arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace

[platform/kernel/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 0ee3068..f017968 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -228,6 +228,14 @@ config SYS_BOOT_GET_CMDLINE
          Enables allocating and saving kernel cmdline in space between
          "bootm_low" and "bootm_low" + BOOTMAPSZ.
 
+config SYS_BARGSIZE
+       int "Size of kernel command line buffer in bytes"
+       depends on SYS_BOOT_GET_CMDLINE
+       default 512
+       help
+         Buffer size for Boot Arguments which are passed to the application
+         (usually a Linux kernel) when it is booted
+
 config SYS_BOOT_GET_KBD
        bool "Enable kernel board information setup"
        help
@@ -247,14 +255,18 @@ config SYS_MALLOC_F
 config SYS_MALLOC_F_LEN
        hex "Size of malloc() pool before relocation"
        depends on SYS_MALLOC_F
-       default 0x1000 if AM33XX
-       default 0x4000 if SANDBOX || RISCV
-       default 0x2000 if (ARCH_MX7 || ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
-                          ARCH_QEMU || ARCH_SUNXI || ARCH_OWL || IMX8MQ)
-       default 0x10000 if (ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ) || \
-                           ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
-                           ARCH_LS1046A)
-       default 0x400
+       default 0x400 if M68K || PPC || ROCKCHIP_PX30 || ROCKCHIP_RK3036 || \
+                        ROCKCHIP_RK3308 || ROCKCHIP_RV1108
+       default 0x600 if ARCH_ZYNQMP_R5 || ARCH_ZYNQMP
+       default 0x800 if ARCH_ZYNQ || ROCKCHIP_RK3128 || ROCKCHIP_RK3188 || \
+                        ROCKCHIP_RK322X || X86
+       default 0x1000 if ARCH_MESON || ARCH_BMIPS || ARCH_MTMIPS
+       default 0x1800 if ARCH_TEGRA
+       default 0x4000 if SANDBOX || RISCV || ARCH_APPLE || ROCKCHIP_RK3368 || \
+                         ROCKCHIP_RK3399
+       default 0x8000 if RCAR_GEN3
+       default 0x10000 if ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ)
+       default 0x2000
        help
          Before relocation, memory is very limited on many platforms. Still,
          we can provide a small malloc() pool if needed. Driver model in
@@ -263,6 +275,7 @@ config SYS_MALLOC_F_LEN
 
 config SYS_MALLOC_LEN
        hex "Define memory for Dynamic allocation"
+       default 0x4000000 if SANDBOX
        default 0x2000000 if ARCH_ROCKCHIP || ARCH_OMAP2PLUS || ARCH_MESON
        default 0x200000 if ARCH_BMIPS || X86
        default 0x120000 if MACH_SUNIV
@@ -276,6 +289,7 @@ config SYS_MALLOC_LEN
 config SPL_SYS_MALLOC_F_LEN
        hex "Size of malloc() pool in SPL"
        depends on SYS_MALLOC_F && SPL
+       default 0 if !SPL_FRAMEWORK
        default 0x2800 if RCAR_GEN3
        default SYS_MALLOC_F_LEN
        help
@@ -299,6 +313,7 @@ config TPL_SYS_MALLOC_F_LEN
 
 config VALGRIND
        bool "Inform valgrind about memory allocations"
+       depends on !RISCV
        help
          Valgrind is an instrumentation framework for building dynamic analysis
          tools. In particular, it may be used to detect memory management bugs
@@ -311,6 +326,16 @@ config VALGRIND
          it can be handled accurately by Valgrind. If you aren't planning on
          using valgrind to debug U-Boot, say 'n'.
 
+config VPL_SYS_MALLOC_F_LEN
+       hex "Size of malloc() pool in VPL before relocation"
+       depends on SYS_MALLOC_F && VPL
+       default SYS_MALLOC_F_LEN
+       help
+         Before relocation, memory is very limited on many platforms. Still,
+         we can provide a small malloc() pool if needed. Driver model in
+         particular needs this to operate, so that it can allocate the
+         initial serial device and any others that are needed.
+
 menuconfig EXPERT
        bool "Configure standard U-Boot features (expert users)"
        default y
@@ -488,6 +513,17 @@ config STACK_SIZE
          by the UEFI sub-system. On some boards initrd_high is calculated as
          base stack pointer minus this stack size.
 
+config SYS_MEM_TOP_HIDE
+       hex "Exclude some memory from U-Boot / OS information"
+       default 0x0
+       help
+         If set, this specified memory area will get subtracted from the top
+         (end) of RAM and won't get "touched" at all by U-Boot. By fixing up
+         gd->ram_size the OS / next stage should gets passed the now
+         "corrected" memory size and won't touch it either.
+         WARNING: Please make sure that this value is a multiple of the OS
+         page size.
+
 config SYS_HAS_SRAM
        bool
        default y if TARGET_PIC32MZDASK