Blackfin: bf538f-ezkit: new board port

[platform/kernel/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 199a224..f70e1d9 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2008
+# (C) Copyright 2000-2009
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -24,7 +24,7 @@
 VERSION = 2009
 PATCHLEVEL = 03
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -222,7 +222,8 @@ LIBS += cpu/ixp/npe/libnpe.a
 endif
 LIBS += lib_$(ARCH)/lib$(ARCH).a
 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
-       fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a
+       fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
+       fs/ubifs/libubifs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
@@ -261,6 +262,7 @@ TAG_SUBDIRS += cpu/mpc8xxx
 endif
 LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
+LIBS += drivers/twserial/libtws.a
 LIBS += drivers/usb/libusb.a
 LIBS += drivers/video/libvideo.a
 LIBS += common/libcommon.a
@@ -2439,6 +2441,9 @@ MPC8555CDS_config:        unconfig
 MPC8568MDS_config:     unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
+MPC8569MDS_config:     unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
+
 MPC8572DS_36BIT_config \
 MPC8572DS_config:       unconfig
        @mkdir -p $(obj)include
@@ -2652,8 +2657,18 @@ at91cap9adk_config       :       unconfig
 at91sam9260ek_nandflash_config \
 at91sam9260ek_dataflash_cs0_config \
 at91sam9260ek_dataflash_cs1_config \
-at91sam9260ek_config   :       unconfig
-       @mkdir -p $(obj)include
+at91sam9260ek_config \
+at91sam9g20ek_nandflash_config \
+at91sam9g20ek_dataflash_cs0_config \
+at91sam9g20ek_dataflash_cs1_config \
+at91sam9g20ek_config   :       unconfig
+       @mkdir -p $(obj)include
+       @if [ "$(findstring 9g20,$@)" ] ; then \
+               echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
+               $(XECHO) "... 9G20 Variant" ; \
+       else \
+               echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
+       fi;
        @if [ "$(findstring _nandflash,$@)" ] ; then \
                echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
                $(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2681,7 +2696,7 @@ at91sam9xeek_config       :       unconfig
                echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
                $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
        fi;
-       @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+       @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
@@ -2932,7 +2947,7 @@ modnet50_config : unconfig
        @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
 
 evb4510_config :       unconfig
-       @$(MKCONFIG) $(@:_config=) arm arm720t evb4510
+       @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
 
 lpc2292sodimm_config:  unconfig
        @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
@@ -3321,7 +3336,8 @@ suzaku_config:    unconfig
 #========================================================================
 
 # Analog Devices boards
-BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit
+BFIN_BOARDS = bf527-ezkit bf533-ezkit bf533-stamp bf537-stamp bf538f-ezkit \
+       bf548-ezkit bf561-ezkit
 
 $(BFIN_BOARDS:%=%_config)      : unconfig
        @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
@@ -3495,7 +3511,8 @@ clean:
               $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
               $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
               $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
-              $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
+              $(obj)board/bf5{27,33,38f,48,61}-ezkit/u-boot.lds          \
+              $(obj)board/bf5{33,37}-stamp/u-boot.lds                    \
               $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
        @rm -f $(obj)include/bmp_logo.h
        @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}