- dest=$$dest.gnu.org:automake; \
- $(git_must_have_clean_workdir); \
-## Check that we are releasing from a valid tag.
- tag=`$(GIT) describe` \
- && case $$tag in "v$(VERSION)") true;; *) false;; esac \
- || fatal "you can only create a release from a tagged version"; \
-## Build and upload the distribution tarball(s).
- $(MAKE) $(AM_MAKEFLAGS) dist || exit 1; \
- echo Will upload to $$dest: $(DIST_ARCHIVES); \
- $(srcdir)/lib/gnupload $(GNUPLOADFLAGS) --to $$dest $(DIST_ARCHIVES)
-
-.PHONY: git-upload-release git-tag-release
-
-## Visually comparing differences between the Makefile.in files in
-## automake's own build system as generated in two different branches
-## might help to catch bugs and blunders. This has already happened a
-## few times in the past, when we used to version-control Makefile.in.
-autodiffs:
- @set -u; \
- NEW_COMMIT=$${NEW_COMMIT-"HEAD"}; \
- OLD_COMMIT=$${OLD_COMMIT-"HEAD~1"}; \
- am_gitdir='$(abs_top_srcdir)/.git'; \
- get_autofiles_from_rev () \
- { \
- rev=$$1 dir=$$2 \
- && echo "$@: will get files from revision $$rev" \
- && $(GIT) clone -q --depth 1 "$$am_gitdir" tmp \
- && $(am__cd) tmp \
- && $(GIT) checkout -q "$$rev" \
- && echo "$@: bootstrapping $$rev" \
- && $(SHELL) ./bootstrap \
- && echo "$@: copying files from $$rev" \
- && makefile_ins=`find . -name Makefile.in` \
- && (tar cf - configure aclocal.m4 $$makefile_ins) | \
- (cd .. && $(am__cd) "$$dir" && tar xf -) \
- && cd .. \
- && rm -rf tmp; \
- }; \
- outdir=$@.dir \
-## Before proceeding, ensure the specified revisions truly exist.
- && $(GIT) --git-dir="$$am_gitdir" describe $$OLD_COMMIT >/dev/null \
- && $(GIT) --git-dir="$$am_gitdir" describe $$NEW_COMMIT >/dev/null \
- && rm -rf $$outdir \
- && mkdir $$outdir \
- && $(am__cd) $$outdir \
- && mkdir new old \
- && get_autofiles_from_rev $$OLD_COMMIT old \
- && get_autofiles_from_rev $$NEW_COMMIT new \
- && exit 0
-## With lots of eye candy; we like our developers pampered and spoiled :-)
-compare-autodiffs: autodiffs
- @set -u; \
- : $${COLORDIFF=colordiff} $${DIFF=diff}; \
- dir=autodiffs.dir; \
- if test ! -d "$$dir"; then \
- echo "$@: $$dir: Not a directory" >&2; \
- exit 1; \
- fi; \
- mydiff=false mypager=false; \
- if test -t 1; then \
- if ($$COLORDIFF -r . .) </dev/null >/dev/null 2>&1; then \
- mydiff=$$COLORDIFF; \
- mypager="less -R"; \
- else \
- mypager=less; \
- fi; \
- else \
- mypager=cat; \
- fi; \
- if test "$$mydiff" = false; then \
- if ($$DIFF -r -u . .); then \
- mydiff=$$DIFF; \
- else \
- echo "$@: no good-enough diff program specified" >&2; \
- exit 1; \
- fi; \
- fi; \
- st=0; $$mydiff -r -u $$dir/old $$dir/new | $$mypager || st=$$?; \
- rm -rf $$dir; \
- exit $$st
-.PHONY: autodiffs compare-autodiffs
-
-## Program to use to fetch files.
-WGET = wget
-WGET_SV_CVS = $(WGET) http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/
-WGET_SV_GIT_CF = $(WGET) 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;hb=HEAD;f='
-WGET_SV_GIT_AC = $(WGET) 'http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=blob_plain;hb=HEAD;f='
-WGET_SV_GIT_GL = $(WGET) 'http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;hb=HEAD;f='
-
-## Files that we fetch and which we compare against.
-## The 'lib/COPYING' file must still be synced by hand.
-FETCHFILES = \
-INSTALL \
-config.guess \
-config.sub \
-gnupload \
-gitlog-to-changelog \
-texinfo.tex \
-update-copyright
-
-## Fetch the latest versions of files we care about.
-fetch:
- rm -rf Fetchdir > /dev/null 2>&1
- mkdir Fetchdir
-## If a get fails then that is a problem.
- ($(am__cd) Fetchdir && \
- $(WGET_SV_GIT_CF)config.guess -O config.guess && \
- $(WGET_SV_GIT_CF)config.sub -O config.sub && \
- $(WGET_SV_CVS)texinfo/texinfo/doc/texinfo.tex -O texinfo.tex && \
- $(WGET_SV_GIT_GL)doc/INSTALL -O INSTALL && \
- $(WGET_SV_GIT_GL)build-aux/gnupload -O gnupload && \
- $(WGET_SV_GIT_GL)build-aux/update-copyright -O update-copyright && \
- $(WGET_SV_GIT_GL)build-aux/gitlog-to-changelog -O gitlog-to-changelog)
-## Don't exit after test because we want to give as many errors as
-## possible.
- @stat=0; for file in $(FETCHFILES); do \
- if diff -u $(srcdir)/lib/$$file Fetchdir/$$file \
- >>Fetchdir/update.patch 2>/dev/null; then :; \
- else \
- stat=1; \
- echo "Updating $(srcdir)/lib/$$file ..."; \
- cp Fetchdir/$$file $(srcdir)/lib/$$file; \
- fi; \
+# We don't use the default name for the autom4te cache directory,
+# so we need this.
+maintainer-clean-local:
+ rm -rf .autom4te.cache
+
+# So that automake won't complain about the missing ChangeLog.
+# The real rule for ChangeLog generation is now in maint.mk (as
+# it is maintainer-specific).
+ChangeLog:
+
+
+## -------------------------------------------------------------------- ##
+## Auxiliary scripts and files for use with "automake --add-missing". ##
+## -------------------------------------------------------------------- ##
+
+dist_pkgvdata_DATA = \
+ lib/COPYING \
+ lib/INSTALL \
+ lib/texinfo.tex
+
+# These must all be executable when installed. However, if we use
+# _SCRIPTS, then the program transform will be applied, which is not
+# what we want. So we make them executable by hand.
+dist_script_DATA = \
+ lib/config.guess \
+ lib/config.sub \
+ lib/install-sh \
+ lib/mdate-sh \
+ lib/missing \
+ lib/mkinstalldirs \
+ lib/ylwrap \
+ lib/depcomp \
+ lib/compile \
+ lib/py-compile \
+ lib/ar-lib \
+ lib/test-driver \
+ lib/tap-driver.sh \
+ lib/tap-driver.pl
+
+install-data-hook:
+ @$(POST_INSTALL)
+ @for f in $(dist_script_DATA); do echo $$f; done \
+ | sed 's,^lib/,,' \
+ | ( st=0; \
+ while read f; do \
+ echo " chmod +x '$(DESTDIR)$(scriptdir)/$$f'"; \
+ chmod +x "$(DESTDIR)$(scriptdir)/$$f" || st=1; \
+ done; \
+ exit $$st )
+
+installcheck-local: installcheck-executable-scripts
+installcheck-executable-scripts:
+ @for f in $(dist_script_DATA); do echo $$f; done \
+ | sed 's,^lib/,,' \
+ | while read f; do \
+ path="$(pkgvdatadir)/$$f"; \
+ test -x "$$path" || echo $$path; \
+ done \
+ | sed 's/$$/: not executable/' \
+ | grep . 1>&2 && exit 1; exit 0
+
+
+## ---------------------------------------------------- ##
+## Private perl modules used by automake and aclocal. ##
+## ---------------------------------------------------- ##
+
+perllibdir = $(pkgvdatadir)/Automake
+dist_perllib_DATA = \
+ lib/Automake/ChannelDefs.pm \
+ lib/Automake/Channels.pm \
+ lib/Automake/Condition.pm \
+ lib/Automake/Configure_ac.pm \
+ lib/Automake/DisjConditions.pm \
+ lib/Automake/FileUtils.pm \
+ lib/Automake/General.pm \
+ lib/Automake/Getopt.pm \
+ lib/Automake/Item.pm \
+ lib/Automake/ItemDef.pm \
+ lib/Automake/Location.pm \
+ lib/Automake/Options.pm \
+ lib/Automake/Rule.pm \
+ lib/Automake/RuleDef.pm \
+ lib/Automake/Variable.pm \
+ lib/Automake/VarDef.pm \
+ lib/Automake/Version.pm \
+ lib/Automake/XFile.pm \
+ lib/Automake/Wrap.pm
+
+nodist_perllib_DATA = lib/Automake/Config.pm
+CLEANFILES += $(nodist_perllib_DATA)
+
+lib/Automake/Config.pm: lib/Automake/Config.in Makefile
+ $(AM_V_at)rm -f $@ $@-t
+ $(AM_V_at)test -d lib/Automake || $(MKDIR_P) lib/Automake
+ $(AM_V_GEN)in=Config.in \
+ && $(do_subst) <$(srcdir)/lib/Automake/Config.in >$@-t
+ $(generated_file_finalize)
+EXTRA_DIST += lib/Automake/Config.in
+
+
+## --------------------- ##
+## Makefile fragments. ##
+## --------------------- ##
+
+dist_am_DATA = \
+ lib/am/check.am \
+ lib/am/check2.am \
+ lib/am/clean-hdr.am \
+ lib/am/clean.am \
+ lib/am/compile.am \
+ lib/am/configure.am \
+ lib/am/data.am \
+ lib/am/dejagnu.am \
+ lib/am/depend.am \
+ lib/am/depend2.am \
+ lib/am/distdir.am \
+ lib/am/footer.am \
+ lib/am/header-vars.am \
+ lib/am/header.am \
+ lib/am/install.am \
+ lib/am/inst-vars.am \
+ lib/am/java.am \
+ lib/am/lang-compile.am \
+ lib/am/lex.am \
+ lib/am/library.am \
+ lib/am/libs.am \
+ lib/am/libtool.am \
+ lib/am/lisp.am \
+ lib/am/ltlib.am \
+ lib/am/ltlibrary.am \
+ lib/am/mans-vars.am \
+ lib/am/mans.am \
+ lib/am/program.am \
+ lib/am/progs.am \
+ lib/am/python.am \
+ lib/am/remake-hdr.am \
+ lib/am/scripts.am \
+ lib/am/subdirs.am \
+ lib/am/tags.am \
+ lib/am/texi-vers.am \
+ lib/am/texibuild.am \
+ lib/am/texinfos.am \
+ lib/am/vala.am \
+ lib/am/yacc.am
+
+
+## ------------------------------ ##
+## Automake-provided m4 macros. ##
+## ------------------------------ ##
+
+dist_automake_ac_DATA = \
+ m4/amversion.m4 \
+ m4/ar-lib.m4 \
+ m4/as.m4 \
+ m4/auxdir.m4 \
+ m4/cond.m4 \
+ m4/cond-if.m4 \
+ m4/depend.m4 \
+ m4/depout.m4 \
+ m4/dmalloc.m4 \
+ m4/extra-recurs.m4 \
+ m4/gcj.m4 \
+ m4/init.m4 \
+ m4/install-sh.m4 \
+ m4/lead-dot.m4 \
+ m4/lex.m4 \
+ m4/lispdir.m4 \
+ m4/maintainer.m4 \
+ m4/make.m4 \
+ m4/minuso.m4 \
+ m4/missing.m4 \
+ m4/mkdirp.m4 \
+ m4/obsolete.m4 \
+ m4/options.m4 \
+ m4/python.m4 \
+ m4/runlog.m4 \
+ m4/sanity.m4 \
+ m4/silent.m4 \
+ m4/strip.m4 \
+ m4/substnot.m4 \
+ m4/tar.m4 \
+ m4/upc.m4 \
+ m4/vala.m4
+
+automake_internal_acdir = $(automake_acdir)/internal
+dist_automake_internal_ac_DATA = m4/internal/ac-config-macro-dirs.m4
+
+dist_system_ac_DATA = m4/acdir/README
+
+# We build amversion.m4 here, instead of from config.status,
+# because config.status is rerun each time one of configure's
+# dependencies change and amversion.m4 happens to be a configure
+# dependency. configure and amversion.m4 would be rebuilt in
+# loop otherwise.
+# Use '$(top_srcdir)/m4' for the benefit of non-GNU makes: this is
+# how amversion.m4 appears in our dependencies.
+$(top_srcdir)/m4/amversion.m4: $(srcdir)/configure.ac $(srcdir)/m4/amversion.in
+ $(AM_V_at)rm -f $@-t $@
+ $(AM_V_GEN)in=amversion.in \
+ && $(do_subst) <$(srcdir)/m4/amversion.in >$@-t
+ $(generated_file_finalize)
+EXTRA_DIST += m4/amversion.in
+
+
+## ------------ ##
+## Testsuite. ##
+## ------------ ##
+
+# Run the tests with a proper shell detected at configure time.
+LOG_COMPILER = $(AM_TEST_RUNNER_SHELL)
+
+TEST_EXTENSIONS = .pl .sh .tap
+SH_LOG_COMPILER = $(LOG_COMPILER)
+TAP_LOG_COMPILER = $(LOG_COMPILER)
+PL_LOG_COMPILER = $(PERL)
+AM_PL_LOG_FLAGS = -Mstrict -I $(builddir)/lib -I $(srcdir)/lib -w
+
+TAP_LOG_DRIVER = AM_TAP_AWK='$(AWK)' $(SHELL) $(srcdir)/lib/tap-driver.sh
+
+AM_TAP_LOG_DRIVER_FLAGS = --merge
+
+EXTRA_DIST += t/README t/ax/is t/ax/is_newest t/ax/deltree.pl
+
+## Will be updated later.
+TESTS =
+
+# Some testsuite-influential variables should be overridable from the
+# test scripts, but not from the environment.
+# Keep this in sync with the similar list in 'runtest.in'.
+AM_TESTS_ENVIRONMENT = \
+ for v in \
+ required \
+ am_test_protocol \
+ am_serial_tests \
+ am_test_prefer_config_shell \
+ am_original_AUTOMAKE \
+ am_original_ACLOCAL \
+ am_test_lib_sourced \
+ test_lib_sourced \
+ ; do \
+ eval test x"\$${$$v}" = x || unset $$v; \
+ done;
+# We want warning messages and explanations for skipped tests to go to
+# the console if possible, so set up 'stderr_fileno_' properly.
+AM_TESTS_FD_REDIRECT = 9>&2
+AM_TESTS_ENVIRONMENT += stderr_fileno_=9; export stderr_fileno_;
+
+# For sourcing of extra "shell libraries" by our test scripts. As per
+# POSIX, sourcing a file with '.' will cause it to be looked up in $PATH
+# in case it is given with a relative name containing no slashes.
+AM_TESTS_ENVIRONMENT += \
+ if test $(srcdir) != .; then \
+ PATH='$(abs_srcdir)/t/ax'$(PATH_SEPARATOR)$$PATH; \
+ fi; \
+ PATH='$(abs_builddir)/t/ax'$(PATH_SEPARATOR)$$PATH; \
+ export PATH;
+
+# Hand-written tests.
+
+include $(srcdir)/t/list-of-tests.mk
+
+TESTS += $(handwritten_TESTS)
+EXTRA_DIST += $(handwritten_TESTS)
+
+# Automatically-generated tests wrapping hand-written ones.
+# Also, automatically-computed dependencies for tests.
+
+include $(srcdir)/t/testsuite-part.am
+
+TESTS += $(generated_TESTS)
+EXTRA_DIST += $(generated_TESTS)
+
+$(srcdir)/t/testsuite-part.am:
+ $(AM_V_at)rm -f t/testsuite-part.tmp $@
+ $(AM_V_GEN)$(PERL) $(srcdir)/gen-testsuite-part \
+ --srcdir $(srcdir) > t/testsuite-part.tmp
+ $(AM_V_at)chmod a-w t/testsuite-part.tmp
+ $(AM_V_at)mv -f t/testsuite-part.tmp $@
+EXTRA_DIST += gen-testsuite-part
+
+# The dependecies declared here are not truly complete, but such
+# completeness would cause more issues than it would solve. See
+# automake bug#11347.
+$(generated_TESTS): $(srcdir)/gen-testsuite-part
+$(srcdir)/t/testsuite-part.am: $(srcdir)/gen-testsuite-part Makefile.am
+
+# Hand-written tests for stuff in 'contrib/'.
+include $(srcdir)/contrib/t/local.am
+TESTS += $(contrib_TESTS)
+EXTRA_DIST += $(contrib_TESTS)
+
+# Static dependencies valid for each test case (also further
+# extended later). Note that use 'noinst_' rather than 'check_'
+# as the prefix, because we really want them to be built by
+# "make all". This makes it easier to run the test cases by
+# hand after having simply configured and built the package.
+
+nodist_noinst_SCRIPTS = \
+ t/wrap/aclocal-$(APIVERSION) \
+ t/wrap/automake-$(APIVERSION)
+
+dist_noinst_DATA = \
+ t/ax/test-init.sh \
+ t/ax/test-lib.sh \
+ t/ax/am-test-lib.sh \
+ t/ax/tap-functions.sh
+
+# Few more static dependencies.
+t/distcheck-missing-m4.log: t/ax/distcheck-hook-m4.am
+t/distcheck-outdated-m4.log: t/ax/distcheck-hook-m4.am
+EXTRA_DIST += t/ax/distcheck-hook-m4.am
+
+t/ax/test-defs.sh: t/ax/test-defs.in Makefile
+ $(AM_V_at)rm -f $@ $@-t
+ $(AM_V_at)$(MKDIR_P) t/ax
+ $(AM_V_GEN)in=t/ax/test-defs.in \
+ && $(do_subst) <$(srcdir)/$$in >$@-t
+ $(generated_file_finalize)
+EXTRA_DIST += t/ax/test-defs.in
+CLEANFILES += t/ax/test-defs.sh
+nodist_noinst_DATA = t/ax/test-defs.sh
+
+## Will be updated soon.
+noinst_SCRIPTS =
+
+t/ax/shell-no-trail-bslash: t/ax/shell-no-trail-bslash.in Makefile
+ $(AM_V_at)rm -f $@ $@-t
+ $(AM_V_GEN)in=t/ax/shell-no-trail-bslash.in \
+ && $(MKDIR_P) t/ax \
+ && $(do_subst) <$(srcdir)/$$in >$@-t \
+ && chmod a+x $@-t
+ $(generated_file_finalize)
+EXTRA_DIST += t/ax/shell-no-trail-bslash.in
+CLEANFILES += t/ax/shell-no-trail-bslash
+noinst_SCRIPTS += t/ax/shell-no-trail-bslash
+
+runtest: runtest.in Makefile
+ $(AM_V_at)rm -f $@ $@-t
+ $(AM_V_GEN)in=runtest.in \
+ && $(MKDIR_P) t/ax \
+ && $(do_subst) <$(srcdir)/runtest.in >$@-t \
+ && chmod a+x $@-t
+ $(generated_file_finalize)
+EXTRA_DIST += runtest.in
+CLEANFILES += runtest
+noinst_SCRIPTS += runtest
+
+# If two test scripts have the same basename, they will end up sharing
+# the same log file, leading to all sort of undefined and undesired
+# behaviours.
+check-no-repeated-test-name:
+ @LC_ALL=C; export LC_ALL; \
+ lst='$(TEST_LOGS)'; for log in $$lst; do echo $$log; done \
+ | sort | uniq -c | awk '($$1 > 1) { print }' \
+ | sed 's/\.log$$//' | grep . >&2 \
+ && { \
+ echo $@: test names listed above are duplicated >&2; \
+ exit 1; \
+ }; :
+check-local: check-no-repeated-test-name
+.PHONY: check-no-repeated-test-name
+
+# Check that our test cases are syntactically correct.
+# See automake bug#11898.
+check-tests-syntax:
+ @st=0; \
+ err () { echo "$@: $$*" >&2; st=1; }; \
+## The user might do something like "make check TESTS=t/foo" or
+## "make check TESTS_LOGS=t/foo.log" and expect (say) the test
+## 't/foo.sh' to be run; this has worked well until today, and
+## we want to continue supporting this use case.
+ bases=`for log in : $(TEST_LOGS); do echo $$log; done \
+ | sed -e '/^:$$/d' -e 's/\.log$$//'`; \
+ for bas in $$bases; do \
+ for suf in sh tap pl; do \
+ tst=$$bas.$$suf; \
+## Emulate VPATH search.
+ if test -f $$tst; then \
+ break; \
+ elif test -f $(srcdir)/$$tst; then \
+ tst=$(srcdir)/$$tst; \
+ break; \
+ else \
+ tst=''; \
+ fi; \
+ done; \
+ test -n "$$tst" || err "couldn't find test '$$bas'"; \
+## Don't check that perl tests are valid shell scripts!
+ test $$suf = pl && continue; \
+ $(AM_V_P) && echo " $(AM_TEST_RUNNER_SHELL) -n $$tst"; \
+ $(AM_TEST_RUNNER_SHELL) -n "$$tst" \
+ || err "test '$$tst' syntactically invalid"; \
done; \
- test $$stat = 0 || \
- echo "See Fetchdir/update.patch for a log of the changes."; \
- exit $$stat
-.PHONY: fetch
-
-update_copyright_env = \
- UPDATE_COPYRIGHT_FORCE=1 \
- UPDATE_COPYRIGHT_USE_INTERVALS=2
-
-.PHONY: update-copyright
-update-copyright:
- $(AM_V_GEN)excluded_re=`echo $(FETCHFILES) \
- | sed -e 's|^|lib/|' -e 's| | lib/|g' -e 's, ,|,g'`; \
- $(GIT) ls-files \
- | grep -Ev '^(lib/)?(COPYING|INSTALL)$$' \
- | grep -Ev "^($$excluded_re)$$" \
- | $(update_copyright_env) xargs $(srcdir)/lib/$@
+ exit $$st
+check-local: check-tests-syntax
+.PHONY: check-tests-syntax
+
+# Recipes with a trailing backslash character (possibly followed by
+# blank characters only) can cause spurious syntax errors with at
+# least older bash versions (e.g., bash 2.05b), and can be potentially
+# be unportable to other weaker shells. Run the testsuite in a way
+# that helps catching such problems in Automake-generated recipes.
+# See automake bug#10436.
+check-no-trailing-backslash-in-recipes:
+ $(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) check \
+ CONFIG_SHELL='$(abs_top_builddir)/t/ax/shell-no-trail-bslash'
+.PHONY: check-no-trailing-backslash-in-recipes
+
+# Automake-generated Makefiles should work when run with parallel make.
+check-parallel:
+ $(AM_V_GEN)$(MAKE) $(AM_MAKEFLAGS) check \
+ AM_TESTSUITE_MAKE="$${AM_TESTSUITE_MAKE-$${MAKE-make}} -j4"
+.PHONY: check-parallel
+
+## Checking the list of tests.
+test_subdirs = t t/pm contrib/t
+include $(srcdir)/t/CheckListOfTests.am
+
+# Run the testsuite with the installed aclocal and automake.
+installcheck-local: installcheck-testsuite
+installcheck-testsuite:
+ am_running_installcheck=yes $(MAKE) $(AM_MAKEFLAGS) check
+
+# Performance tests.
+.PHONY: perf
+perf: all
+ $(MAKE) $(AM_MAKEFLAGS) TEST_SUITE_LOG='$(PERF_TEST_SUITE_LOG)' \
+ TESTS='$(perf_TESTS)' check
+PERF_TEST_SUITE_LOG = t/perf/test-suite.log
+CLEANFILES += $(PERF_TEST_SUITE_LOG)
+EXTRA_DIST += $(perf_TESTS)
+
+clean-local: clean-local-check
+.PHONY: clean-local-check
+clean-local-check:
+ $(AM_V_GEN)$(PERL) $(srcdir)/t/ax/deltree.pl t/*.dir t/*/*.dir */t/*.dir
+
+
+## ---------------- ##
+## Documentation. ##
+## ---------------- ##
+
+info_TEXINFOS = doc/automake.texi doc/automake-history.texi
+doc_automake_TEXINFOS = doc/fdl.texi
+doc_automake_history_TEXINFOS = doc/fdl.texi
+
+man1_MANS = \
+ doc/aclocal.1 \
+ doc/automake.1 \
+ doc/aclocal-$(APIVERSION).1 \
+ doc/automake-$(APIVERSION).1
+
+$(man1_MANS): $(srcdir)/configure.ac
+
+CLEANFILES += $(man1_MANS)
+EXTRA_DIST += doc/help2man
+
+update_mans = \
+ $(AM_V_GEN): \
+ && $(MKDIR_P) doc \
+ && $(extend_PATH) \
+ && $(PERL) $(srcdir)/doc/help2man --output=$@
+
+doc/aclocal.1 doc/automake.1:
+ $(AM_V_GEN): \
+ && $(MKDIR_P) doc \
+ && f=`echo $@ | sed 's|.*/||; s|\.1$$||; $(transform)'` \
+ && echo ".so man1/$$f-$(APIVERSION).1" > $@
+
+doc/aclocal-$(APIVERSION).1: aclocal.in aclocal lib/Automake/Config.pm
+ $(update_mans) aclocal-$(APIVERSION)
+doc/automake-$(APIVERSION).1: automake.in automake lib/Automake/Config.pm
+ $(update_mans) automake-$(APIVERSION)
+
+
+## ---------------------------- ##
+## Example package "amhello". ##
+## ---------------------------- ##
+
+amhello_sources = \
+ doc/amhello/configure.ac \
+ doc/amhello/Makefile.am \
+ doc/amhello/README \
+ doc/amhello/src/main.c \
+ doc/amhello/src/Makefile.am
+
+amhello_configury = \
+ aclocal.m4 \
+ autom4te.cache \
+ Makefile.in \
+ config.h.in \
+ configure \
+ depcomp \
+ install-sh \
+ missing \
+ src/Makefile.in
+
+dist_noinst_DATA += $(amhello_sources)
+dist_doc_DATA = $(srcdir)/doc/amhello-1.0.tar.gz
+
+setup_autotools_paths = { \
+ $(extend_PATH) \
+ && ACLOCAL=aclocal-$(APIVERSION) && export ACLOCAL \
+ && AUTOMAKE=automake-$(APIVERSION) && export AUTOMAKE \
+ && AUTOCONF='$(am_AUTOCONF)' && export AUTOCONF \
+ && AUTOM4TE='$(am_AUTOM4TE)' && export AUTOM4TE \
+ && AUTORECONF='$(am_AUTORECONF)' && export AUTORECONF \
+ && AUTOHEADER='$(am_AUTOHEADER)' && export AUTOHEADER \
+ && AUTOUPDATE='$(am_AUTOUPDATE)' && export AUTOUPDATE \
+ && true; \
+}
+
+# We depend on configure.ac so that we regenerate the tarball
+# whenever the Automake version changes.
+$(srcdir)/doc/amhello-1.0.tar.gz: $(amhello_sources) $(srcdir)/configure.ac
+ $(AM_V_GEN)tmp=amhello-output.tmp \
+ && $(am__cd) $(srcdir)/doc/amhello \
+ && : Make our aclocal and automake avaiable before system ones. \
+ && $(setup_autotools_paths) \
+ && ( \
+ { $(AM_V_P) || exec 5>&2 >$$tmp 2>&1; } \
+ && $(am_AUTORECONF) -vfi \
+ && ./configure \
+ && $(MAKE) $(AM_MAKEFLAGS) distcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) distclean \
+ || { \
+ if $(AM_V_P); then :; else \
+ echo "$@: recipe failed." >&5; \
+ echo "See file '`pwd`/$$tmp' for details" >&5; \
+ fi; \
+ exit 1; \
+ } \
+ ) \
+ && rm -rf $(amhello_configury) $$tmp \
+ && mv -f amhello-1.0.tar.gz ..
+
+
+## ------------------------------------------------- ##
+## Third-party, obsolescent or experimental stuff. ##
+## ------------------------------------------------- ##
+
+EXTRA_DIST += \
+ contrib/check-html.am \
+ contrib/multilib/README \
+ contrib/multilib/config-ml.in \
+ contrib/multilib/symlink-tree \
+ contrib/multilib/multilib.am \
+ contrib/multilib/multi.m4 \
+ contrib/README
+
+
+## --------------------------------------------------- ##
+## Older files, kept mostly for historical interest. ##
+## --------------------------------------------------- ##
+
+EXTRA_DIST += \
+ old/ChangeLog-tests \
+ old/ChangeLog.96 \
+ old/ChangeLog.98 \
+ old/ChangeLog.00 \
+ old/ChangeLog.01 \
+ old/ChangeLog.02 \
+ old/ChangeLog.03 \
+ old/ChangeLog.04 \
+ old/ChangeLog.09 \
+ old/ChangeLog.11 \
+ old/TODO