# SPDX-License-Identifier: GPL-2.0+
VERSION = 2019
-PATCHLEVEL = 01
+PATCHLEVEL = 04
SUBLEVEL =
-EXTRAVERSION = -rc3
+EXTRAVERSION =
NAME =
# *DOCUMENTATION*
os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+ $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
+
# Snow Leopards build environment has no longer restrictions as described above
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
# in some host tools which is a problem then ... so disable ASLR for these
# tools
HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
+
+# macOS Mojave (10.14.X)
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
endif
# Decide whether to build built-in, modular, or both.
@# Otherwise, 'make silentoldconfig' would be invoked twice.
$(Q)touch include/config/auto.conf
-u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
-include include/autoconf.mk
libs-y += drivers/usb/common/
libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
libs-y += drivers/usb/host/
libs-y += drivers/usb/musb/
libs-y += drivers/usb/musb-new/
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ -p $(CONFIG_FIT_EXTERNAL_OFFSET)\
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_cat = CAT $@
cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
$(srctree)/scripts/config_whitelist.txt $(srctree)
-all: $(ALL-y) cfg
+all: $(ALL-y)
ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
@echo >&2 "===================== WARNING ======================"
@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
@echo >&2 "===================================================="
endif
endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+ @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
ifeq ($(CONFIG_OF_EMBED),y)
@echo >&2 "===================== WARNING ======================"
@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
else
ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
U_BOOT_ITS_DEPS += u-boot
endif
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
$(call if_changed,mkimage)
+ $(BOARD_SIZE_CHECK)
+
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
$(call if_changed,mkfitimage)
SPL: spl/u-boot-spl.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
-ifeq ($(CONFIG_ARCH_IMX8M), y)
+ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
endif
endif
# prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile cfg
prepare1: prepare2 $(version_h) $(timestamp_h) \
include/config/auto.conf
MRPROPER_DIRS += include/config include/generated spl tpl \
.tmp_objdiff
MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
- ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+ ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ drivers/video/fonts/*.S
# clean - Delete most, but leave enough to build external modules
#
-o -name '.*.rej' -o -name '*%' -o -name 'core' \
-o -name '*.pyc' \) \
-type f -print | xargs rm -f
- @rm -f boards.cfg
+ @rm -f boards.cfg CHANGELOG
backup:
F=`basename $(srctree)` ; cd .. ; \