# load other configuration
include $(TOPDIR)/config.mk
+# Targets which don't build the source code
+NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+
+# Only do the generic board check when actually building, not configuring
+ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
+ifeq ($(findstring _config,$(MAKECMDGOALS)),)
+$(CHECK_GENERIC_BOARD)
+endif
+endif
+
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
$(obj)u-boot.ais
-# Specify the target for use in elftosb call
-ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
-ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
- -o $(obj)u-boot.sb
+ $(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
ifneq ($(CONFIG_TEGRA),)
-ifeq ($(CONFIG_OF_SEPARATE),y)
-nodtb=dtb
-dtbfile=$(obj)u-boot.dtb
-else
-nodtb=nodtb
-dtbfile=
-endif
-
-$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
+$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
+
+ifeq ($(CONFIG_OF_SEPARATE),y)
+$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb
+ cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@
+endif
endif
$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+# PPC4xx needs the SPL at the end of the image, since the reset vector
+# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
+# and need to introduce a new build target with the full blown U-Boot
+# at the start padded up to the start of the SPL image. And then concat
+# the SPL image to the end.
+$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
+ of=$(obj)u-boot-pad.img 2>/dev/null
+ dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
+ conv=notrunc 2>/dev/null
+ cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
+ @rm -f $(obj)u-boot.bd
@rm -f $(obj)u-boot.spr
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}