VERSION = 1
PATCHLEVEL = 3
-SUBLEVEL = 2
+SUBLEVEL = 3
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
#########################################################################
+ifeq ($(ARCH),powerpc)
+ARCH = ppc
+endif
+
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
# load ARCH, BOARD, and CPU configuration
endif
ifeq ($(ARCH),sh)
CROSS_COMPILE = sh4-linux-
-endif # sh
+endif
+ifeq ($(ARCH),sparc)
+CROSS_COMPILE = sparc-elf-
+endif # sparc
endif # HOSTARCH,ARCH
endif # CROSS_COMPILE
LIBS = lib_generic/libgeneric.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
-LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
ifdef SOC
LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/usb/libusb.a
LIBS += drivers/video/libvideo.a
-LIBS += post/libpost.a post/drivers/libpostdrivers.a
-LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
- "post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
-LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
- "post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
-LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
- "post/cpu/$(CPU)/libpost$(CPU).a"; fi)
-LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
- "post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
LIBS += api/libapi.a
+LIBS += post/libpost.a
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(VERSION_FILE)
+LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
+LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
+
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
__OBJS := $(subst $(obj),,$(OBJS))
-__LIBS := $(subst $(obj),,$(LIBS))
+__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
#########################################################################
#########################################################################
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
+$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
+ UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+ sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(LIBS): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
+$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk
+ $(MAKE) -C $(dir $(subst $(obj),,$@))
+
$(SUBDIRS): depend $(obj)include/autoconf.mk
$(MAKE) -C $@ all
cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
$(VERSION_FILE):
- @( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
- echo -n "$(U_BOOT_VERSION)" ; \
- echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
- $(TOPDIR)) ; \
- echo "\"" ) > $@.tmp
+ @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
+ '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
+ ) > $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
gdbtools:
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
TAG_SUBDIRS += drivers/net/sk98lin
TAG_SUBDIRS += drivers/pci
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
-$(obj)include/autoconf.mk: $(obj)include/config.h $(VERSION_FILE)
- @$(XECHO) Generating include/autoconf.mk ; \
+$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
+ @$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
- $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep ; \
+ $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \
+ -MQ $(obj)include/autoconf.mk include/common.h > $@
+
+$(obj)include/autoconf.mk: $(obj)include/config.h
+ @$(XECHO) Generating $@ ; \
+ set -e ; \
: Extract the config macros ; \
- $(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed > $@
+ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
+ sed -n -f tools/scripts/define2mk.sed > $@
sinclude $(obj)include/autoconf.mk.dep
#########################################################################
aev_config: unconfig
- @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
BC3450_config: unconfig
@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
smmaco4_config: unconfig
- @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
cm5200_config: unconfig
@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
spieval_config: unconfig
- @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
TB5200_B_config \
TB5200_config: unconfig
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200B processor" ; \
}
- @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TQM5200_config \
TQM5200_STK100_config: unconfig
@mkdir -p $(obj)include
- @mkdir -p $(obj)board/tqm5200
+ @mkdir -p $(obj)board/tqc/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
- @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
motionpro_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
IAD210_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
spc1920_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display" ; \
}
- @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
uc100_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
- @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
-canyonlands_nand_config: unconfig
+canyonlands_nand_config \
+glacier_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
+ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+quad100hd_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
kvme080_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
+# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
+# time permits.
+#linkstation_HDLAN_config \
+# Remove this line when HDLAN is fixed
+linkstation_HGLAN_config: unconfig
+ @mkdir -p $(obj)include
+ @case $@ in \
+ *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
+ *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
+ esac
+ @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
+
MOUSSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... without 60x Bus Mode" ; \
fi
- @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
+ @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
TQM8272_config: unconfig
- @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272
+ @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
M5272C3_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3
+M5275EVB_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
+
M5282EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
TASREG_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
-r5200_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
-
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
TQM834x_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
#########################################################################
fi
@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
+socrates_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
+
stxgp3_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
TQM8540_config \
TQM8541_config \
+TQM8548_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
- echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
- @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
+ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+ @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
#########################################################################
## MPC86xx Systems
## ARM92xT Systems
#########################################################################
-xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
+#########################################################################
+## Atmel AT91RM9200 Systems
+#########################################################################
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
+at91rm9200dk_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+at91sam9261ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9
-at91cap9adk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91cap9
+at91sam9263ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9
-at91rm9200dk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+at91sam9rlek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
csb637_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
+kb9202_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
+
mp2usb_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
m501sk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
+#########################################################################
+## Atmel ARM926EJ-S Systems
+#########################################################################
+
+at91cap9adk_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9
+
+at91sam9260ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9
+
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
-kb9202_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
-
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
-pmdra_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci
+xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
omap1610inn_cs0boot_config \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
+xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
+xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
+
trab_config \
trab_bigram_config \
trab_bigflash_config \
# AVR32
#========================================================================
#########################################################################
-## AT32AP7xxx
+## AT32AP70xx
#########################################################################
atstk1002_config : unconfig
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atstk1006_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
@echo "#define CONFIG_R2DPLUS 1" >> include/config.h
@./mkconfig -a $(@:_config=) sh sh4 r2dplus
+#========================================================================
+# SPARC
+#========================================================================
+#########################################################################
+## LEON3
+#########################################################################
+
+# Gaisler GR-XC3S-1500 board
+gr_xc3s_1500_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
+
+# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
+gr_cpci_ax2000_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
+
+# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
+# Development board Stratix II edition, FPGA Device EP2S60.
+gr_ep2s60_config: unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
+
+# Gaisler LEON3 GRSIM simulator
+grsim_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
+
+#########################################################################
+## LEON2
+#########################################################################
+
+# Gaisler LEON2 GRSIM simulator
+grsim_leon2_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
+
#########################################################################
#########################################################################
#########################################################################
$(obj)board/{integratorap,integratorcp}/u-boot.lds \
$(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
- @rm -f $(obj)include/bmp_logo.h $(obj)nand_spl/{u-boot-spl,u-boot-spl.map}
+ @rm -f $(obj)include/bmp_logo.h
+ @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
@rm -f $(obj)api_examples/demo $(VERSION_FILE)
@find $(OBJTREE) -type f \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
- @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c}
+ @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
@rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm