console: Always define the console-recording functions

[platform/kernel/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 566ca72..372425e 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -276,9 +276,28 @@ config PHYS_64BIT
          This can be used not only for 64bit SoCs, but also for
          large physical address extension on 32bit SoCs.
 
+config HAS_ROM
+       bool
+       select BINMAN
+       help
+         Enables building of a u-boot.rom target. This collects U-Boot and
+         any necessary binary blobs.
+
+config ROM_NEEDS_BLOBS
+       bool
+       depends on HAS_ROM
+       help
+         Enable this if building the u-boot.rom target needs binary blobs, and
+         so cannot be done normally. In this case, U-Boot will only build the
+         ROM if the required blobs exist. If not, you will see an warning like:
+
+           Image 'main-section' is missing external blobs and is non-functional:
+             intel-descriptor intel-me intel-refcode intel-vga intel-mrc
+
 config BUILD_ROM
        bool "Build U-Boot as BIOS replacement"
-       depends on X86
+       depends on HAS_ROM
+       default y if !ROM_NEEDS_BLOBS
        help
          This option allows to build a ROM version of U-Boot.
          The build process generally requires several binary blobs
@@ -302,7 +321,7 @@ config BUILD_TARGET
        default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
        default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
        default "u-boot-elf.srec" if RCAR_GEN3
-       default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+       default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
                                ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
        default "u-boot.kwb" if ARCH_KIRKWOOD
        default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
@@ -350,6 +369,41 @@ config PLATFORM_ELFENTRY
        default "__start" if MIPS
        default "_start"
 
+config STACK_SIZE
+       hex "Define max stack size that can be used by U-Boot"
+       default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP
+       default 0x200000 if MICROBLAZE
+       default 0x1000000
+       help
+         Define Max stack size that can be used by U-Boot. This value is used
+         by the UEFI sub-system. On some boards initrd_high is calculated as
+         base stack pointer minus this stack size.
+
+config SYS_HAS_SRAM
+       bool
+       default y if TARGET_PIC32MZDASK
+       default y if TARGET_DEVKIT8000
+       default y if TARGET_TRICORDER
+       default n
+       help
+         Enable this to allow support for the on board SRAM.
+         SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.
+         SRAM size is controlled by CONFIG_SYS_SRAM_SIZE.
+
+config SYS_SRAM_BASE
+       hex
+       default 0x80000000 if TARGET_PIC32MZDASK
+       default 0x40200000 if TARGET_DEVKIT8000
+       default 0x40200000 if TARGET_TRICORDER
+       default 0x0
+
+config SYS_SRAM_SIZE
+       hex
+       default 0x00080000 if TARGET_PIC32MZDASK
+       default 0x10000 if TARGET_DEVKIT8000
+       default 0x10000 if TARGET_TRICORDER
+       default 0x0
+
 endmenu                # General setup
 
 menu "Boot images"
@@ -526,6 +580,14 @@ config SPL_LOAD_FIT
          particular it can handle selecting from multiple device tree
          and passing the correct one to U-Boot.
 
+config SPL_LOAD_FIT_ADDRESS
+       hex "load address of fit image"
+       depends on SPL_LOAD_FIT
+       default 0x0
+       help
+         Specify the load address of the fit image that will be loaded
+         by SPL.
+
 config SPL_LOAD_FIT_APPLY_OVERLAY
        bool "Enable SPL applying DT overlays from FIT"
        depends on SPL_LOAD_FIT
@@ -577,9 +639,13 @@ config SPL_FIT_SOURCE
          U-Boot FIT image. This could specify further image to load and/or
          execute.
 
+config USE_SPL_FIT_GENERATOR
+       bool "Use a script to generate the .its script"
+       default y if SPL_FIT
+
 config SPL_FIT_GENERATOR
        string ".its file generator script for U-Boot FIT image"
-       depends on SPL_FIT
+       depends on USE_SPL_FIT_GENERATOR
        default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
        default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
        default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP