string
option env="UBOOTVERSION"
-config KCONFIG_OBJDIR
- string
- option env="KCONFIG_OBJDIR"
-
-config DEFCONFIG_LIST
- string
- depends on !SPL_BUILD
- option defconfig_list
- default "configs/sandbox_defconfig"
+# Allow defaults in arch-specific code to override any given here
+source "arch/Kconfig"
menu "General setup"
-config SPL_BUILD
- bool
- depends on $KCONFIG_OBJDIR="spl" || $KCONFIG_OBJDIR="tpl"
+config LOCALVERSION
+ string "Local version - append to U-Boot release"
+ help
+ Append an extra string to the end of your U-Boot version.
+ This will show up on your boot log, for example.
+ The string you set here will be appended after the contents of
+ any files with a filename matching localversion* in your
+ object and source tree, in that order. Your total string can
+ be a maximum of 64 characters.
+
+config LOCALVERSION_AUTO
+ bool "Automatically append version information to the version string"
default y
+ help
+ This will try to automatically determine if the current tree is a
+ release tree by looking for git tags that belong to the current
+ top of tree revision.
-config TPL_BUILD
- bool
- depends on $KCONFIG_OBJDIR="tpl"
+ A string of the format -gxxxxxxxx will be added to the localversion
+ if a git-based tree is found. The string generated by this will be
+ appended after any matching localversion* files, and after the value
+ set in CONFIG_LOCALVERSION.
+
+ (The actual string used here is the first eight characters produced
+ by running the command:
+
+ $ git rev-parse --verify HEAD
+
+ which is done within the script "scripts/setlocalversion".)
+
+config CC_OPTIMIZE_FOR_SIZE
+ bool "Optimize for size"
default y
+ help
+ Enabling this option will pass "-Os" instead of "-O2" to gcc
+ resulting in a smaller U-Boot image.
+
+ This option is enabled by default for U-Boot.
+
+config SYS_MALLOC_F
+ bool "Enable malloc() pool before relocation"
+ default y if DM
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool before relocation"
+ depends on SYS_MALLOC_F
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
+menuconfig EXPERT
+ bool "Configure standard U-Boot features (expert users)"
+ default y
+ help
+ This option allows certain base U-Boot options and settings
+ to be disabled or tweaked. This is for specialized
+ environments which can tolerate a "non-standard" U-Boot.
+ Only use this if you really know what you are doing.
+
+if EXPERT
+ config SYS_MALLOC_CLEAR_ON_INIT
+ bool "Init with zeros the memory reserved for malloc (slow)"
+ default y
+ help
+ This setting is enabled by default. The reserved malloc
+ memory is initialized with zeros, so first malloc calls
+ will return the pointer to the zeroed memory. But this
+ slows the boot time.
+
+ It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN
+ value, has more than few MiB, e.g. when uses bzip2 or bmp logo.
+ Then the boot time can be significantly reduced.
+ Warning:
+ When disabling this, please check if malloc calls, maybe
+ should be replaced by calloc - if expects zeroed memory.
+endif
+endmenu # General setup
+
+menu "Boot images"
+
+config SUPPORT_SPL
+ bool
+
+config SUPPORT_TPL
+ bool
config SPL
bool
- prompt "Enable SPL" if !SPL_BUILD
- default y if SPL_BUILD
+ depends on SUPPORT_SPL
+ prompt "Enable SPL"
help
If you want to build SPL as well as the normal image, say Y.
-config TPL
+config SPL_SYS_MALLOC_SIMPLE
bool
depends on SPL
- prompt "Enable TPL" if !SPL_BUILD
- default y if TPL_BUILD
- default n
+ prompt "Only use malloc_simple functions in the spl"
+ help
+ Say Y here to only use the *_simple malloc functions from
+ malloc_simple.c, rather then using the versions from dlmalloc.c
+ this will make the SPL binary smaller at the cost of more heap
+ usage as the *_simple malloc functions do not re-use free-ed mem.
+
+config SPL_STACK_R
+ depends on SPL
+ bool "Enable SDRAM location for SPL stack"
+ help
+ SPL starts off execution in SRAM and thus typically has only a small
+ stack available. Since SPL sets up DRAM while in its board_init_f()
+ function, it is possible for the stack to move there before
+ board_init_r() is reached. This option enables a special SDRAM
+ location for the SPL stack. U-Boot SPL switches to this after
+ board_init_f() completes, and before board_init_r() starts.
+
+config SPL_STACK_R_ADDR
+ depends on SPL_STACK_R
+ hex "SDRAM location for SPL stack"
+ help
+ Specify the address in SDRAM for the SPL stack. This will be set up
+ before board_init_r() is called.
+
+config SPL_STACK_R_MALLOC_SIMPLE_LEN
+ depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE
+ hex "Size of malloc_simple heap after switching to DRAM SPL stack"
+ default 0x100000
+ help
+ Specify the amount of the stack to use as memory pool for
+ malloc_simple after switching the stack to DRAM. This may be set
+ to give board_init_r() a larger heap then the initial heap in
+ SRAM which is limited to SYS_MALLOC_F_LEN bytes.
+
+config SPL_SEPARATE_BSS
+ depends on SPL
+ bool "BSS section is in a different memory region from text"
+ help
+ Some platforms need a large BSS region in SPL and can provide this
+ because RAM is already set up. In this case BSS can be moved to RAM.
+ This option should then be enabled so that the correct device tree
+ location is used. Normally we put the device tree at the end of BSS
+ but with this option enabled, it goes at _image_binary_end.
+
+config TPL
+ bool
+ depends on SPL && SUPPORT_TPL
+ prompt "Enable TPL"
help
If you want to build TPL as well as the normal image and SPL, say Y.
+config FIT
+ bool "Support Flattened Image Tree"
+ help
+ This option allows to boot the new uImage structrure,
+ Flattened Image Tree. FIT is formally a FDT, which can include
+ images of various types (kernel, FDT blob, ramdisk, etc.)
+ in a single blob. To boot this new uImage structure,
+ pass the address of the blob to the "bootm" command.
+ FIT is very flexible, supporting compression, multiple images,
+ multiple configurations, verification through hashing and also
+ verified boot (secure boot using RSA). This option enables that
+ feature.
+
+config FIT_VERBOSE
+ bool "Display verbose messages on FIT boot"
+ depends on FIT
+
+config FIT_SIGNATURE
+ bool "Enable signature verification of FIT uImages"
+ depends on FIT
+ depends on DM
+ select RSA
+ help
+ This option enables signature verification of FIT uImages,
+ using a hash signed and verified using RSA. If
+ CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
+ hashing is available using hardware, then then RSA library will use
+ it. See doc/uImage.FIT/signature.txt for more details.
+
+ WARNING: When relying on signed FIT images with a required signature
+ check the legacy image format is disabled by default, so that
+ unsigned images cannot be loaded. If a board needs the legacy image
+ format support in this case, enable it using
+ CONFIG_IMAGE_FORMAT_LEGACY.
+
+config FIT_BEST_MATCH
+ bool "Select the best match for the kernel device tree"
+ depends on FIT
+ help
+ When no configuration is explicitly selected, default to the
+ one whose fdt's compatibility field best matches that of
+ U-Boot itself. A match is considered "best" if it matches the
+ most specific compatibility entry of U-Boot's fdt's root node.
+ The order of entries in the configuration's fdt is ignored.
+
+config FIT_VERBOSE
+ bool "Show verbose messages when FIT images fails"
+ depends on FIT
+ help
+ Generally a system will have valid FIT images so debug messages
+ are a waste of code space. If you are debugging your images then
+ you can enable this option to get more verbose information about
+ failures.
+
+config OF_BOARD_SETUP
+ bool "Set up board-specific details in device tree before boot"
+ depends on OF_LIBFDT
+ help
+ This causes U-Boot to call ft_board_setup() before booting into
+ the Operating System. This function can set up various
+ board-specific information in the device tree for use by the OS.
+ The device tree is then passed to the OS.
+
+config OF_SYSTEM_SETUP
+ bool "Set up system-specific details in device tree before boot"
+ depends on OF_LIBFDT
+ help
+ This causes U-Boot to call ft_system_setup() before booting into
+ the Operating System. This function can set up various
+ system-specific information in the device tree for use by the OS.
+ The device tree is then passed to the OS.
+
+config OF_STDOUT_VIA_ALIAS
+ bool "Update the device-tree stdout alias from U-Boot"
+ depends on OF_LIBFDT
+ help
+ This uses U-Boot's serial alias from the aliases node to update
+ the device tree passed to the OS. The "linux,stdout-path" property
+ in the chosen node is set to point to the correct serial node.
+ This option currently references CONFIG_CONS_INDEX, which is
+ incorrect when used with device tree as this option does not
+ exist / should not be used.
+
config SYS_EXTRA_OPTIONS
string "Extra Options (DEPRECATED)"
- depends on !SPL_BUILD
help
The old configuration infrastructure (= mkconfig + boards.cfg)
- provided the extra options field. It you have something like
+ provided the extra options field. If you have something like
"HAS_BAR,BAZ=64", the optional options
#define CONFIG_HAS
#define CONFIG_BAZ 64
configuration to Kconfig. Since this option will be removed sometime,
new boards should not use this option.
-endmenu # General setup
+config SYS_TEXT_BASE
+ depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
+ (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE
+ depends on !EFI_APP
+ hex "Text Base"
+ help
+ TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
-source "arch/Kconfig"
+config SPL_LOAD_FIT
+ bool "Enable SPL loading U-Boot as a FIT"
+ depends on FIT
+ help
+ Normally with the SPL framework a legacy image is generated as part
+ of the build. This contains U-Boot along with information as to
+ where it should be loaded. This option instead enables generation
+ of a FIT (Flat Image Tree) which provides more flexibility. In
+ particular it can handle selecting from multiple device tree
+ and passing the correct one to U-Boot.
+
+config SYS_CLK_FREQ
+ depends on ARC || ARCH_SUNXI
+ int "CPU clock frequency"
+ help
+ TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
+
+endmenu # Boot images
+
+source "common/Kconfig"
+
+source "cmd/Kconfig"
+
+source "dts/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "lib/Kconfig"
+
+source "test/Kconfig"