data). Avoiding heuristics is also important for security reasons;
if it looks funny, ignore it (or exit, or disconnect).
+Development
+===
+
+D-Bus uses Git as its version control system. The main repository is
+hosted at git.freedesktop.org/dbus/dbus. To clone D-Bus, execute the
+following command:
+
+ git clone git://git.freedesktop.org/dbus/dbus
+OR
+ git clone git.freedesktop.org:dbus/dbus
+
+The latter form is the one that allows pushing, but it also requires
+an SSH account on the server. The former form allows anonymous
+checkouts.
+
+D-Bus development happens in two branches in parallel: the current
+stable branch, with an even minor number (like 1.0, 1.2 and 1.4), and
+the next development branch, with the next odd number.
+
+The stable branch is named after the version number itself (dbus-1.2,
+dbus-1.4), whereas the development branch is simply known as "master".
+
+When making a change to D-Bus, do the following:
+
+ - check out the earliest branch of D-Bus that makes sense to have
+ your change in. If it's a bugfix, it's normally the current stable
+ branch; if it's a feature, it's normally the "master" branch. If
+ you have an important security fix, you may want to apply to older
+ branches too.
+
+ - for large changes:
+ if you're developing a new, large feature, it's recommended
+ to create a new branch and do your development there. Publish
+ your branch at a suitable place and ask others to help you
+ develop and test it. Once your feature is considered finalised,
+ you may merge it into the "master" branch.
+
+- for small changes:
+ . make your change to the source code
+ . execute tests to guarantee that you're not introducing a
+ regression. For that, execute: make check
+ (if possible, add a new test to check the fix you're
+ introducing)
+ . commit your change using "git commit"
+ in the commit message, write a short sentence describing what
+ you did in the first line. Then write a longer description in
+ the next paragraph(s).
+ . repeat the previous steps if necessary to have multiple commits
+
+ - extract your patches and send to the D-Bus mailing list for
+ review or post them to the D-Bus Bugzilla, attaching them to a bug
+ report. To extract the patches, execute:
+ git format-patch origin/master
+
+ - once your code has been reviewed, you may push it to the Git
+ server:
+ git push origin my-branch:remote
+ OR
+ git push origin dbus-X.Y
+ OR
+ git push origin master
+ (consult the Git manual to know which command applies)
+
+ - (Optional) if you've not worked on "master", merge your changes to
+ that branch. If you've worked on an earlier branch than the current
+ stable, merge your changes upwards towards the stable branch, then
+ from there into "master".
+
+ . execute: git checkout master
+ . ensure that you have the latest "master" from the server, update
+ if you don't
+ . execute: git merge dbus-X.Y
+ . if you have any conflicts, resolve them, git add the conflicted
+ files and then git commit
+ . push the "master" branch to the server as well
+
+ Executing this merge is recommended, but not necessary for all
+ changes. You should do this step if your bugfix is critical for the
+ development in "master", or if you suspect that conflicts will arise
+ (you're usually the best person to resolve conflicts introduced by
+ your own code), or if it has been too long since the last merge.
+
+
Making a release
===
To make a release of D-Bus, do the following:
- - check out a fresh copy from CVS
+ - check out a fresh copy from Git
- verify that the libtool versioning/library soname is
changed if it needs to be, or not changed if not
- - update the file NEWS based on the ChangeLog
-
- - update the AUTHORS file based on the ChangeLog
+ - update the file NEWS based on the git history
- - add a ChangeLog entry containing the version number
- you're releasing ("Released 0.3" or something)
- so people can see which changes were before and after
- a given release
+ - update the AUTHORS file with "make update-authors" if necessary
- - the version number should have major.minor.micro even
- if micro is 0, i.e. "1.0.0" and "1.2.0" not "1.0"/"1.2"
+ - the version number should have major.minor.micro, even
+ if micro is 0, i.e. "1.0.0" and "1.2.0" not "1.0"/"1.2"; the micro
+ version should be even for releases, and odd for intermediate snapshots
- "make distcheck" (DO NOT just "make dist" - pass the check!)
- if make distcheck fails, fix it.
- - once distcheck succeeds, "git-commit -a". This is the version
+ - once distcheck succeeds, "git commit -a". This is the version
of the tree that corresponds exactly to the released tarball.
- - tag the tree with "git-tag -s -m 'Released X.Y.Z' dbus-X.Y.Z"
+ - tag the tree with "git tag -s -m 'Released X.Y.Z' dbus-X.Y.Z"
where X.Y.Z is the version of the release. If you can't sign
- then simply created an unannotated tag: "git-tag dbus-X.Y.Z".
+ then simply created an unsigned annotated tag:
+ "git tag -a -m 'Released X.Y.Z' dbus-X.Y.Z".
- - bump the version number up in configure.in, and commit
- it. Make sure you do this *after* tagging the previous
+ - bump the version number up in configure.in (so the micro version is odd),
+ and commit it. Make sure you do this *after* tagging the previous
release! The idea is that git has a newer version number
than anything released.
- - push your changes to the central repository with "git-push"
+ - merge the branch you've released to the chronologically-later
+ branch (usually "master"). You'll probably have to fix a merge
+ conflict in configure.in (the version number).
- - push your new tag, too: "git-push origin dbus-X.Y.Z"
+ - push your changes and the tag to the central repository with
+ git push origin master dbus-X.Y dbus-X.Y.Z
- - scp your tarball to freedesktop.org server and copy it
- to /srv/dbus.freedesktop.org/www/releases/dbus. This should
- be possible if you're in group "dbus"
+ - scp your tarball to freedesktop.org server and copy it to
+ dbus.freedesktop.org:/srv/dbus.freedesktop.org/www/releases/dbus/dbus-X.Y.Z.tar.gz.
+ This should be possible if you're in group "dbus"
+
+ - Update the online documentation with `make -C doc maintainer-upload-docs`.
- update the wiki page http://www.freedesktop.org/Software/dbus by
adding the new release under the Download heading. Then, cut the
After making a ".0" stable release
===
-After releasing, when you increment the version number in git, also
-move the ChangeLog to ChangeLog.pre-X-Y where X-Y is what you just
-released, e.g. ChangeLog.pre-1-0. Then create and cvs add a new empty
-ChangeLog. The last entry in ChangeLog.pre-1-0 should be the one about
-"Released 1.0".
-
-Add ChangeLog.pre-X-Y to EXTRA_DIST in Makefile.am.
-
We create a branch for each stable release; sometimes the branch is
not done immediately, instead it's possible to wait until someone has
a not-suitable-for-stable change they want to make and then branch to
allow committing that change.
-The branch name should be dbus-X.Y-branch which is a branch that has
+The branch name should be dbus-X.Y which is a branch that has
releases versioned X.Y.Z
To branch:
- git branch dbus-X.Y-branch
+ git branch dbus-X.Y
and upload the branch tag to the server:
- git-push origin dbus-X.Y-branch
+ git push origin dbus-X.Y
To develop in this branch:
- git-checkout dbus-X.Y-branch
+ git checkout dbus-X.Y
Environment variables
===
"make check" runs all the deterministic test programs (i.e. not break-loader).
-"make check-coverage" is available if you configure with --enable-gcov and
-gives a complete report on test suite coverage. You can also run
-"test/decode-gcov foo.c" on any source file to get annotated source,
-after running make check with a gcov-enabled tree.
+"make lcov-check" is available if you configure with --enable-compiler-coverage
+and gives a complete report on test suite coverage.
Patches
===
No reviewer should approve a patch without these attributes, and
failure on these points is grounds for reverting the patch.
-The reviewer group that can approve patches: Havoc Pennington, Michael
-Meeks, Alex Larsson, Zack Rusin, Joe Shaw, Mikael Hallendal, Richard
-Hult, Owen Fraser-Green, Olivier Andrieu, Colin Walters, Thiago
-Macieira, John Palmieri, Scott James Remnant.
+The reviewer group that can approve patches:
+
+Havoc Pennington <hp@pobox.net>
+Michael Meeks <michael.meeks@novell.com>
+Alexander Larsson <alexl@redhat.com>
+Zack Rusin <zack@kde.org>
+Joe Shaw <joe@assbarn.com>
+Mikael Hallendal <micke@imendio.com>
+Richard Hult <richard@imendio.com>
+Owen Fraser-Green <owen@discobabe.net>
+Olivier Andrieu <oliv__a@users.sourceforge.net>
+Colin Walters <walters@verbum.org>
+Thiago Macieira <thiago@kde.org>
+John Palmieri <johnp@redhat.com>
+Scott James Remnant <scott@netsplit.com>
+Will Thompson <will.thompson@collabora.co.uk>
+Simon McVittie <simon.mcvittie@collabora.co.uk>
+