# MA 02111-1307 USA
#
-VERSION = 2008
-PATCHLEVEL = 10
+VERSION = 2009
+PATCHLEVEL = 01
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
OBJS += cpu/$(CPU)/start16.o
-OBJS += cpu/$(CPU)/reset.o
+OBJS += cpu/$(CPU)/resetvec.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
$(OBJS): depend $(obj)include/autoconf.mk
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-$(LIBS): depend $(obj)include/autoconf.mk
+$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk
TAG_SUBDIRS += common
TAG_SUBDIRS += drivers/bios_emulator
TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
TAG_SUBDIRS += drivers/hwmon
TAG_SUBDIRS += drivers/i2c
TAG_SUBDIRS += drivers/input
## MPC83xx Systems
#########################################################################
+kmeter1_config: unconfig
+ @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
+SIMPC8313_LP_config \
+SIMPC8313_SP_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/sheldon/simpc8313
+ @if [ "$(findstring _LP_,$@)" ] ; then \
+ $(XECHO) -n "...Large Page NAND..." ; \
+ echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _SP_,$@)" ] ; then \
+ $(XECHO) -n "...Small Page NAND..." ; \
+ echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
+MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _36BIT_,$@)" ] ; then \
+ echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+ $(XECHO) "... enabling 36-bit physical addressing." ; \
+ fi
+ @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
+XPEDITE5200_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+
#########################################################################
## MPC86xx Systems
#########################################################################
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
at91sam9260ek_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
fi;
@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+ fi;
+ @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
at91sam9261ek_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
at91sam9263ek_dataflash_config \
at91sam9263ek_dataflash_cs0_config \
at91sam9263ek_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
at91sam9rlek_dataflash_config \
at91sam9rlek_dataflash_cs0_config \
at91sam9rlek_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
- @board/integratorap/split_by_variant.sh $@
+ @board/armltd/integratorap/split_by_variant.sh $@
integratorcp_config \
cp_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
- @board/integratorcp/split_by_variant.sh $@
+ @board/armltd/integratorcp/split_by_variant.sh $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
netstar_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
+nmdk8815_config \
+nmdk8815_onenand_config: unconfig
+ @mkdir -p $(obj)include
+ @ > $(obj)include/config.h
+ @if [ "$(findstring _onenand, $@)" ] ; then \
+ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
+ $(XECHO) "... configured for OneNand Flash"; \
+ else \
+ $(XECHO) "... configured for Nand Flash"; \
+ fi
+ @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik
+
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
smdk2410_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
-SX1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t sx1
+SX1_stdout_serial_config \
+SX1_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
+ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout serial"; \
+ else \
+ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout usbtty"; \
+ fi;
+ @$(MKCONFIG) SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
versatile_config \
versatileab_config \
versatilepb_config : unconfig
- @board/versatile/split_by_variant.sh $@
+ @board/armltd/versatile/split_by_variant.sh $@
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
#########################################################################
+## ARM CORTEX Systems
+#########################################################################
+
+omap3_beagle_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
+
+omap3_overo_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
+
+omap3_evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
+
+omap3_pandora_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
+
+omap3_zoom1_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3
+
+#########################################################################
## XScale Systems
#########################################################################
#########################################################################
## AMD SC520 CDP
#########################################################################
+eNET_config : unconfig
+ @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
+
sc520_cdp_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
sc520_spunk_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
sc520_spunk_rel_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
#========================================================================
# MIPS
## Microblaze
#========================================================================
-ml401_config: unconfig
+microblaze-generic_config: unconfig
@mkdir -p $(obj)include
- @echo "#define CONFIG_ML401 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
suzaku_config: unconfig
@mkdir -p $(obj)include
## sh2 (Renesas SuperH)
#########################################################################
rsk7203_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_RSK7203 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
#########################################################################