else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
+TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
-export HOSTARCH HOSTOS
+# Set shell to bash if possible, otherwise fall back to sh
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+ else if [ -x /bin/bash ]; then echo /bin/bash; \
+ else echo sh; fi; fi)
+
+export HOSTARCH HOSTOS SHELL
# Deal with colliding definitions from tcsh etc.
VENDOR=
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
+LIBS += drivers/fpga/libfpga.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/phy/libphy.a
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
LIBS += cpu/mpc8xxx/ddr/libddr.a
+TAG_SUBDIRS += cpu/mpc8xxx
endif
ifeq ($(CPU),mpc86xx)
LIBS += cpu/mpc8xxx/ddr/libddr.a
+TAG_SUBDIRS += cpu/mpc8xxx
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += post/libpost.a
LIBS := $(addprefix $(obj),$(LIBS))
-.PHONY : $(LIBS) $(VERSION_FILE)
+.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
$(LDSCRIPT): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $@) $(notdir $@)
-$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk
+$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
-$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk
+$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
- '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
- ) > $@.tmp
+ '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
+$(TIMESTAMP_FILE):
+ @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+ @date +'#define U_BOOT_TIME "%T"' >> $@
+
gdbtools:
$(MAKE) -C tools/gdb all || exit 1
env:
$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
-depend dep: $(VERSION_FILE)
+depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE)
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS += include
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
+$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
CANBT_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
-# Canyonlands & Glacier use different U-Boot images
+# Arches, Canyonlands & Glacier use different U-Boot images
+arches_config \
canyonlands_config \
glacier_config: unconfig
@mkdir -p $(obj)include
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
-CPCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-
+CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
- @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
CPCIISER4_config: unconfig
EXBITGEN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
+fx12mm_flash_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+ @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
+ @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+ > $(obj)board/avnet/fx12mm/config.tmp
+ @echo "TEXT_BASE := 0xFFCB0000" \
+ >> $(obj)board/avnet/fx12mm/config.tmp
+ @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+
+fx12mm_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+ @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
+ @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+ > $(obj)board/avnet/fx12mm/config.tmp
+ @echo "TEXT_BASE := 0x03000000" \
+ >> $(obj)board/avnet/fx12mm/config.tmp
+ @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+
G2000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
>> $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+neo_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
+
ocotea_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
WUH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
+xilinx-ppc405-generic_flash_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+ @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+ > $(obj)board/xilinx/ppc405-generic/config.tmp
+ @echo "TEXT_BASE := 0xFE360000" \
+ >> $(obj)board/xilinx/ppc405-generic/config.tmp
+ @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
+xilinx-ppc405-generic_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+ @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+ > $(obj)board/xilinx/ppc405-generic/config.tmp
+ @echo "TEXT_BASE := 0x04000000" \
+ >> $(obj)board/xilinx/ppc405-generic/config.tmp
+ @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
xilinx-ppc440-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
ISPAN_REVB_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
- echo "#define CFG_REV_B" > $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
mgcoge_config : unconfig
- @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
+ @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
- @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
- @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
+ @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
+ @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
## Coldfire
#########################################################################
-M52277EVB_config: unconfig
+M52277EVB_config \
+M52277EVB_spansion_config \
+M52277EVB_stmicro_config : unconfig
+ @case "$@" in \
+ M52277EVB_config) FLASH=SPANSION;; \
+ M52277EVB_spansion_config) FLASH=SPANSION;; \
+ M52277EVB_stmicro_config) FLASH=STMICRO;; \
+ esac; \
+ if [ "$${FLASH}" = "SPANSION" ] ; then \
+ echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+ cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
+ $(XECHO) "... with SPANSION boot..." ; \
+ fi; \
+ if [ "$${FLASH}" = "STMICRO" ] ; then \
+ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+ cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
+ $(XECHO) "... with ST Micro boot..." ; \
+ fi
@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5282EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
+M53017EVB_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "SPANSION" ] ; then \
- echo "#define CFG_SPANSION_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
$(XECHO) "... with SPANSION boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
$(XECHO) "... with ST Micro boot..." ; \
fi; \
- echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
+ echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
@$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
- echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with INTEL boot..." ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
- echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ATMEL boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ST Micro boot..." ; \
fi; \
- echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
$(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
- echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
- echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
- echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
- echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
- echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
- echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
- echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
- echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
- echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
- echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
- echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
- echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
- echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
- echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
@mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
- echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
- echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
$(XECHO) -n "...NAND..." ; \
MPC8610HPCD_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+MPC8641HPCN_36BIT_config \
MPC8641HPCN_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _36BIT_,$@)" ] ; then \
+ echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+ $(XECHO) "... enabling 36-bit physical addressing." ; \
+ fi
+ @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
sbc8641d_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-at91sam9261ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
-
-at91sam9263ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
-
-at91sam9rlek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
-
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
## Atmel ARM926EJ-S Systems
#########################################################################
+afeb9260_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
+
at91cap9adk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
+at91sam9260ek_nandflash_config \
+at91sam9260ek_dataflash_cs0_config \
+at91sam9260ek_dataflash_cs1_config \
at91sam9260ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
+at91sam9261ek_nandflash_config \
+at91sam9261ek_dataflash_cs0_config \
+at91sam9261ek_dataflash_cs3_config \
+at91sam9261ek_config : unconfig
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+
+at91sam9263ek_nandflash_config \
+at91sam9263ek_dataflash_config \
+at91sam9263ek_dataflash_cs0_config \
+at91sam9263ek_config : unconfig
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+
+at91sam9rlek_nandflash_config \
+at91sam9rlek_dataflash_config \
+at91sam9rlek_dataflash_cs0_config \
+at91sam9rlek_config : unconfig
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
-xupv2p_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
-
#========================================================================
# Blackfin
#========================================================================
rsk7203_config: unconfig
@ >include/config.h
@echo "#define CONFIG_RSK7203 1" >> include/config.h
- @./mkconfig -a $(@:_config=) sh sh2 rsk7203
+ @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
#########################################################################
## sh3 (Renesas SuperH)
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 MigoR
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
ms7750se_config: unconfig
@mkdir -p $(obj)include
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
sh7785lcr_config : unconfig
@ >include/config.h
@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
#========================================================================
# SPARC
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
- @rm -f $(obj)api_examples/demo $(VERSION_FILE)
+ @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \