Merge git://www.denx.de/git/u-boot

[platform/kernel/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 4a0e9f5..980aac2 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -206,6 +206,7 @@ LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
 LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/nand/libnand.a
 LIBS += drivers/nand_legacy/libnand_legacy.a
 LIBS += drivers/net/libnetdrv.a
@@ -431,7 +432,7 @@ jupiter_config:         unconfig
        @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 
 v38b_config: unconfig
-       @./mkconfig -a v38b ppc mpc5xxx v38b
+       @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 
 inka4x0_config:        unconfig
        @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
@@ -534,13 +535,8 @@ PM520_ROMBOOT_DDR_config:  unconfig
 smmaco4_config: unconfig
        @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
 
-cm1_qp1_config:        unconfig
-       @ >include/config.h
-       @[ -z "$(findstring cm1_qp1,$@)" ] || \
-               {  echo "... with 64 MByte SDRAM" ; \
-                 echo "... with 32 MByte Flash" ; \
-               }
-       @./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1
+cm5200_config: unconfig
+       @./mkconfig -a cm5200 ppc mpc5xxx cm5200
 
 spieval_config:        unconfig
        @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
@@ -1037,9 +1033,8 @@ acadia_config:    unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
 
 acadia_nand_config:    unconfig
-       @mkdir -p $(obj)include
-       @mkdir -p $(obj)nand_spl
-       @mkdir -p $(obj)board/amcc/acadia
+       @mkdir -p $(obj)include $(obj)board/amcc/acadia
+       @mkdir -p $(obj)nand_spl/board/amcc/acadia
        @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
        @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
        @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@@ -1049,7 +1044,7 @@ ADCIOP_config:    unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
 alpr_config:   unconfig
-       @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
 
 AP1000_config:unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@@ -1067,9 +1062,8 @@ bamboo_config:    unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
 
 bamboo_nand_config:    unconfig
-       @mkdir -p $(obj)include
-       @mkdir -p $(obj)nand_spl
-       @mkdir -p $(obj)board/amcc/bamboo
+       @mkdir -p $(obj)include $(obj)board/amcc/bamboo
+       @mkdir -p $(obj)nand_spl/board/amcc/bamboo
        @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
        @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
        @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@@ -1250,9 +1244,8 @@ rainier_config: unconfig
 
 sequoia_nand_config \
 rainier_nand_config: unconfig
-       @mkdir -p $(obj)include
-       @mkdir -p $(obj)nand_spl
-       @mkdir -p $(obj)board/amcc/sequoia
+       @mkdir -p $(obj)include $(obj)board/amcc/sequoia
+       @mkdir -p $(obj)nand_spl/board/amcc/sequoia
        @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
        @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
                tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@@ -1261,7 +1254,7 @@ rainier_nand_config: unconfig
        @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sc3_config:unconfig
-       @./mkconfig $(@:_config=) ppc ppc4xx sc3
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 
 taishan_config:        unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
@@ -1427,7 +1420,7 @@ ep8260_config:    unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
 
 ep82xxm_config:        unconfig
-       @./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
+       @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
 
 gw8260_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
@@ -1668,14 +1661,15 @@ r5200_config :          unconfig
 
 MPC8313ERDB_33_config \
 MPC8313ERDB_66_config: unconfig
-       @echo "" >include/config.h ; \
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _33_,$@)" ] ; then \
-               echo -n "...33M ..." ; \
-               echo "#define CFG_33MHZ" >>include/config.h ; \
+               echo "...33M ..." ; \
+               echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _66_,$@)" ] ; then \
-               echo -n "...66M..." ; \
-               echo "#define CFG_66MHZ" >>include/config.h ; \
+               echo "...66M..." ; \
+               echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
        fi ;
        @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
 
@@ -1683,23 +1677,24 @@ MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
 MPC832XEMDS_SLAVE_config:      unconfig
-       @echo "" >include/config.h ; \
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _HOST_,$@)" ] ; then \
-               echo -n "... PCI HOST " ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
+               echo "... PCI HOST " ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _SLAVE_,$@)" ] ; then \
                echo "...PCI SLAVE 66M"  ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
-               echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _33_,$@)" ] ; then \
-               echo -n "...33M ..." ; \
-               echo "#define PCI_33M" >>include/config.h ; \
+               echo "...33M ..." ; \
+               echo "#define PCI_33M" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _66_,$@)" ] ; then \
-               echo -n "...66M..." ; \
-               echo "#define PCI_66M" >>include/config.h ; \
+               echo "...66M..." ; \
+               echo "#define PCI_66M" >>$(obj)include/config.h ; \
        fi ;
        @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
 
@@ -1724,23 +1719,24 @@ MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
 MPC8360EMDS_SLAVE_config:      unconfig
-       @echo "" >include/config.h ; \
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _HOST_,$@)" ] ; then \
-               echo -n "... PCI HOST " ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
+               echo "... PCI HOST " ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _SLAVE_,$@)" ] ; then \
                echo "...PCI SLAVE 66M"  ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
-               echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _33_,$@)" ] ; then \
-               echo -n "...33M ..." ; \
-               echo "#define PCI_33M" >>include/config.h ; \
+               echo "...33M ..." ; \
+               echo "#define PCI_33M" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _66_,$@)" ] ; then \
-               echo -n "...66M..." ; \
-               echo "#define PCI_66M" >>include/config.h ; \
+               echo "...66M..." ; \
+               echo "#define PCI_66M" >>$(obj)include/config.h ; \
        fi ;
        @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
 
@@ -1766,10 +1762,10 @@ MPC8540EVAL_66_slave_config:      unconfig
        @mkdir -p $(obj)include
        @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _33_,$@)" ] ; then \
-               echo -n "... 33 MHz PCI" ; \
+               echo "... 33 MHz PCI" ; \
        else \
                echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-               echo -n "... 66 MHz PCI" ; \
+               echo "... 66 MHz PCI" ; \
        fi ; \
        if [ "$(findstring _slave_,$@)" ] ; then \
                echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
@@ -1863,7 +1859,7 @@ TQM8560_config:           unconfig
 #########################################################################
 
 MPC8641HPCN_config:    unconfig
-       @./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
+       @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn
 
 
 #########################################################################
@@ -2030,13 +2026,13 @@ omap1610h2_cs3boot_config \
 omap1610h2_cs_autoboot_config: unconfig
        @mkdir -p $(obj)include
        @if [ "$(findstring _cs0boot_, $@)" ] ; then \
-               echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
+               echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
                echo "... configured for CS0 boot"; \
        elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
-               echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
+               echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
                echo "... configured for CS_AUTO boot"; \
        else \
-               echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
+               echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
                echo "... configured for CS3 boot"; \
        fi;
        @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
@@ -2205,11 +2201,12 @@ logodl_config   :       unconfig
 
 pdnb3_config \
 scpu_config:    unconfig
+       @mkdir -p $(obj)include
        @if [ "$(findstring scpu_,$@)" ] ; then \
-               echo "#define CONFIG_SCPU"      >>include/config.h ; \
+               echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
                echo "... on SCPU board variant" ; \
        else \
-               >include/config.h ; \
+               >$(obj)include/config.h ; \
        fi
        @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
 
@@ -2431,14 +2428,16 @@ suzaku_config:  unconfig
        @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 ml401_config:  unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_ML401 1" >> include/config.h
-       @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+       @mkdir -p $(obj)include
+       @ >$(obj)include/config.h
+       @echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
+       @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
 
 xupv2p_config: unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_XUPV2P 1" >> include/config.h
-       @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+       @mkdir -p $(obj)include
+       @ >$(obj)include/config.h
+       @echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
+       @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
 
 #########################################################################
 ## Blackfin
@@ -2463,7 +2462,7 @@ bf561-ezkit_config:       unconfig
 #########################################################################
 
 atstk1002_config       :       unconfig
-       @./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+       @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
 
 #########################################################################
 #########################################################################