- interrupts: interrupt number to the cpu.
Optional properties:
-- dma-coherent : Present if dma operations are coherent
+ - dma-coherent : Present if dma operations are coherent
+ - #dma-cells: must be <1>. used to represent the number of integer
+ cells in the dmas property of client device.
+ - dma-channels: contains the total number of DMA channels supported by the DMAC
+ - dma-requests: contains the total number of DMA requests supported by the DMAC
Example:
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <99>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers using a two-value pair
+mem-to-dev) should specify the DMA channel numbers and dma channel names
as shown below.
[property name] = <[phandle of the dma controller] [dma request id]>;
+ [property name] = <[dma channel name]>
where 'dma request id' is the dma request number which is connected
- to the client controller. The 'property name' is recommended to be
- of the form <name>-dma-channel.
+ to the client controller. The 'property name' 'dmas' and 'dma-names'
+ as required by the generic dma device tree binding helpers. The dma
+ names correspond 1:1 with the dma request ids in the dmas property.
- Example: tx-dma-channel = <&pdma0 12>;
+ Example: dmas = <&pdma0 12
+ &pdma1 11>;
+ dma-names = "tx", "rx";