#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2005
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
ifeq (include/config.mk,$(wildcard include/config.mk))
# load ARCH, BOARD, and CPU configuration
include include/config.mk
-export ARCH CPU BOARD VENDOR
+export ARCH CPU BOARD VENDOR SOC
# load other configuration
include $(TOPDIR)/config.mk
ifeq ($(ARCH),nios)
CROSS_COMPILE = nios-elf-
endif
+ifeq ($(ARCH),nios2)
+CROSS_COMPILE = nios2-elf-
+endif
ifeq ($(ARCH),m68k)
CROSS_COMPILE = m68k-elf-
endif
LIBS = lib_generic/libgeneric.a
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
+ifdef SOC
+LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
+endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
.PHONY : $(LIBS)
# Add GCC lib
-PLATFORM_LIBS += --no-warn-mismatch -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
# The "tools" are needed early, so put this first
all: $(ALL)
+u-boot.hex: u-boot
+ $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
+
u-boot.srec: u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) $(PLATFORM_LIBS) --end-group \
+ --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(LIBS):
etags:
etags -a `find $(SUBDIRS) include \
+ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
+ net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
System.map: u-boot
## MPC5xx Systems
#########################################################################
+canmb_config: unconfig
+ @./mkconfig -a canmb ppc mpc5xxx canmb
+
cmi_mpc5xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc5xx cmi
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
-MINI5200_config \
-EVAL5200_config \
-TOP5200_config: unconfig
- @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
- @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+inka4x0_config: unconfig
+ @./mkconfig inka4x0 ppc mpc5xxx inka4x0
PM520_config \
PM520_DDR_config \
}
@./mkconfig -a PM520 ppc mpc5xxx pm520
+MINI5200_config \
+EVAL5200_config \
+TOP5200_config: unconfig
+ @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
+ @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+
+Total5100_config \
+Total5200_config \
+Total5200_lowboot_config \
+Total5200_Rev2_config \
+Total5200_Rev2_lowboot_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring 5100,$@)" ] || \
+ { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ echo "... with MGT5100 processor" ; \
+ }
+ @[ -z "$(findstring 5200,$@)" ] || \
+ { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ echo "... with MPC5200 processor" ; \
+ }
+ @[ -n "$(findstring Rev,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
+ echo "... revision 1 board" ; \
+ }
+ @[ -z "$(findstring Rev2_,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
+ echo "... revision 2 board" ; \
+ }
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
+ @./mkconfig -a Total5200 ppc mpc5xxx total5200
+
+TQM5200_auto_config \
+TQM5200_AA_config \
+TQM5200_AB_config \
+TQM5200_AC_config \
+MiniFAP_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring MiniFAP,$@)" ] || \
+ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
+ echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
+ echo "... TQM5200_AC on MiniFAP" ; \
+ }
+ @[ -z "$(findstring AA,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \
+ echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
+ }
+ @[ -z "$(findstring AB,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \
+ echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
+ echo "... with Graphics Controller"; \
+ }
+ @[ -z "$(findstring AC,$@)" ] || \
+ { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
+ echo "... with 4 MB Flash, 128 MB SDRAM" ; \
+ echo "... with Graphics Controller"; \
+ }
+ @[ -z "$(findstring auto,$@)" ] || \
+ { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \
+ echo "... with automatic CS configuration" ; \
+ }
+ @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
+
#########################################################################
## MPC8xx Systems
#########################################################################
}
@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+NC650_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx nc650
+
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
QS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+quantum_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx quantum
+
R360MPI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
@./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+uc100_config : unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx uc100
+
v37_config: unconfig
@echo "#define CONFIG_LCD" >include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
ADCIOP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
+APC405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
+
AR405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
CANBT_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
-CATcenter_config: unconfig
+CATcenter_config \
+CATcenter_25_config \
+CATcenter_33_config: unconfig
@ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h
@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
+ @[ -z "$(findstring _25,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ echo "SysClk = 25MHz" ; \
+ }
+ @[ -z "$(findstring _33,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ echo "SysClk = 33MHz" ; \
+ }
@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
CPCI405_config \
CPCI4052_config \
+CPCI405DT_config \
CPCI405AB_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk
EXBITGEN_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
+G2000_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx g2000
+
+HH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
+
HUB405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
PMC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
PPChameleonEVB_HI_25_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
@ >include/config.h
- @[ -z "$(findstring _MODEL_BA,$@)" ] || \
+ @[ -z "$(findstring EVB_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
echo "... BASIC model" ; \
}
- @[ -z "$(findstring _MODEL_ME,$@)" ] || \
+ @[ -z "$(findstring EVB_ME,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
echo "... MEDIUM model" ; \
}
- @[ -z "$(findstring _MODEL_HI,$@)" ] || \
+ @[ -z "$(findstring EVB_HI,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
echo "... HIGH-END model" ; \
}
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
- echo " SysClk = 25MHz" ; \
+ echo "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
- echo " SysClk = 33MHz" ; \
+ echo "SysClk = 33MHz" ; \
}
@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+sbc405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx sbc405
+
VOH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
+VOM405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+
W7OLMC_config \
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
WALNUT405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+WUH405_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
+
XPEDITE1K_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
#########################################################################
+## MPC8220 Systems
+#########################################################################
+Alaska8220_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 alaska
+
+sorcery_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 sorcery
+
+Yukon8220_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8220 yukon
+
+#########################################################################
## MPC824x Systems
#########################################################################
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
eXalion_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x eXalion
+HIDDEN_DRAGON_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+
MOUSSE_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x mousse
Sandpoint8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sandpoint
+sbc8240_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x sbc8240
+
SL8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x utx8245
+cobra5272_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
#########################################################################
## MPC8260 Systems
#########################################################################
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
+CPU87_config \
+CPU87_ROMBOOT_config: unconfig
+ @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @cd ./include ; \
+ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+ echo "... booting from 8-bit flash" ; \
+ else \
+ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+ echo "... booting from 64-bit flash" ; \
+ fi; \
+ echo "export CONFIG_BOOT_ROM" >> config.mk;
+
ep8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ep8260
@./mkconfig -a ISPAN ppc mpc8260 ispan
MPC8260ADS_config \
+MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
+MPC8260ADS_33MHz_lowboot_config \
MPC8260ADS_40MHz_config \
+MPC8260ADS_40MHz_lowboot_config \
MPC8272ADS_config \
+MPC8272ADS_lowboot_config \
PQ2FADS_config \
+PQ2FADS_lowboot_config \
PQ2FADS-VR_config \
+PQ2FADS-VR_lowboot_config \
PQ2FADS-ZU_config \
+PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
+PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
$(if $(findstring PQ2FADS,$@), \
@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
@./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
ppmc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
+Rattler8248_config \
+Rattler_config: unconfig
+ $(if $(findstring 8248,$@), \
+ @echo "#define CONFIG_MPC8248" > include/config.h)
+ @./mkconfig -a Rattler ppc mpc8260 rattler
+
RPXsuper_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
M5282EVB_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
+TASREG_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+
#########################################################################
## MPC85xx Systems
#########################################################################
MPC8560ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
+MPC8541CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+
+MPC8555CDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
+
+PM854_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx pm854
+
+sbc8540_config \
+sbc8540_33_config \
+sbc8540_66_config: unconfig
+ @if [ "$(findstring _66_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "... 66 MHz PCI" ; \
+ else \
+ >include/config.h ; \
+ echo "... 33 MHz PCI" ; \
+ fi
+ @./mkconfig -a SBC8540 ppc mpc85xx sbc8560
+
+sbc8560_config \
+sbc8560_33_config \
+sbc8560_66_config: unconfig
+ @if [ "$(findstring _66_,$@)" ] ; then \
+ echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "... 66 MHz PCI" ; \
+ else \
+ >include/config.h ; \
+ echo "... 33 MHz PCI" ; \
+ fi
+ @./mkconfig -a sbc8560 ppc mpc85xx sbc8560
+
stxgp3_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+TQM8540_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+
+TQM8560_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx tqm8560
+
#########################################################################
## 74xx/7xx Systems
#########################################################################
BAB7xx_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+CPCI750_config: unconfig
+ @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
+
DB64360_config: unconfig
@./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
-integratorcp_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorcp
+at91rm9200dk_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+
+cmc_pu2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
integratorap_config : unconfig
@./mkconfig $(@:_config=) arm arm926ejs integratorap
+integratorcp_config : unconfig
+ @./mkconfig $(@:_config=) arm arm926ejs integratorcp
+
lpd7a400_config \
lpd7a404_config: unconfig
@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+mx1ads_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
+
+mx1fs2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
+
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
fi;
@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+scb9328_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
+
smdk2400_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2400
+ @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2410
+ @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
SX1_config : unconfig
@./mkconfig $(@:_config=) arm arm925t sx1
echo "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
}
- @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
+ @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t vcma9 mpl
+ @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
versatile_config : unconfig
@./mkconfig $(@:_config=) arm arm926ejs versatile
+voiceblue_smallflash_config \
+voiceblue_config: unconfig
+ @if [ "$(findstring _smallflash_,$@)" ] ; then \
+ echo "... boot from lower flash bank" ; \
+ echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+ else \
+ echo "... boot from upper flash bank" ; \
+ >include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+ fi
+ @./mkconfig -a voiceblue arm arm925t voiceblue
+
#########################################################################
## S3C44B0 Systems
#########################################################################
@./mkconfig $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
-## MC9328 (Dragonball) Systems
-#########################################################################
-
-mx1ads_config : unconfig
- @./mkconfig $(@:_config=) arm mc9328 mx1ads
-
-#########################################################################
## ARM720T Systems
#########################################################################
@./mkconfig $(@:_config=) arm arm720t evb4510
#########################################################################
-## AT91RM9200 Systems
+## XScale Systems
#########################################################################
-at91rm9200dk_config : unconfig
- @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
+adsvix_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa adsvix
-#########################################################################
-## XScale Systems
-#########################################################################
+cerf250_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa cerf250
cradle_config : unconfig
@./mkconfig $(@:_config=) arm pxa cradle
wepep250_config : unconfig
@./mkconfig $(@:_config=) arm pxa wepep250
+xaeniax_config : unconfig
+ @./mkconfig $(@:_config=) arm pxa xaeniax
+
xm250_config : unconfig
@./mkconfig $(@:_config=) arm pxa xm250
xsengine_config : unconfig
@./mkconfig $(@:_config=) arm pxa xsengine
+#########################################################################
+## ARM1136 Systems
+#########################################################################
+omap2420h4_config : unconfig
+ @./mkconfig $(@:_config=) arm arm1136 omap2420h4
+
#========================================================================
# i386
#========================================================================
@echo "#define CONFIG_DBAU1500 1" >>include/config.h
@./mkconfig -a dbau1x00 mips mips dbau1x00
+dbau1550_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1550_el_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00 "" little
+
#########################################################################
## MIPS64 5Kc
#########################################################################
}
@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
+#########################################################################
+## Nios-II
+#########################################################################
+
+PK1C20_config : unconfig
+ @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent
+
+PCI5441_config : unconfig
+ @./mkconfig PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
# MicroBlaze
examples/eepro100_eeprom examples/sched \
examples/mem_to_mem_idma2intr examples/82559_eeprom
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
- rm -f tools/mpc86x_clk
+ rm -f tools/mpc86x_clk tools/ncb
rm -f tools/easylogo/easylogo tools/bmp_logo
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
| xargs -0 rm -f
rm -f $(OBJS) *.bak tags TAGS
rm -fr *.*~
- rm -f u-boot u-boot.map $(ALL)
+ rm -f u-boot u-boot.map u-boot.hex $(ALL)
rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
rm -f include/asm/proc include/asm/arch include/asm