# SPDX-License-Identifier: GPL-2.0+
#
-VERSION = 2013
-PATCHLEVEL = 10
+VERSION = 2014
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
# the object files are placed in the source directory.
#
-ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
-endif
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
# is "yes"), so compile examples after U-Boot is compiled.
SUBDIR_TOOLS = tools
-SUBDIR_EXAMPLES = examples/standalone examples/api
SUBDIRS = $(SUBDIR_TOOLS)
.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk
+SUBDIR_EXAMPLES-y := examples/standalone
+SUBDIR_EXAMPLES-$(CONFIG_API) += examples/api
ifndef CONFIG_SANDBOX
-SUBDIRS += $(SUBDIR_EXAMPLES)
+SUBDIRS += $(SUBDIR_EXAMPLES-y)
endif
# load ARCH, BOARD, and CPU configuration
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
# need to strip off double quotes
- LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+ LDSCRIPT := $(CONFIG_SYS_LDSCRIPT:"%"=%)
endif
endif
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
-LIBS-y += lib/libgeneric.o
-LIBS-y += lib/rsa/librsa.o
-LIBS-y += lib/lzma/liblzma.o
-LIBS-y += lib/lzo/liblzo.o
-LIBS-y += lib/zlib/libz.o
-LIBS-$(CONFIG_TIZEN) += lib/tizen/libtizen.o
-LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o
-LIBS-y += $(CPUDIR)/lib$(CPU).o
+LIBS-y += lib/
+LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+LIBS-y += $(CPUDIR)/
ifdef SOC
-LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
-endif
-ifeq ($(CPU),ixp)
-LIBS-y += drivers/net/npe/libnpe.o
-endif
-LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
-LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/libfs.o \
- fs/fat/libfat.o
-LIBS-y += net/libnet.o
-LIBS-y += disk/libdisk.o
-LIBS-y += drivers/libdrivers.o
-LIBS-y += drivers/dma/libdma.o
-LIBS-y += drivers/gpio/libgpio.o
-LIBS-y += drivers/i2c/libi2c.o
-LIBS-y += drivers/input/libinput.o
-LIBS-y += drivers/mmc/libmmc.o
-LIBS-y += drivers/mtd/libmtd.o
-LIBS-y += drivers/mtd/nand/libnand.o
-LIBS-y += drivers/mtd/onenand/libonenand.o
-LIBS-y += drivers/mtd/ubi/libubi.o
-LIBS-y += drivers/mtd/spi/libspi_flash.o
-LIBS-y += drivers/net/libnet.o
-LIBS-y += drivers/net/phy/libphy.o
-LIBS-y += drivers/pci/libpci.o
-LIBS-y += drivers/power/libpower.o \
- drivers/power/fuel_gauge/libfuel_gauge.o \
- drivers/power/mfd/libmfd.o \
- drivers/power/pmic/libpmic.o \
- drivers/power/battery/libbattery.o
-LIBS-y += drivers/spi/libspi.o
-ifeq ($(CPU),mpc83xx)
-LIBS-y += drivers/qe/libqe.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-ifeq ($(CPU),mpc85xx)
-LIBS-y += drivers/qe/libqe.o
-LIBS-y += drivers/net/fm/libfm.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-ifeq ($(CPU),mpc86xx)
-LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-LIBS-y += drivers/serial/libserial.o
-LIBS-y += drivers/usb/eth/libusb_eth.o
-LIBS-y += drivers/usb/gadget/libusb_gadget.o
-LIBS-y += drivers/usb/host/libusb_host.o
-LIBS-y += drivers/usb/musb/libusb_musb.o
-LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
-LIBS-y += drivers/usb/phy/libusb_phy.o
-LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
-LIBS-y += common/libcommon.o
-LIBS-y += lib/libfdt/libfdt.o
-LIBS-y += api/libapi.o
-LIBS-y += post/libpost.o
-LIBS-y += test/libtest.o
+LIBS-y += $(CPUDIR)/$(SOC)/
+endif
+LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/
+LIBS-$(CONFIG_OF_EMBED) += dts/
+LIBS-y += arch/$(ARCH)/lib/
+LIBS-y += fs/
+LIBS-y += net/
+LIBS-y += disk/
+LIBS-y += drivers/
+LIBS-y += drivers/dma/
+LIBS-y += drivers/gpio/
+LIBS-y += drivers/i2c/
+LIBS-y += drivers/input/
+LIBS-y += drivers/mmc/
+LIBS-y += drivers/mtd/
+LIBS-y += drivers/mtd/nand/
+LIBS-y += drivers/mtd/onenand/
+LIBS-y += drivers/mtd/ubi/
+LIBS-y += drivers/mtd/spi/
+LIBS-y += drivers/net/
+LIBS-y += drivers/net/phy/
+LIBS-y += drivers/pci/
+LIBS-y += drivers/power/ \
+ drivers/power/fuel_gauge/ \
+ drivers/power/mfd/ \
+ drivers/power/pmic/ \
+ drivers/power/battery/
+LIBS-y += drivers/spi/
+LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/
+LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+LIBS-y += drivers/serial/
+LIBS-y += drivers/usb/eth/
+LIBS-y += drivers/usb/gadget/
+LIBS-y += drivers/usb/host/
+LIBS-y += drivers/usb/musb/
+LIBS-y += drivers/usb/musb-new/
+LIBS-y += drivers/usb/phy/
+LIBS-y += drivers/usb/ulpi/
+LIBS-y += common/
+LIBS-y += lib/libfdt/
+LIBS-$(CONFIG_API) += api/
+LIBS-$(CONFIG_HAS_POST) += post/
+LIBS-y += test/
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
-LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
+LIBS-y += arch/$(ARCH)/imx-common/
endif
-LIBS-$(CONFIG_ARM) += arch/arm/cpu/libcpu.o
+LIBS-$(CONFIG_ARM) += arch/arm/cpu/
+LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/
+LIBS-y += board/$(BOARDDIR)/
+
+LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y))
LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
.PHONY : $(LIBS)
-LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
-LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
-
# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
__OBJS := $(subst $(obj),,$(OBJS))
-__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
+__LIBS := $(subst $(obj),,$(LIBS))
#########################################################################
#########################################################################
ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
ifneq ($(CONFIG_SPL_TARGET),)
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+ALL-$(CONFIG_SPL) += $(obj)$(CONFIG_SPL_TARGET:"%"=%)
endif
# enable combined SPL/u-boot/dtb rules for tegra
build := -f $(TOPDIR)/scripts/Makefile.build -C
-all: $(ALL-y) $(SUBDIR_EXAMPLES)
+all: $(ALL-y) $(SUBDIR_EXAMPLES-y)
$(obj)u-boot.dtb: checkdtc $(obj)u-boot
$(MAKE) $(build) dts binary
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
- $(OBJCOPY) -O srec $< $@
+ $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
- $(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
+ $(MAKE) $(build) $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
endif
$(obj)u-boot: depend \
- $(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
+ $(SUBDIR_TOOLS) $(OBJS) $(LIBS) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
$(LIBS): depend $(SUBDIR_TOOLS)
$(MAKE) $(build) $(dir $(subst $(obj),,$@))
- mv $(dir $@)built-in.o $@
-
-$(LIBBOARD): depend $(LIBS)
- $(MAKE) $(build) $(dir $(subst $(obj),,$@))
- mv $(dir $@)built-in.o $@
$(SUBDIRS): depend
$(MAKE) -C $@ all
-$(SUBDIR_EXAMPLES): $(obj)u-boot
+$(SUBDIR_EXAMPLES-y): $(obj)u-boot
-$(LDSCRIPT): depend
- $(MAKE) -C $(dir $@) $(notdir $@)
-
-$(obj)u-boot.lds: $(LDSCRIPT)
+$(obj)u-boot.lds: $(LDSCRIPT) depend
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(obj)tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend
$(MAKE) -C spl all CONFIG_TPL_BUILD=y
-updater:
- $(MAKE) -C tools/updater all
-
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
LC_ALL=C sort
$(obj)System.map: $(obj)u-boot
- @$(call SYSTEM_MAP,$<) > $(obj)System.map
+ @$(call SYSTEM_MAP,$<) > $@
checkthumb:
@if test $(call cc-version) -lt 0404; then \
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Generate the dependancies ; \
$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
- -MQ $(obj)include/autoconf.mk include/common.h > $@
+ -MQ $(obj)include/autoconf.mk include/common.h > $@ || \
+ rm $@
$(obj)include/autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Extract the config macros ; \
- $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
- mv $@.tmp $@
+ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed $@.tmp > $@; \
+ rm $@.tmp
# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL)
$(obj)include/tpl-autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD -DCONFIG_SPL_BUILD\
- -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
- mv $@.tmp $@
+ -DDO_DEPS_ONLY -dM include/common.h > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed $@.tmp > $@; \
+ rm $@.tmp
$(obj)include/spl-autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
- set -e ; \
: Extract the config macros ; \
- $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
- mv $@.tmp $@
-
-$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk \
- $(obj)lib/asm-offsets.s
+ $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed $@.tmp > $@; \
+ rm $@.tmp
+
+$(obj)include/generated/generic-asm-offsets.h: $(obj)lib/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
-$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk \
- $(src)lib/asm-offsets.c
+$(obj)lib/asm-offsets.s: $(obj)include/config.h $(src)lib/asm-offsets.c
@mkdir -p $(obj)lib
$(CC) -DDO_DEPS_ONLY \
$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-o $@ $(src)lib/asm-offsets.c -c -S
-$(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk \
- $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
+$(obj)include/generated/asm-offsets.h: $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
-$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep \
- $(obj)include/spl-autoconf.mk \
- $(obj)include/tpl-autoconf.mk
+$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/config.h
@mkdir -p $(obj)$(CPUDIR)/$(SOC)
if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
$(CC) -DDO_DEPS_ONLY \
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(filter-out tools,$(SUBDIRS)) \
-updater depend dep tags ctags etags cscope $(obj)System.map:
+depend dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
$(obj).boards.depend: boards.cfg
@awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE)" }' $< > $@
-#
-# Functions to generate common board directory names
-#
-lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
-ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-
#########################################################################
#########################################################################
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
+ $(obj)tools/dump{env,}image \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{$(BOARD),}spl \
$(obj)tools/mxsboot \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
- $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)include/bmp_logo_data.h
@rm -f $(obj)MLO MLO.byteswap
@rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
- @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
- @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@rm -fr $(obj)include/generated
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f