int
default $(shell,$(srctree)/scripts/clang-version.sh $(CC))
+choice
+ prompt "Optimization level"
+ default CC_OPTIMIZE_FOR_SIZE
+
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
- default y
help
- Enabling this option will pass "-Os" instead of "-O2" to gcc
- resulting in a smaller U-Boot image.
+ Enabling this option will pass "-Os" to gcc, resulting in a smaller
+ U-Boot image.
This option is enabled by default for U-Boot.
+config CC_OPTIMIZE_FOR_SPEED
+ bool "Optimize for speed"
+ help
+ Enabling this option will pass "-O2" to gcc, resulting in a faster
+ U-Boot image.
+
+config CC_OPTIMIZE_FOR_DEBUG
+ bool "Optimize for debugging"
+ help
+ Enabling this option will pass "-Og" to gcc, enabling optimizations
+ which don't interfere with debugging.
+
+endchoice
+
config OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline' in full U-Boot"
- default n
help
This option determines if U-Boot forces gcc to inline the functions
developers have marked 'inline'. Doing so takes away freedom from gcc to
config SPL_OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline' in SPL"
depends on SPL
- default n
help
This option determines if U-Boot forces gcc to inline the functions
developers have marked 'inline'. Doing so takes away freedom from gcc to
config LTO
bool "Enable Link Time Optimizations"
depends on ARCH_SUPPORTS_LTO
- default n
help
This option enables Link Time Optimization (LTO), a mechanism which
allows the compiler to optimize between different compilation units.
config TPL_OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline' in TPL"
depends on TPL
- default n
help
This option determines if U-Boot forces gcc to inline the functions
developers have marked 'inline'. Doing so takes away freedom from gcc to
config SYS_MALLOC_F_LEN
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
- default 0x1000 if AM33XX
- default 0x4000 if SANDBOX
- default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
- ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
- ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
- ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL)
- default 0x400
+ default 0x400 if M68K || PPC || ROCKCHIP_PX30 || ROCKCHIP_RK3036 || \
+ ROCKCHIP_RK3308 || ROCKCHIP_RV1108
+ default 0x600 if ARCH_ZYNQMP_R5 || ARCH_ZYNQMP
+ default 0x800 if ARCH_ZYNQ || ROCKCHIP_RK3128 || ROCKCHIP_RK3188 || \
+ ROCKCHIP_RK322X || X86
+ default 0x1000 if ARCH_MESON || ARCH_BMIPS || ARCH_MTMIPS
+ default 0x1800 if ARCH_TEGRA
+ default 0x4000 if SANDBOX || RISCV || ARCH_APPLE || ROCKCHIP_RK3368 || \
+ ROCKCHIP_RK3399
+ default 0x8000 if RCAR_GEN3
+ default 0x10000 if ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ)
+ default 0x2000
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
config SYS_MALLOC_LEN
hex "Define memory for Dynamic allocation"
- depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP || ARCH_ROCKCHIP
- default 0x2000000 if ARCH_ROCKCHIP
+ default 0x4000000 if SANDBOX
+ default 0x2000000 if ARCH_ROCKCHIP || ARCH_OMAP2PLUS || ARCH_MESON
+ default 0x200000 if ARCH_BMIPS || X86
+ default 0x120000 if MACH_SUNIV
+ default 0x220000 if MACH_SUN8I_V3S
+ default 0x4020000 if ARCH_SUNXI
+ default 0x400000
help
This defines memory to be allocated for Dynamic allocation
TODO: Use for other architectures
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in SPL"
depends on SYS_MALLOC_F && SPL
+ default 0 if !SPL_FRAMEWORK
default 0x2800 if RCAR_GEN3
default SYS_MALLOC_F_LEN
help
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
+config VALGRIND
+ bool "Inform valgrind about memory allocations"
+ depends on !RISCV
+ help
+ Valgrind is an instrumentation framework for building dynamic analysis
+ tools. In particular, it may be used to detect memory management bugs
+ in U-Boot. It relies on knowing when heap blocks are allocated in
+ order to give accurate results. This happens automatically for
+ standard allocator functions provided by the host OS. However, this
+ doesn't automatically happen for U-Boot's malloc implementation.
+
+ Enable this option to annotate U-Boot's malloc implementation so that
+ it can be handled accurately by Valgrind. If you aren't planning on
+ using valgrind to debug U-Boot, say 'n'.
+
+config VPL_SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool in VPL before relocation"
+ depends on SYS_MALLOC_F && VPL
+ default SYS_MALLOC_F_LEN
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
config SYS_MALLOC_DEFAULT_TO_INIT
bool "Default malloc to init while reserving the memory for it"
- default n
help
It may happen that one needs to move the dynamic allocation
from one to another memory range, eg. when moving the malloc
Enables building of a u-boot.rom target. This collects U-Boot and
any necessary binary blobs.
-config ROM_NEEDS_BLOBS
- bool
- depends on HAS_ROM
- help
- Enable this if building the u-boot.rom target needs binary blobs, and
- so cannot be done normally. In this case, U-Boot will only build the
- ROM if the required blobs exist. If not, you will see an warning like:
-
- Image 'main-section' is missing external blobs and is non-functional:
- intel-descriptor intel-me intel-refcode intel-vga intel-mrc
-
-config BUILD_ROM
- bool "Build U-Boot as BIOS replacement"
- depends on HAS_ROM
- default y if !ROM_NEEDS_BLOBS
- help
- This option allows to build a ROM version of U-Boot.
- The build process generally requires several binary blobs
- which are not shipped in the U-Boot source tree.
- Please, see doc/arch/x86.rst for details.
-
config SPL_IMAGE
string "SPL image used in the combined SPL+U-Boot image"
default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
used to generate a combined image with SPL and main U-Boot
proper as one single image.
+config REMAKE_ELF
+ bool "Recreate an ELF image from raw U-Boot binary"
+ help
+ Enable this to recreate an ELF image (u-boot.elf) from the raw
+ U-Boot binary (u-boot.bin), which may already have been statically
+ relocated and may already have a device-tree appended to it.
+
config BUILD_TARGET
string "Build target special images"
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
special image will be automatically built upon calling
make / buildman.
+config HAS_BOARD_SIZE_LIMIT
+ bool "Define a maximum size for the U-Boot image"
+ default y if RCAR_GEN3
+ help
+ In some cases, we need to enforce a hard limit on how big the U-Boot
+ image itself can be.
+
+config BOARD_SIZE_LIMIT
+ int "Maximum size of the U-Boot image in bytes"
+ default 1048576 if RCAR_GEN3
+ depends on HAS_BOARD_SIZE_LIMIT
+ help
+ Maximum size of the U-Boot image. When defined, the build system
+ checks that the actual size does not exceed it. This does not
+ include SPL nor TPL, on platforms that use that functionality, they
+ have a separate option to restict size.
+
config SYS_CUSTOM_LDSCRIPT
bool "Use a custom location for the U-Boot linker script"
help
Path within the source tree to the linker script to use for the
main U-Boot binary.
+config SYS_LOAD_ADDR
+ hex "Address in memory to use by default"
+ default 0x01000000 if ARCH_SOCFPGA
+ default 0x02000000 if PPC || X86
+ default 0x81000000 if MACH_SUNIV
+ default 0x22000000 if MACH_SUN9I
+ default 0x42000000 if ARCH_SUNXI
+ default 0x82000000 if ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
+ default 0x82000000 if ARCH_MX6 && (MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
+ default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
+ default 0x80800000 if ARCH_MX7
+ default 0x90000000 if FSL_LSCH2 || FSL_LSCH3
+ help
+ Address in memory to use as the default safe load address.
+
config ERR_PTR_OFFSET
hex
default 0x0
by the UEFI sub-system. On some boards initrd_high is calculated as
base stack pointer minus this stack size.
+config SYS_MEM_TOP_HIDE
+ hex "Exclude some memory from U-Boot / OS information"
+ default 0x0
+ help
+ If set, this specified memory area will get subtracted from the top
+ (end) of RAM and won't get "touched" at all by U-Boot. By fixing up
+ gd->ram_size the OS / next stage should gets passed the now
+ "corrected" memory size and won't touch it either.
+ WARNING: Please make sure that this value is a multiple of the OS
+ page size.
+
config SYS_HAS_SRAM
bool
default y if TARGET_PIC32MZDASK
default y if TARGET_DEVKIT8000
default y if TARGET_TRICORDER
- default n
help
Enable this to allow support for the on board SRAM.
SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.
default 0x10000 if TARGET_TRICORDER
default 0x0
+config MP
+ bool "Support for multiprocessor"
+ help
+ This provides an option to bringup different processors
+ in multiprocessor cases.
+
config EXAMPLES
bool "Compile API examples"
depends on !SANDBOX
source "api/Kconfig"
+source "boot/Kconfig"
+
source "common/Kconfig"
source "cmd/Kconfig"