ifeq ($(ARCH),microblaze)
CROSS_COMPILE = mb-
endif
+ifeq ($(ARCH),blackfin)
+CROSS_COMPILE = bfin-elf-
+endif
endif
endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
+ifeq ($(CPU),bf533)
+OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o
+endif
LIBS = lib_generic/libgeneric.a
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += rtc/librtc.a
LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
+LIBS += drivers/nand/libnand.a
+LIBS += drivers/nand_legacy/libnand_legacy.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
inka4x0_config: unconfig
@./mkconfig inka4x0 ppc mpc5xxx inka4x0
+lite5200b_config \
+lite5200b_LOWBOOT_config: unconfig
+ @ >include/config.h
+ @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h
+ @ echo "... DDR memory revision"
+ @ echo "#define CONFIG_MPC5200" >>include/config.h
+ @ echo "#define CONFIG_LITE5200B" >>include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @ echo "... with MPC5200B processor"
+ @./mkconfig -a IceCube ppc mpc5xxx icecube
+
mcc200_config \
mcc200_lowboot_config: unconfig
@ >include/config.h
ELPT860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+EP88x_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx ep88x
+
ESTEEM192E_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx esteem192e
}
@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
-NC650_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx nc650
+NC650_Rev1_config \
+NC650_Rev2_config \
+CP850_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring CP850,$@)" ] || \
+ { echo "#define CONFIG_CP850 1" >>include/config.h ; \
+ echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring Rev1,$@)" ] || \
+ { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring Rev2,$@)" ] || \
+ { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ }
+ @./mkconfig -a NC650 ppc mpc8xx nc650
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
- @if [ -z "$(findstring _PCI_,$@)" ] ; then \
+ @if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>include/config.h ; \
echo "... with PCI enabled" ; \
else \
TQM834x_config: unconfig
@./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+MPC8349EMDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
+
#########################################################################
## MPC85xx Systems
#########################################################################
@./mkconfig $(@:_config=) arm arm925t omap1510inn
omap5912osk_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap5912osk
+ @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap
omap1610inn_config \
omap1610inn_cs0boot_config \
echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
+ @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap730p2_config \
omap730p2_cs0boot_config \
echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+ @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
scb9328_config : unconfig
@./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
@./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
#########################################################################
+## Blackfin
+#########################################################################
+ezkit533_config : unconfig
+ @./mkconfig $(@:_config=) blackfin bf533 ezkit533
+
+stamp_config : unconfig
+ @./mkconfig $(@:_config=) blackfin bf533 stamp
+
+dspstamp_config : unconfig
+ @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp
+
+#########################################################################
+#########################################################################
#########################################################################
clean:
rm -f examples/hello_world examples/timer \
examples/eepro100_eeprom examples/sched \
examples/mem_to_mem_idma2intr examples/82559_eeprom \
+ examples/smc91111_eeprom \
examples/test_burst
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
rm -f tools/mpc86x_clk tools/ncb
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
rm -f board/netstar/eeprom board/netstar/crcek
- rm -f board/netstar/*.srec board/netstar/*.bin
+ rm -f board/netstar/*.srec board/netstar/*.bin
rm -f board/trab/trab_fkt board/voiceblue/eeprom
rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds