# SPDX-License-Identifier: GPL-2.0+
-VERSION = 2019
-PATCHLEVEL = 10
+VERSION = 2020
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
NAME =
# *DOCUMENTATION*
# o Look for make include files relative to root of kernel src
MAKEFLAGS += -rR --include-dir=$(CURDIR)
+# Determine host architecture
+include include/host_arch.h
+MK_ARCH="${shell uname -m}"
+unexport HOST_ARCH
+ifeq ("x86_64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_X86_64)
+else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
+ export HOST_ARCH=$(HOST_ARCH_X86)
+else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
+ export HOST_ARCH=$(HOST_ARCH_AARCH64)
+else ifeq ("armv7l", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_ARM)
+else ifeq ("riscv32", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV32)
+else ifeq ("riscv64", $(MK_ARCH))
+ export HOST_ARCH=$(HOST_ARCH_RISCV64)
+endif
+undefine MK_ARCH
+
# Avoid funny character set dependencies
unexport LC_ALL
LC_COLLATE=C
# KBUILD_MODULES := 1
#endif
+# Check ths size of a binary:
+# Args:
+# $1: File to check
+# #2: Size limit in bytes (decimal or 0xhex)
define size_check
actual=$$( wc -c $1 | awk '{print $$1}'); \
limit=$$( printf "%d" $2 ); \
if test $$actual -gt $$limit; then \
echo "$1 exceeds file size limit:" >&2; \
- echo " limit: $$limit bytes" >&2; \
- echo " actual: $$actual bytes" >&2; \
- echo " excess: $$((actual - limit)) bytes" >&2; \
+ echo " limit: $$(printf %#x $$limit) bytes" >&2; \
+ echo " actual: $$(printf %#x $$actual) bytes" >&2; \
+ echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
exit 1; \
fi
endef
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
+libs-y += drivers/usb/cdns3/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/
libs-y += drivers/usb/emul/
libs-$(CONFIG_HAS_POST) += post/
libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
libs-$(CONFIG_UT_ENV) += test/env/
+libs-$(CONFIG_UT_OPTEE) += test/optee/
libs-$(CONFIG_UT_OVERLAY) += test/overlay/
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
SPL_SIZE_CHECK =
endif
+ifneq ($(CONFIG_TPL_SIZE_LIMIT),0)
+TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
+else
+TPL_SIZE_CHECK =
+endif
+
# Statically apply RELA-style relocations (currently arm64 only)
# This is useful for arm64 where static relocation needs to be performed on
# the raw binary, but certain simulators only accept an ELF file (but don't
endif
endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
-ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
-ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-y += u-boot-with-dtb.bin
endif
+ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
+ALL-y += idbloader.img
+endif
+
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
endif
endif
endif
+ifneq ($(CONFIG_DM),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
+ @echo >&2 "compulsory starting with the v2020.01 release."
+ @echo >&2 "Failure to update may result in board removal."
+ @echo >&2 "See doc/driver-model/migration.rst for more info."
+ @echo >&2 "===================================================="
+endif
ifeq ($(CONFIG_MMC),y)
ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
@echo >&2 "===================== WARNING ======================"
@echo >&2 "===================================================="
endif
endif
+ifneq ($(CONFIG_NET),)
+ifneq ($(CONFIG_DM_ETH),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
+ @echo >&2 "for Ethernet drivers). Please update the board to use"
+ @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
+ @echo >&2 "update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/migration.rst for more info."
+ @echo >&2 "===================================================="
+endif
+endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
@# options are whitelisted, so new ones should not be added.
$(call if_changed,copy)
endif
-%.imx: %.bin
+# we call Makefile in arch/arm/mach-imx which
+# has targets which are dependent on targets defined
+# here. make could not resolve them and we must ensure
+# that they are finished before calling imx targets
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
+IMX_DEPS = u-boot-fit-dtb.bin
+endif
+
+%.imx: $(IMX_DEPS) %.bin
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
$(BOARD_SIZE_CHECK)
# Use 'make BINMAN_DEBUG=1' to enable debugging
quiet_cmd_binman = BINMAN $@
cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
- build -u -d u-boot.dtb -O . -m \
+ --toolpath $(objtree)/tools \
+ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
+ build -u -d u-boot.dtb -O . -m \
-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
$(BINMAN_$(@F))
CONFIG_SYS_UBOOT_START := 0
endif
-# Boards with more complex image requirments can provide an .its source file
+# Boards with more complex image requirements can provide an .its source file
# or a generator script
ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
ifdef CONFIG_SPL_LOAD_FIT
MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
else
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
-CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
endif
MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
-MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+# Some boards have the kwbimage.cfg file written in advance, while some
+# other boards generate it on the fly during the build in the build tree.
+# Let's check if the file exists in the build tree first, otherwise we
+# fall back to use the one in the source tree.
+KWD_CONFIG_FILE = $(shell \
+ if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
+ echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ else \
+ echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
+ fi)
+
+MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
-MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
$(if $(KEYDIR),-k $(KEYDIR))
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+UBOOT_BIN := u-boot-with-dtb.bin
+else
+UBOOT_BIN := u-boot.bin
+endif
+
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
- ,u-boot.bin) FORCE
+ ,$(UBOOT_BIN)) FORCE
$(call if_changed,mkimage)
$(BOARD_SIZE_CHECK)
u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
$(call if_changed,pad_cat)
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd
+tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
+ $(call if_changed,mkimage)
+idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
+ $(call if_changed,cat)
+endif
+
ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
$(call if_changed,cat)
-CLEAN_FILES += lpc32xx-*
endif
OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
endif
+endif
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
u-boot.img > $@ || rm -f $@
u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
$(call if_changed,socboot)
+
+quiet_cmd_socnandboot = SOCNANDBOOT $@
+cmd_socnandboot = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
+ cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ spl/u-boot-spl.sfp spl/u-boot-spl.pad \
+ u-boot.img > $@ || rm -f $@ spl/u-boot-spl.pad
+u-boot-with-nand-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
+ $(call if_changed,socnandboot)
+
endif
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
$(filter-out FORCE,$^) -o $@
-u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
+u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \
$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
$(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
$(call if_changed,binman)
-OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
-u-boot-x86-16bit.bin: u-boot FORCE
+OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
+u-boot-x86-start16.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
+u-boot-x86-reset16.bin: u-boot FORCE
$(call if_changed,objcopy)
endif
# make sure no implicit rule kicks in
$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
-# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Handle descending into subdirectories listed in $(u-boot-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
(grep -v '^#' | \
grep -v '^$$' | \
tr '\n' '\0' | \
- sed -e 's/\\\x0/\n/' | \
+ sed -e 's/\\\x0/\n/g' | \
xxd -i ; echo ", 0x00" ; )
endef
tpl/u-boot-tpl.bin: tools prepare \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
+ $(TPL_SIZE_CHECK)
TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
cscope:
$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
cscope.files
+ @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
+ grep -xvf - cscope.files > cscope.files.no-symlinks; \
+ mv cscope.files.no-symlinks cscope.files
cscope -b -q -k
SYSTEM_MAP = \
false; \
fi
-envtools: scripts_basic $(version_h) $(timestamp_h)
+tools/version.h: include/version.h
+ $(call if_changed,copy)
+
+envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
$(Q)$(MAKE) $(build)=tools/env
tools-only: export TOOLS_ONLY=y
-tools-only: scripts_basic $(version_h) $(timestamp_h)
+tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
$(Q)$(MAKE) $(build)=tools
tools-all: export HOST_TOOLS_ALL=y
$(foreach d, spl tpl, $(patsubst %,$d/%, \
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
-CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
- boot* u-boot* MLO* SPL System.map fit-dtb.blob*
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
+ boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
+ u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
+ lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
+ idbloader.img
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include/generated spl tpl \
$(call cmd,rmfiles)
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '*.ko.*' -o -name '*.su' \
+ -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
- -type f -print | xargs rm -f \
- bl31.c bl31.elf bl31_*.bin image.map
+ -type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config
#