This can be used not only for 64bit SoCs, but also for
large physical address extension on 32bit SoCs.
+config HAS_ROM
+ bool
+ select BINMAN
+ help
+ Enables building of a u-boot.rom target. This collects U-Boot and
+ any necessary binary blobs.
+
+config ROM_NEEDS_BLOBS
+ bool
+ depends on HAS_ROM
+ help
+ Enable this if building the u-boot.rom target needs binary blobs, and
+ so cannot be done normally. In this case, U-Boot will only build the
+ ROM if the required blobs exist. If not, you will see an warning like:
+
+ Image 'main-section' is missing external blobs and is non-functional:
+ intel-descriptor intel-me intel-refcode intel-vga intel-mrc
+
config BUILD_ROM
bool "Build U-Boot as BIOS replacement"
- depends on X86
+ depends on HAS_ROM
+ default y if !ROM_NEEDS_BLOBS
help
This option allows to build a ROM version of U-Boot.
The build process generally requires several binary blobs
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
- default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+ default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
default "u-boot.kwb" if ARCH_KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "__start" if MIPS
default "_start"
+config STACK_SIZE
+ hex "Define max stack size that can be used by U-Boot"
+ default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP
+ default 0x200000 if MICROBLAZE
+ default 0x1000000
+ help
+ Define Max stack size that can be used by U-Boot. This value is used
+ by the UEFI sub-system. On some boards initrd_high is calculated as
+ base stack pointer minus this stack size.
+
+config SYS_HAS_SRAM
+ bool
+ default y if TARGET_PIC32MZDASK
+ default y if TARGET_DEVKIT8000
+ default y if TARGET_TRICORDER
+ default n
+ help
+ Enable this to allow support for the on board SRAM.
+ SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.
+ SRAM size is controlled by CONFIG_SYS_SRAM_SIZE.
+
+config SYS_SRAM_BASE
+ hex
+ default 0x80000000 if TARGET_PIC32MZDASK
+ default 0x40200000 if TARGET_DEVKIT8000
+ default 0x40200000 if TARGET_TRICORDER
+ default 0x0
+
+config SYS_SRAM_SIZE
+ hex
+ default 0x00080000 if TARGET_PIC32MZDASK
+ default 0x10000 if TARGET_DEVKIT8000
+ default 0x10000 if TARGET_TRICORDER
+ default 0x0
+
endmenu # General setup
menu "Boot images"
bool "Enable signature verification of FIT firmware within SPL"
depends on SPL_DM
select SPL_FIT
+ select SPL_CRYPTO_SUPPORT
+ select SPL_HASH_SUPPORT
select SPL_RSA
select SPL_RSA_VERIFY
select SPL_IMAGE_SIGN_INFO
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
+config SPL_LOAD_FIT_ADDRESS
+ hex "load address of fit image"
+ depends on SPL_LOAD_FIT
+ default 0x0
+ help
+ Specify the load address of the fit image that will be loaded
+ by SPL.
+
config SPL_LOAD_FIT_APPLY_OVERLAY
bool "Enable SPL applying DT overlays from FIT"
depends on SPL_LOAD_FIT
U-Boot FIT image. This could specify further image to load and/or
execute.
+config USE_SPL_FIT_GENERATOR
+ bool "Use a script to generate the .its script"
+ default y if SPL_FIT
+
config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
- depends on SPL_FIT
+ depends on USE_SPL_FIT_GENERATOR
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP