# SPDX-License-Identifier: GPL-2.0+
VERSION = 2019
-PATCHLEVEL = 04
+PATCHLEVEL = 07
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc3
NAME =
# *DOCUMENTATION*
# KBUILD_MODULES := 1
#endif
+define size_check
+ actual=$$( wc -c $1 | awk '{print $$1}'); \
+ limit=$$( printf "%d" $2 ); \
+ if test $$actual -gt $$limit; then \
+ echo "$1 exceeds file size limit:" >&2; \
+ echo " limit: $$limit bytes" >&2; \
+ echo " actual: $$actual bytes" >&2; \
+ echo " excess: $$((actual - limit)) bytes" >&2; \
+ exit 1; \
+ fi
+endef
+export size_check
+
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
-libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
+libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/
#########################################################################
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
-BOARD_SIZE_CHECK = \
- @actual=`wc -c $@ | awk '{print $$1}'`; \
- limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
- if test $$actual -gt $$limit; then \
- echo "$@ exceeds file size limit:" >&2 ; \
- echo " limit: $$limit bytes" >&2 ; \
- echo " actual: $$actual bytes" >&2 ; \
- echo " excess: $$((actual - limit)) bytes" >&2; \
- exit 1; \
- fi
+BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
else
BOARD_SIZE_CHECK =
endif
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_SPL_SIZE_LIMIT))
+else
+SPL_SIZE_CHECK =
+endif
+
# Statically apply RELA-style relocations (currently arm64 only)
# This is useful for arm64 where static relocation needs to be performed on
# the raw binary, but certain simulators only accept an ELF file (but don't
@echo >&2 "===================================================="
endif
endif
-ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
-ifneq ($(CONFIG_DM_SCSI),y)
+ifeq ($(CONFIG_MVSATA_IDE),y)
@echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
- @echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+ @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
+ @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
+ @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
+ @echo >&2 "release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_LIBATA),y)
+ifneq ($(CONFIG_AHCI),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
+ @echo >&2 "enabled. Please update the storage controller driver to use"
+ @echo >&2 "CONFIG_AHCI before the v2019.07 release."
@echo >&2 "Failure to update by the deadline may result in board removal."
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
@echo >&2 "===================================================="
@echo >&2 "===================================================="
endif
endif
+ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
+ifneq ($(CONFIG_WDT),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
+ @echo >&2 "Please update the board to use CONFIG_WDT before the"
+ @echo >&2 "v2019.10 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
@# options are whitelisted, so new ones should not be added.
ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+ @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+ @lzop -f9 $< > $@
+
fit-dtb.blob: dts/dt.dtb FORCE
$(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+ touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
+ chmod 0600 fit-dtb.blob
+endif
MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-a 0 -e 0 -E \
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
-u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
+ifneq ($(EXT_DTB),)
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
+ $(call if_changed,cat)
+else
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
$(call if_changed,cat)
+endif
u-boot.bin: u-boot-fit-dtb.bin FORCE
$(call if_changed,copy)
%.imx: %.bin
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ $(BOARD_SIZE_CHECK)
%.vyb: %.imx
$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
spl/u-boot-spl.srec: spl/u-boot-spl FORCE
$(call if_changed,objcopy)
+%.scif: %.srec
+ $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
+
OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+ $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
$(call if_changed,binman)
spl/u-boot-spl.bin: spl/u-boot-spl
@:
+ $(SPL_SIZE_CHECK)
+
spl/u-boot-spl: tools prepare \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
- boot* u-boot* MLO* SPL System.map fit-dtb.blob
+ boot* u-boot* MLO* SPL System.map fit-dtb.blob*
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include/generated spl tpl \
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+quiet_cmd_genenv = GENENV $@
+cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
+ sed --in-place -e 's/\x00/\x0A/g' $@
+
+u-boot-initial-env: u-boot.bin
+ $(call if_changed,genenv)
+
# Consistency checks
# ---------------------------------------------------------------------------