+=== release 1.16.0 ===
+
+2019-04-19 00:15:21 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * README:
+ * RELEASE:
+ * configure.ac:
+ * gstreamer.doap:
+ * meson.build:
+ Release 1.16.0
+
+2019-04-19 00:15:21 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * docs/plugins/inspect/plugin-coretracers.xml:
+ Update docs
+
+2019-04-19 00:15:19 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * po/zh_CN.po:
+ Update translations
+
+2019-04-18 10:13:51 +0200 Olivier Crête <olivier.crete@collabora.com>
+
+ * libs/gst/base/gstbasesrc.c:
+ basesrc: Downgrade EOS warning
+ In the case of pushfilesrc, this is the expected behaviour, so let's
+ downgrade the warning to a debug message to avoid confusing users.
+
+2019-04-17 20:46:58 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * tests/check/libs/basesrc.c:
+ tests: basesrc: unref gst_bus_timed_pop_filtered return
+
+2019-04-16 13:29:00 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * gst/gst.c:
+ * gst/gst_private.h:
+ * gst/gstinfo.c:
+ gstinfo: clean up function pointer names hashtable
+ And add strduped function pointer names to the global quark
+ table, so that they don't get reported as lost by valgrind.
+ This allows us to use GST_DEBUG when running tests under
+ valgrind.
+
+2019-04-16 23:50:15 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: fix doc chunk for new buffer-consumed signal
+ Fixes 'Warning: GstBase: incorrect number of parameters in
+ comment block, parameter annotations will be ignored.' from
+ g-ir-scanner.
+
+2019-04-12 09:23:52 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Don't compare element name as element Id is already unique
+
+2019-04-12 08:38:03 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Remove redundant if conditions
+
+2019-04-12 08:34:49 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Make GST_DEBUG logs consistent
+
+2019-04-12 08:28:22 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Fix bug when dropping sub-latency probe event
+ Fixes #373
+
+2019-04-12 16:37:18 +0200 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * gst/gstevent.c:
+ event: fix seek event creation
+ Creating seek events segfaults on 32-bit ARM since commit 2fa15d53717c
+ ('event: add new seek parameter, "trickmode-interval"'), which missed
+ casting the trickmode-interval initializer in the variable argument list
+ to guint64.
+
+2019-04-11 15:32:51 -0400 Xavier Claessens <xavier.claessens@collabora.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Do not print warning if 'less' is missing
+
+=== release 1.15.90 ===
+
+2019-04-11 00:19:11 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * gstreamer.doap:
+ * meson.build:
+ Release 1.15.90
+
+2019-04-11 00:19:11 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * docs/plugins/inspect/plugin-coretracers.xml:
+ Update docs
+
+2019-04-10 09:17:01 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Fix typo bug
+
+2019-04-10 09:13:53 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Fix bug when storing latency probe event
+ The pad name sotred in the latency event has no longer the name of the element,
+ so we have to get the element Id, element name and pad name values from the data
+ structure and compare all 3 values.
+
+2019-04-10 10:18:54 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstcontrolbinding.c:
+ controlbinding: Check if the weak pointer was cleared before explicitly removing it
+ Otherwise we'll get an assertion if the object behind the weak pointer
+ was already destroyed in the meantime as we would pass NULL as first
+ argument to g_object_remove_weak_pointer().
+
+2019-04-09 08:05:09 -0400 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ * tools/gst-stats.c:
+ tracer: latency: Show element id, element name and pad name
+
+2019-03-25 15:36:08 +0100 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * tools/gst-stats.c:
+ gst-stats: Add element latency support
+ This will output latency information when parsing a log file with gst-stats that
+ has latency trace information. It will show the min, max and mean latency for
+ the pipeline and all its elements. It will also show the reported latency for
+ each element of the pipeline. Output example:
+ Latency Statistics:
+ pulsesrc0_src|fakesink0_sink: mean=190000043 min=190000043 max=190000043
+ Element Latency Statistics:
+ flacparse0_src: mean=45561281 min=654988 max=90467575
+ flacenc0_src: mean=89938883 min=81913512 max=97964254
+ flacdec0_src: mean=45804881 min=228962 max=91380801
+ Element Reported Latency:
+ pulsesrc0: min=10000000 max=200000000 ts=0:00:00.262846528
+ flacenc0: min=104489795 max=104489795 ts=0:00:00.262898616
+ flacparse0: min=0 max=0 ts=0:00:00.262927962
+
+2019-03-21 10:37:34 +0100 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ * plugins/tracers/gstlatency.h:
+ tracer: latency: Show per-element reported latency
+
+2019-03-20 12:20:48 +0100 Julian Bouzas <julian.bouzas@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Show element's source pad name instead of element's name
+ The full pad name gives more information than the element's name, which is very
+ useful when elements have multiple source pads.
+
+2019-03-18 21:55:50 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ latency: Dot not override already stored events
+ First, the event would be leaved, but also when an element takes
+ several buffers before producing one, we want the reported latency to be
+ the aggregation, so the distance from the oldest buffer.
+
+2018-10-31 16:50:48 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ * plugins/tracers/gstlatency.h:
+ tracer: latency: Add parameter to select latency type
+ This sets back the default to trace only pipeline latency, and add flags
+ to enabled element tracing. It is now possible to only trace element
+ latency, only trace pipeline latency, trace both or none.
+
+2018-07-06 17:08:24 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: latency: Add per element latency tracer
+ This adds per element latency tracing.
+
+2018-07-04 14:18:42 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * plugins/tracers/gstlatency.c:
+ tracer: Don't pass pads inside GstEvent
+ This removes the passing of pad inside of a GstEvent. While this is not
+ a bug, it may affect the live time of the pad, hense change the pipeline
+ behaviour.
+
+2018-11-13 21:19:22 +0100 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstbasesrc.c:
+ * tests/check/libs/basesrc.c:
+ basesrc: do not send EOS when automatic_eos is FALSE
+
+2019-04-01 12:22:49 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: add buffer-consumed pad signal
+ The signal will be emitted when a buffer was consumed on
+ a pad, if the newly-added "emit-signals" property has been
+ set to TRUE.
+ Handlers connected to the signal will receive a valid reference on
+ the consumed buffer, allowing for example the retrieval of metas in
+ order to forward them once an output buffer is pushed out.
+
+2019-04-05 11:43:53 +0200 Antonio Ospite <antonio.ospite@collabora.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: fix printing the first field of a GstStructure
+ When printing a GstStructure property (e.g. the "stats" property in
+ rtpsession) the first field is printed on the same line of the type
+ description, and this is both inconsistent compared to how Enum values
+ are printed and confusing as the reader might miss the first field.
+ To fix this, add a newline before printing GstStructure fields in
+ properties.
+ NOTE: this does not change the existing inconsistent behavior of an
+ extra newline *after* a GstStructure property, but the latter is not as
+ annoying and it would take more effort to fix because GstStructure
+ fields are printed in CAPS descriptions too.
+
+2019-04-01 18:34:07 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstevent.c:
+ * gst/gstevent.h:
+ * gst/gstquark.c:
+ * gst/gstquark.h:
+ * tests/check/gst/gstevent.c:
+ event: add new seek parameter, "trickmode-interval"
+ When performing a key unit trickmode seek, it may be useful to
+ specify a minimum interval between the output frames, either
+ in very high rate cases, or as a protection against streams
+ that may contain an overly large amount of key frames.
+ One use case is ONVIF Section 6.5.3:
+ <https://www.onvif.org/specs/stream/ONVIF-Streaming-Spec.pdf>
+
+2019-03-22 17:46:03 +0100 Antonio Ospite <antonio.ospite@collabora.com>
+
+ * tests/check/gstreamer.supp:
+ tests: add the valgrind suppression file from the "common" module
+ Other gstreamer repositories have their own valgrind suppression file
+ directly in the repository.
+ Add a suppression file to the core gstreamer repository too, this makes
+ it easier to use it with gst-build which does not check out the common
+ module.
+ This is also a little step towards the removal of the common submodule.
+ NOTE: the added file is the latest version from the "common" repository
+ but it has been renamed from gst.supp to gstreamer.supp for symmetry
+ with the suppression files in the other repositories.
+
+2019-03-23 18:31:42 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ g-i: pass --quiet to g-ir-scanner
+ This suppresses the annoying 'g-ir-scanner: link: cc ..' output
+ that we get even if everything works just fine.
+ We still get g-ir-scanner warnings and compiler warnings if
+ we pass this option.
+
+2019-03-23 18:17:43 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/check/gstcheck.c:
+ check: suppress some g-i warnings
+ gstcheck.c:142: Warning: GstCheck: gst_check_add_log_filter: return value: Invalid non-constant return of bare structure or union; register as boxed type or (skip)
+ gstcheck.h:178: Warning: GstCheck: gst_check_run_suite: argument suite: Unresolved type: 'Suite*'
+
+2019-03-23 17:53:54 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ g-i: silence 'nested extern' compiler warnings when building scanner binary
+ We need a nested extern in our init section for the scanner binary
+ so we can call gst_init to make sure GStreamer types are initialised
+ (they are not all lazy init via get_type functions, but some are in
+ exported variables). There doesn't seem to be any other mechanism to
+ achieve this, so just remove that warning, it's not important at all.
+
+2019-03-23 17:53:07 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstbitwriter.c:
+ bitwriter: mark as 'skip' for gobject-introspection
+ Silences g-ir-scanner warnings. We do the same for ByteWriter.
+
+2019-03-21 18:55:16 +1100 Matthew Waters <matthew@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: don't leak gap buffer when out of segment
+
+2019-03-21 18:47:04 +1100 Matthew Waters <matthew@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: take the pad lock around queue gap event removal
+ As is done for every other queue interaction
+
+2019-03-20 17:43:02 +1100 Matthew Waters <matthew@centricular.com>
+
+ * libs/gst/base/gstbaseparse.c:
+ baseparse: don't reset the disable-passthrough property value
+ Resetting as a result of _reset() on PAUSED->READY is unexpected.
+
+2019-03-14 11:59:43 +0100 Stephane Cerveau <scerveau@fluendo.com>
+
+ * gst/gstelement.c:
+ gst_element_get_factory: update documentation
+ Inform about a potential NULL result.
+
+2019-03-13 18:46:14 +0100 Stephane Cerveau <scerveau@fluendo.com>
+
+ * gst/gstelementfactory.c:
+ gst_element_factory_get_metadata: protect from null factory
+
+2019-03-12 21:19:23 +0000 Damian Vicino <sdavtaker@gmail.com>
+
+ * README:
+ Update README
+
+2019-03-12 20:12:37 +0000 Damian Vicino <sdavtaker@gmail.com>
+
+ * README:
+ Update README to have correct name of the license file documented (COPYING). There is no LICENSE file in the root directory, and COPYING file content is a license file.
+
+2019-03-10 15:35:39 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * tests/check/meson.build:
+ tests: fdsrc: Exclude unit test on Windows
+ Since elements_fdsrc.test_num_buffers uses blocking pipe on Windows,
+ the test will never be finished. But emulating non-blocking fd without
+ win32 APIs on Windows is a little tricky.
+
+2019-03-08 16:19:29 +0100 Santiago Carot-Nemesio <scarot@twilio.com>
+
+ * gst/gsttaskpool.c:
+ gsttaskpool: Do not block tasks while cleaning up the taskpool
+ There is a deadlock if any thread from the pool tries to push
+ a new task while other thread is waiting for the pool of threads
+ to finish. With this patch the thread will get an error when it
+ tries to add a new task while the taskpool is being cleaned up.
+
+2019-03-06 19:46:46 +0100 Marco Trevisan (Treviño) <mail@3v1n0.net>
+
+ * gst/gsturi.c:
+ gsturi: Fix annotation on get_path to return a nullable
+ Use proper syntax or the (nullable): part will be part of the description
+
+2019-03-06 19:34:12 +0100 Marco Trevisan (Treviño) <mail@3v1n0.net>
+
+ * gst/gstmessage.c:
+ gstmessage: Fix annotations on details
+ Details argument should be nullable, but the docstring uses a wrong syntax.
+
+2019-03-06 09:04:54 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/gst/gstbuffer.c:
+ tests: fix leak in buffer test_wrapped_bytes test
+
+2019-03-01 11:59:14 +0100 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * gst/gstbuffer.c:
+ * tests/check/gst/gstmeta.c:
+ gstbuffer: store meta in add order
+ The previous implementation of add was implemented as a prepend,
+ switch to append as that seems like the expected order.
+
+2019-03-04 09:01:07 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * docs/plugins/inspect/plugin-coretracers.xml:
+ * meson.build:
+ Back to development
+
+2019-02-28 16:48:57 +0100 Santiago Carot-Nemesio <sancane@gmail.com>
+
+ * gst/gsttaskpool.c:
+ taskpool: Set error in case something goes wrong in the default handlers
+
+=== release 1.15.2 ===
+
+2019-02-26 11:38:00 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * gstreamer.doap:
+ * meson.build:
+ Release 1.15.2
+
+2019-02-26 13:23:47 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/parse/Makefile.am:
+ meson: dist get_flex_version.py
+
+2019-02-26 11:38:00 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * docs/plugins/inspect/plugin-coretracers.xml:
+ Update docs
+
+2019-02-26 11:37:57 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * po/af.po:
+ * po/ast.po:
+ * po/az.po:
+ * po/be.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/fur.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/rw.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_TW.po:
+ Update translations
+
+2019-02-25 13:49:43 +0100 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * gst/gstplugin.c:
+ plugin: add 0BSD as valid license
+ Add the zero-clause BSD license, which is an alteration of the ISC
+ license, to the list of valid licenses.
+
+2019-02-25 13:48:38 +0100 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * gst/gstplugin.c:
+ plugin: fix link to 3-clause BSD license
+ The current link points to the 2-clause BSD license,
+ explicitly link to the 3-clause version of the license.
+
+2019-02-20 17:51:40 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * gst/gstmacros.h:
+ gstmacros.h: Fix restrict definition on MSVC
+ Turns out it's exposed as `__restrict`, not as `restrict`.
+ https://gitlab.freedesktop.org/gstreamer/gstreamer/merge_requests/95#note_120782
+
+2019-02-20 01:25:11 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * gst/gstmacros.h:
+ gstmacros.h: Fix check for 'restrict' keyword
+ MSVC also defines it as a keyword. Fixes build errors in projects that
+ include MSVC's xkeycheck.h which ensures that keywords aren't overriden
+ with a define.
+
+2019-02-18 09:58:19 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * gst/gstbuffer.c:
+ buffer: Don't miss return value on Windows build
+ ... and use InterlockedExchangeAdd64 for the 64bit value.
+ InterlockedExchangeAdd is 32bit version.
+
+2019-02-15 13:23:37 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstbus.c:
+ bus: Make removing of signal/bus watches thread-safe
+ Between getting the GSource with the mutex and destroying it, something
+ else might've destroyed it already and we would have a dangling pointer.
+ Keep an additional reference just in case.
+
+2019-02-15 13:20:27 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstbus.c:
+ bus: Don't allow removing signal watches with gst_bus_remove_watch()
+ Signal watches are reference counted and gst_bus_remove_watch() would
+ immediately remove it, breaking the reference counting. Only
+ gst_bus_remove_signal_watch() should be used for removing signal
+ watches.
+
+2019-02-11 15:21:21 +1300 Lawrence Troup <lawrence.troup@teknique.com>
+
+ * gst/gstpad.c:
+ * gst/gstpad.h:
+ pad: Document that pad unlink function is called with pad lock held
+ Fixes #353
+
+2016-12-02 17:56:59 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gst_private.h:
+ * gst/gstbuffer.c:
+ * gst/gstmeta.c:
+ * gst/gstmeta.h:
+ * tests/check/gst/gstmeta.c:
+ buffer: store sequence number for metas
+ For metas where order might be significant if multiple metas are
+ attached to the same buffer, so store a sequence number with the
+ meta when adding it to the buffer. This allows users of the meta
+ to make sure metas are processed in the right order.
+ We need a 64-bit integer for the sequence number here in the API,
+ a 32-bit one might overflow too easily with high packet/buffer
+ rates. We could do it rtp-seqnum style of course, but that's a
+ bit of a pain.
+ We could also make it so that gst_buffer_add_meta() just keeps metas in
+ order or rely on the order we add the metas in, but that seems too
+ fragile overall, when buffers (incl. metas) get merged or split.
+ Also add a compare function for easier sorting.
+ We store the seqnum in the MetaItem struct here and not in the
+ GstMeta struct since there's no padding in the GstMeta struct.
+ We could add a private struct to GstMeta before the start of
+ GstMeta, but that's what MetaItem effectively is implementation-
+ wise. We can still change this later if we want, since it's all
+ private.
+ Fixes #262
+
+2019-02-09 11:35:59 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstdeviceprovider.c:
+ deviceprovider: It's (transfer none) not (transfer-none)
+
+2019-01-30 10:41:58 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstdevicemonitor.c:
+ * gst/gstdeviceprovider.c:
+ * gst/gstdeviceprovider.h:
+ * gst/gstmessage.c:
+ * gst/gstmessage.h:
+ * gst/gstquark.c:
+ * gst/gstquark.h:
+ device-provider: Allow notifying application of device changes
+ Thi introduces new APIs to post a `DEVICE_CHANGED` message on the
+ bus so the application is notifies when a device is modified. For
+ example, if the "defaultness" of a device was changed or any property
+ that can be changed at any time. Atomically changing the device
+ object notifying that way allow us to abtract away the internal threads.
+ New APIS:
+ - gst_message_new_device_changed
+ - gst_message_parse_device_changed
+ - gst_device_provider_device_changed
+
+2019-02-08 16:42:43 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * gst/parse/get_flex_version.py:
+ * gst/parse/meson.build:
+ meson: Extract flex version using a regex inside a script
+ Different builds of Flex on different platforms output different strings
+ in --version. For example:
+ macOS:
+ flex 2.5.35 Apple(flex-31)
+ Windows:
+ win_flex.exe 2.6.4
+ C:\Program Files (x86)\GnuWin32\bin\flex.EXE version 2.5.4
+ We need to look for a string that looks like a version, which means
+ a regex till https://github.com/mesonbuild/meson/issues/1609 is fixed.
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/356
+
+2019-02-05 18:18:48 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * libs/gst/check/gstharness.c:
+ * tests/check/gst/gstmeta.c:
+ * tools/gst-inspect.c:
+ misc: Fix various compiler warnings on MinGW
+ gstharness.c: Use G_GSIZE_FORMAT instead of hard-coding %zu
+ error: unknown conversion type character 'z' in format [-Werror=format]
+ gst-inspect.c: GPid is void* on non-UNIX, and we only use it on UNIX
+ error: initialization makes pointer from integer without a cast [-Werror]
+ gstmeta.c: Use and then discard value
+ error: value computed is not used [-Werror=unused-value]
+ With this, gstreamer builds with -Werror on MinGW
+
+2019-01-29 16:26:49 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstdatetime.c:
+ datetime: new() and new_local_time() constructors are not nullable
+
+2019-01-29 15:50:06 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Constructors are all not nullable
+ They can't possibly return NULL except in case of assertions.
+
+2019-01-29 15:49:50 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpadtemplate.c:
+ padtemplate: Constructors are all nullable as they check the template name
+
+2019-01-29 12:01:59 +0100 Edward Hervey <edward@centricular.com>
+
+ * tests/check/libs/baseparse.c:
+ test: Set PTS on proper variable
+ This would previously set the PTS on a random address causing various
+ memory corruption
+
+2019-01-25 02:36:18 +0100 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * gst/gstinfo.c:
+ * meson.build:
+ * meson_options.txt:
+ gstinfo: add Windows stacktraces support
+ This uses the DbgHelp library if available
+
+2019-01-25 13:46:59 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * gst/gstpad.c:
+ pad: Remove unneeded 64bit upcast in debug trace
+ The hook->hook_id is a gulong for which there are no portability issues
+ when tracing in printf format with %lu. So use %lu and remove the upcast
+ to 64 bit. This makes the code more consistent with everything else
+ tracing that hook_id and other gulong id.
+
+2019-01-24 13:52:46 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Re-add DEFAULT_LESS_OPTS with initial value
+ Commit 56b4fbef5e6760adc927d0e1c7c8d6a0db9b785c refactored the pipe code
+ to use GLib utility, but the patch was hading some other changed. LESS
+ env was now hardcoded in the middle instead of from a define and was
+ changed from FXR to -RX. The "-" is not even valid for LESS env, and
+ with the lost of F, we would still use a pager when the content fits the
+ terminal.
+
+2019-01-23 13:51:08 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gsttaglist.c:
+ taglist: Remove (scope call) annotation from gst_tag_register()
+ This was added in 7fdb15d6a2 but it is wrong. (scope call) is for
+ closures that only have to stay valid for the scope of the call, but the
+ tag merge function has to stay valid for the whole lifetime of the
+ application instead.
+ There's no appropriate scope annotation for that so we have to skip
+ these functions for now.
+
+2019-01-23 12:15:13 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * tests/check/gst/gstinfo.c:
+ tests: info: Fix spurious validation
+ Should be equality check, not assignment.
+ Additionally, use fail_unless_equals_* macro for better readability
+ and debugging easier, if possible.
+
+2019-01-23 21:15:09 +0100 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * gst/parse/meson.build:
+ meson: improve flex version parsing
+ the output of flex --version can contain more than one space
+
+2019-01-22 14:05:43 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * meson.build:
+ meson: Correct minimum required GLib version
+ It's updated to 2.40.0 since the commit 3e8ef4cf5a41e26836f0a5a8cb3ddaa5e55f1524
+
+2019-01-17 11:22:27 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Don't setup pager too early
+ Setup it only if we have something to print out about inspected results.
+ Otherwise, gst_tools_print_version() output will be redirected to pager and also
+ exit immediately without waiting child process.
+
+2019-01-08 21:23:44 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Port to Glib's spawn API
+ Although we support pager just for *nix until now,
+ this can make more portable to Windows.
+ Fixes #342
+
+=== release 1.15.1 ===
+
+2019-01-17 01:38:59 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * gstreamer.doap:
+ * meson.build:
+ Release 1.15.1
+
+2019-01-17 01:38:59 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/plugins/gstreamer-plugins.args:
+ * docs/plugins/gstreamer-plugins.hierarchy:
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * docs/plugins/inspect/plugin-coretracers.xml:
+ Update docs
+
+2019-01-17 01:38:49 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * po/af.po:
+ * po/ast.po:
+ * po/az.po:
+ * po/be.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/fur.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/rw.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_TW.po:
+ Update translations
+
+2019-01-17 01:30:25 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Fix ANSI escape sequence usage on Windows
+ Either disable it when it's not supported, or setup the console to
+ interpret them correctly when it's supported.
+ Closes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/351
+
+2019-01-15 18:05:31 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Fix printf format when printing hook id
+ It's a gulong so we have to cast it to a guint64 when using it with
+ G_GUINT64_FORMAT.
+ Spotted by Vincent Penvern.
+
+2019-01-14 16:22:16 +0800 Daniel Drake <drake@endlessm.com>
+
+ * gst/gstdeviceprovider.c:
+ deviceprovider: fix counting number of times started
+ GstDeviceProvider has a started_count private variable counter,
+ and the gst_device_provider_start() documentation emphasizes the
+ importance of balancing the start and stop calls.
+ However, when starting a provider that is already started, the
+ current code will never increment the counter more than once.
+ So you start it twice, but it will have start_count 1, which is the
+ maximum value it will ever see.
+ Then when you stop it twice, on the 2nd stop, after decrementing the
+ counter in gst_device_provider_stop():
+ else if (provider->priv->started_count < 1) {
+ g_critical
+ ("Trying to stop a GstDeviceProvider %s which is already stopped",
+ GST_OBJECT_NAME (provider));
+ and the program is killed.
+ Fix this by incrementing the counter when starting a device provider that
+ was already started.
+
+2019-01-11 12:32:49 +0200 Jordan Petridis <jordan@centricular.com>
+
+ * tests/check/gst/gstdatetime.c:
+ tests: gstdatetime: move gst_date_time_new* and time() calls closer
+ While extremelly rare, time and gst_date_time_new_* will have
+ diff values and potentially trigger an assertion. Thus move
+ the calls as closely together as possible to mitigate this.
+
+2019-01-10 12:05:34 +0000 Sebastian Dröge <slomo@coaxion.net>
+
+ * gst/gstbin.c:
+ Revert "bin: Hold the state lock while removing elements from a bin"
+ This reverts commit 7f70d7a9450b321585fbfd1eb977548d4264b2a6
+
+2019-01-09 14:01:02 +0100 Jan Alexander Steffens (heftig) <jsteffens@make.tv>
+
+ * tests/check/gst/gststructure.c:
+ tests: Add more int range fixation tests
+
+2019-01-09 13:38:44 +0100 Jan Alexander Steffens (heftig) <jsteffens@make.tv>
+
+ * gst/gststructure.c:
+ structure: Support stepped ranges when fixating
+ The step restriction was completely ignored until now.
+
+2019-01-09 13:37:30 +0100 Jan Alexander Steffens (heftig) <jsteffens@make.tv>
+
+ * gst/gststructure.c:
+ structure: Use GLib's CLAMP macro for fixating ranges
+ Just a bit of refactoring.
+
+2019-01-07 14:08:25 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstelement.c:
+ element: Add note about racyness to gst_element_set_locked_state()
+ This is racy if the state lock of the parent bin is not taken. The
+ parent bin might've just checked the flag in another thread and as the
+ next step proceed to change the child element's state.
+
+2019-01-07 14:08:00 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstbin.c:
+ bin: Hold the state lock while removing elements from a bin
+ We need to take the state lock here to ensure that we're
+ not currently just before setting the state of this child
+ element. Otherwise it can happen that we removed the element
+ here and e.g. set it to NULL state, and shortly afterwards
+ have another thread set it to a higher state again as part of
+ a state change for the whole bin.
+ When adding an element to the bin this is not needed as we
+ require callers to always ensure after adding to the bin that
+ the new element is set to the correct state.
+
+2019-01-05 18:55:12 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: fix typo in docs
+
+2019-01-02 23:35:11 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/gst/gstpipeline.c:
+ pipeline: Call gst_task_cleanup_all() before checking reference counts after shutdown
+ We have to ensure that all background threads from thread pools are shut
+ down, or otherwise they might not have had a chance yet to drop their
+ last reference to the pipeline and then the assertion for a reference
+ count of 1 on the pipeline fails.
+
+2019-01-02 18:41:24 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/gst/gstpipeline.c:
+ pipeline: Use the test clock in all unit tests
+ And check for exact times as we can now do that thanks to the test clock
+ being deterministic.
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/313
+
+2018-09-26 17:09:50 +0200 Michael Olbrich <m.olbrich@pengutronix.de>
+
+ * libs/gst/helpers/gst_gdb.py:
+ gdb: implement 'gst-dot' and 'gst-print' commands
+ This adds two custom gdb commands:
+ 'gst-dot' creates dot files that a very close to what
+ GST_DEBUG_BIN_TO_DOT_FILE() produces. Object properties and buffer content
+ (e.g. codec-data in caps) are not available.
+ 'gst-print' produces high-level information about GStreamer objects. This
+ is currently limited to pads for GstElements and events for the pads. The
+ output can look like this:
+ (gdb) gst-print pad.object.parent
+ GstMatroskaDemux (matroskademux0) {
+ SinkPad (sink, pull) {
+ }
+ SrcPad (video_0, push) {
+ events:
+ stream-start:
+ stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/001:1274058367
+ caps: video/x-theora
+ width: 1920
+ height: 800
+ pixel-aspect-ratio: 1/1
+ framerate: 24/1
+ streamheader: < 0x5555557c7d30 [GstBuffer], 0x5555557c7e40 [GstBuffer], 0x7fffe00141d0 [GstBuffer] >
+ segment: time
+ rate: 1
+ tag: global
+ container-format: Matroska
+ }
+ SrcPad (audio_0, push) {
+ events:
+ stream-start:
+ stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/002:1551204875
+ caps: audio/mpeg
+ mpegversion: 4
+ framed: true
+ stream-format: raw
+ codec_data: 0x7fffe0014500 [GstBuffer]
+ level: 2
+ base-profile: lc
+ profile: lc
+ channels: 2
+ rate: 44100
+ segment: time
+ rate: 1
+ tag: global
+ container-format: Matroska
+ tag: stream
+ audio-codec: MPEG-4 AAC audio
+ language-code: en
+ }
+ }
+
+2018-12-29 16:20:54 +0100 Michael Olbrich <m.olbrich@pengutronix.de>
+
+ * libs/gst/helpers/gst_gdb.py:
+ gdb: make the code PEP-8 compliant
+
+2018-12-31 14:55:55 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/gst/gststream.h:
+ tests: remove unused gststream.h file
+ Looks like an earlier version of the .c file.
+
+2018-12-19 16:55:57 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Disable colors when piped
+ This follows what git and systemd tools would do.
+
+2018-12-19 16:06:40 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Fix pager color with less
+ Fixes #341
+
+2018-12-19 00:34:40 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstbasesrc.c:
+ basesrc: ensure submitted buffer list is writable
+ Fixes flaky appsrc unit test where depending on scheduling
+ the submitted list might not be writable if submitted via
+ an action signal from the application thread.
+ Fixes gst-plugins-base#522
+
+2018-12-14 15:55:27 +0000 Jonny Lamb <jonnylamb@jonnylamb.com>
+
+ * plugins/elements/gstidentity.c:
+ * plugins/elements/gstidentity.h:
+ identity: fixes to the eos-after and error-after properties
+ I copied `error-after` to make the `eos-after` property, but it turned
+ out there were some problems with that one, so this patch: adds
+ separate counters (so setting to NULL and reusing the element will
+ still work); clarifies the properties' min values; and reports an
+ error when both are set.
+
+2018-11-28 14:58:32 -0600 Michael Gruner <michael.gruner@ridgerun.com>
+
+ * scripts/gst-uninstalled:
+ gst-uninstalled: include prefix in the plugins path
+
+2018-12-17 23:29:16 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * tests/check/gst/gstdatetime.c:
+ tests: datetime: Fix failure on Windows
+ The documentation for WIN32 mktime indicates that for struct tm*
+ before January 1, 1970, that -1 is returned, and since mktime is timezone
+ dependent, the struct tm corresponding to 1:00, Jan. 1, 1970 might be failed.
+ See also
+ https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/mktime-mktime32-mktime64
+
+2018-09-25 09:03:03 +0200 Edward Hervey <edward@centricular.com>
+
+ * plugins/elements/gstqueue2.c:
+ queue2: Add details of query in debug log
+
+2018-12-15 11:42:30 +0100 Edward Hervey <edward@centricular.com>
+
+ * gst/parse/grammar.y:
+ parse: Move variable to block where it's used
+ There was a dead assignment used outside of the bin/pipeline creation
+ which was confusing (and unused). Just move that variable to
+ where it is actually used.
+ (Note that that variable was not needed outside of that block since
+ the refactoring done in 2b33d3318519fd613dd5a4ebbd7c308609904e68 )
+
+2018-12-15 11:08:09 +0100 Edward Hervey <edward@centricular.com>
+
+ * tests/examples/streamiddemux/streamiddemux-stream.c:
+ examples: Remove dead assignments
+ Those values are always set after before usage
+
+2018-12-15 11:07:21 +0100 Edward Hervey <edward@centricular.com>
+
+ * libs/gst/check/gstharness.c:
+ harness: assert on result of gst_pad_push_event()
+ That assertion was accidentally removed in the refactoring done in
+ 60de1f26c78feb0cde6d3f82cf86cf35daa71cc0
+
+2018-12-15 10:53:55 +0100 Edward Hervey <edward@centricular.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Remove dead assignment
+ readable is set just after before usage since 906bbd3817c86e64d1bfa57570469055456addfe
+
+2018-12-14 18:38:21 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/gst/gstpad.c:
+ pad: Let threads in the test take ownership of a strong reference to their pads
+ Otherwise it can easily happen that the pad is destroyed before the
+ thread disappears, as happened sometimes in the test_pad_probe_block_add_remove
+ test where joining of the thread was done *after* the pad was unreffed
+ and destroyed.
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/339
+
+2018-12-14 18:37:53 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Print some debug information about pad probe hooks we remove
+
+2018-12-11 16:48:56 +0000 Jonny Lamb <jonnylamb@jonnylamb.com>
+
+ * plugins/elements/gstidentity.c:
+ * plugins/elements/gstidentity.h:
+ identity: add eos-after property
+ Using `num-buffers` can be unpredictable as buffer sizes are often
+ arbitrary (filesrc, multifilesrc, etc.). The `error-after` property on
+ `identity` is better but obviously reports an error afterwards. This
+ adds `eos-after` which does exactly the same thing but reports EOS
+ instead.
+
+2018-12-11 10:48:46 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstcaps.c:
+ * gst/gstcaps.h:
+ * tests/check/gst/gstcaps.c:
+ gstcaps: add gst_caps_set_features_simple()
+ Convenient helper setting a caps feature on all the structures of a
+ caps.
+
+2018-12-06 20:22:21 +0000 Roman Sivriver <roman@rsiv.net>
+
+ * libs/gst/helpers/Makefile.am:
+ gst: fixed the install command for gdb python macros on macos - `install -D` is not supported by BSD install
+
+2018-12-01 10:32:07 -0500 Dardo D Kleiner <dardokleiner@gmail.com>
+
+ * tests/check/gst/gstmeta.c:
+ buffer: Add more exhaustive test for gst_buffer_foreach_meta() meta removal
+ Existing test for iterating/removing buffer meta data was insufficient
+ to detect linked list corruption when removing multiple items, and could
+ also suffer from such corruption in attempting to count remaining items.
+ Modified the one test and added several others to exercise multiple
+ scenarios.
+ Validates fix for issue #332.
+
+2018-12-01 10:48:11 -0500 Dardo D Kleiner <dardokleiner@gmail.com>
+
+ * gst/gstbuffer.c:
+ buffer: Fix memory corruption in gst_buffer_foreach_meta() when removing metas
+ Fix corruption of meta list head when removing metas at the beginning
+ during iteration. Linked list handling in gst_buffer_foreach_meta
+ failed to track the previous entry and update the correct next pointer
+ when removing items from beyond the head of the list, resulting in
+ arbitrary list pointer corruption.
+ Closes #332
+
+2018-12-05 17:24:00 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * common:
+ Automatic update of common submodule
+ From cd1dee0 to 59cb678
+
+2018-11-23 21:22:21 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * meson.build:
+ * meson_options.txt:
+ libdw support is optional
+ This was no longer optional, leading to deadcode. This regression was
+ found trying to fix the unwind variant in cerbero.
+
+2018-11-29 12:54:46 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Fix colors for "URI handling" section
+ They seemed incompatible with other colors.
+
+2018-11-28 18:06:54 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Avoid use of non-bright blue color
+ Simple blue doesn't work on Linux console, which also happens to be a
+ gnome-terminal theme. Use bright-blue instead.
+
+2018-11-26 22:00:28 +0900 KimTaeSoo <myrandy1@gmail.com>
+
+ * tests/check/libs/baseparse.c:
+ baseparse: Add unit test for short reads
+ Before the previous commit, buffer pulling count and chain function call
+ counts are not equal due to EOS. After the modification, these counts
+ are equal so unit test is passing.
+ https://gitlab.freedesktop.org/gstreamer/gstreamer/merge_requests/33
+ https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/294
+
+2018-11-15 00:17:09 +0900 KimTaeSoo <myrandy1@gmail.com>
+
+ * libs/gst/base/gstbaseparse.c:
+ baseparse: Use buffer from short reads instead of pulling again
+ baseparse internally uses a 64kb buffer for pulling data from upstream.
+ If a 64kb pull is failing with a short read, it would previously pull
+ again the requested size.
+ Doing so is not only inefficient but also seems to cause problems with
+ some elements (rawvideoparse) where the second pull would fail with EOS.
+ Short reads are only allowed in GStreamer at EOS.
+ Closes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/294
+
+2018-11-28 11:00:21 +0000 Philippe Normand <philn@igalia.com>
+
+ * plugins/elements/gstinputselector.c:
+ input-selector: Let context queries pass through
+ By doing so GL source elements can successfully reuse the GL context and display
+ of downstream elements. This change fixes an issue in playbin when using
+ gltestsrc where the context query made by the source element would fail and the
+ source element would create a second (useless) GLDisplay.
+
+2018-11-28 05:58:53 +0200 Jordan Petridis <jordan@centricular.com>
+
+ * gst/gstsystemclock.c:
+ * libs/gst/check/libcheck/check.c:
+ * plugins/elements/gstfdsink.c:
+ * tests/benchmarks/capsnego.c:
+ * tests/check/gst/gstpad.c:
+ * tests/check/gst/gsturi.c:
+ Run gst-indent through the files
+ This is required before we enabled an indent test in the CI.
+ https://gitlab.freedesktop.org/gstreamer/gstreamer-project/issues/33
+
+2018-11-24 14:51:19 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Use only original 16 colors
+ Not only this will make colored output work on old terminals and console
+ as well, terminals can theme the actual colors this way to make it fit
+ with their different themes this way.
+
+2018-11-27 02:59:41 +0100 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/check/gstharness.c:
+ Revert "harness: Take ownership of floating references (pads, elements) passed to the harness"
+ This reverts commit 2faf93c009d866d68cf0d063a29bb8c21f192aea.
+ THis broke half our unit tests, oops:
+ https://ci.gstreamer.net/job/GStreamer-master/11203/testReport/
+
+2018-11-13 14:32:56 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/check/gstharness.c:
+ harness: Take ownership of floating references (pads, elements) passed to the harness
+ Without this bindings get confused about the meaning of references, and
+ we really own these references if they are not already owned by
+ something else.
+
+2018-11-24 12:06:38 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Tell `less` to parse color codes
+ This change was originally part of 2cf16838c54 (gst-inspect: Colored
+ output) but got lost during the recent rebase.
+
+2018-10-27 18:06:20 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect-1.0.1:
+ * tools/gst-inspect.c:
+ gst-inspect: Colored output
+ Let's make the output a bit pretty to read. The colored output can be
+ disabled with `--no-colors` option or by setting `GST_INSPECT_NO_COLORS'
+ env (to any value).
+ The chosen colors are based on the popular Solarized theme, which is
+ targeted for both dark and light backgrounds.
+ Note:
+ * We only support true colors. If the terminal doesn't signal support for
+ that via 'COLORTERM' env, we disable colored output.
+ * We don't add colors to --print-plugin-auto-install-info output, as
+ that's meant for machines, not humans. Not only machines don't care
+ about beauty, the existing ones will likely not expect colors and choke
+ on it and we'll get angry mob at our doors.
+ [1] https://ethanschoonover.com/solarized
+
+2018-11-10 23:35:18 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Remove redundant plugin name from output
+ When printing info about a specific plugin, there is no need to prefix
+ some of the details with plugin's name. It's not only redundant but also
+ inconsistent and makes the task of adding consistent coloring to the
+ output (which we'll do in a follow patch), harder.
+
+2018-11-23 03:31:38 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Use less -F -X everywhere as the pager
+ This emulates the default behaviour of git help pages, and also fixes
+ a bug on macOS where `less -F` doesn't display anything at all when
+ the output is shorter than one terminal screen.
+ Also moved the DEFAULT_PAGER define to after the includes, because
+ it's an unprefixed define.
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/330
+
+2018-11-12 14:00:22 +0200 Jordan Petridis <jordan@centricular.com>
+
+ * .gitlab-ci.yml:
+ Add Gitlab CI configuration
+ This commit adds a .gitlab-ci.yml file, which uses a feature
+ to fetch the config from a centralized repository. The intent is
+ to have all the gstreamer modules use the same configuration.
+ The configuration is currently hosted at the gst-ci repository
+ under the gitlab/ci_template.yml path.
+ Part of https://gitlab.freedesktop.org/gstreamer/gstreamer-project/issues/29
+
+2018-12-11 20:12:50 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * tests/check/gst/gstcaps.c:
+ tests: caps: Add more broken caps test case
+
+2018-12-11 20:12:41 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * gst/gstcaps.c:
+ * gst/gstchildproxy.c:
+ * gst/gststructure.c:
+ * gst/gsttracerrecord.c:
+ gst: Fix string leak when G_VALUE_COLLECT_INIT() was failed
+ Returned string should be freed
+ Fixes #319
+
+2018-11-10 20:41:40 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstdebugutils.h:
+ debugutils: Make sure that GST_DEBUG_GRAPH_SHOW_VERBOSE gets the correct value in introspection
+ Currently in Python it would become a signed 64 bit value but should
+ actually be an unsigned 32 bit value with all bits set.
+ This is the same problem as with GST_MESSAGE_TYPE_ANY.
+ See https://bugzilla.gnome.org/show_bug.cgi?id=732633
+
+2018-11-06 10:20:17 +0100 Havard Graff <havard.graff@gmail.com>
+
+ * configure.ac:
+ * gst/gstconfig.h.in:
+ * gst/meson.build:
+ * libs/gst/check/gstcheck.h:
+ * tests/check/gst/gstcaps.c:
+ * tests/check/gst/gstghostpad.c:
+ * tests/check/gst/gstobject.c:
+ * tests/check/gst/gststructure.c:
+ * tests/check/gst/gsturi.c:
+ * tests/check/gst/gstvalue.c:
+ * tests/check/libs/adapter.c:
+ tests: fix tests when compiling with glib_checks=disabled
+ We won't be able to do ASSERT_CRITICAL, but the main body of the tests
+ are still valid, and given we ship GStreamer with this configuration, it
+ is important to be able to run some tests against it.
+
+2018-10-31 10:29:22 +0100 Havard Graff <havard.graff@gmail.com>
+
+ * tests/check/gst/gstdatetime.c:
+ test/datetime: fix test for windows
+ In the previous configuration, mktime returned -1 on Windows 10 compiled
+ with MSVC using meson.
+ Fix this by moving the hour one forward.
+
+2018-10-31 10:27:23 +0100 Havard Graff <havard.graff@gmail.com>
+
+ * tests/check/gst/gsturi.c:
+ tests/uri: fix test after GHashTable changes in GLib 2.59
+ Maybe the implementation should not be dependent on a "random" hash-table
+ ordering, but at least this shows the problem clearly.
+
+2018-11-09 11:34:19 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Pipe stderr to pager as well
+ If stderr is not redirected by the user, also page that.
+
+2018-11-05 12:24:01 +0100 Niels De Graef <Niels.DeGraef@barco.com>
+
+ * plugins/elements/gsttypefindelement.c:
+ typefind: cleanup (un)reffing of several objects.
+ By using these functions, we can shave off a few lines, and make the
+ intent of that line more clear.
+
+2018-11-08 14:09:32 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/helpers/Makefile.am:
+ Fix distcheck
+ Follow-up to !18 and #320.
+
+2018-09-26 13:33:31 +0200 Michael Olbrich <m.olbrich@pengutronix.de>
+
+ * configure.ac:
+ * libs/gst/helpers/.gitignore:
+ * libs/gst/helpers/Makefile.am:
+ * libs/gst/helpers/glib_gobject_helper.py:
+ * libs/gst/helpers/gst_gdb.py:
+ * libs/gst/helpers/libgstreamer-gdb.py.in:
+ * libs/gst/helpers/meson.build:
+ gst: add some gdb python macros
+ This adds gdb pretty printer for some GStreamer types.
+ For GstObject pointers the type and name is added, e.g.
+ "0x5555557e4110 [GstDecodeBin|decodebin0]".
+ For GstMiniObject pointers the object type is added, e.g.
+ "0x7fffe001fc50 [GstBuffer]".
+ For GstClockTime and GstClockTimeDiff the time is also printed in human
+ readable form, e.g. "150116219955 [+0:02:30.116219955]".
+ Fixes #320
+
+2018-11-08 10:09:29 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstclock.c:
+ * gst/gstclock.h:
+ clock: Move clock GWeakRef to a private GstClockEntry struct
+ There's no need for it to be in the public struct and we can keep the
+ padding for things to be added in the future.
+
+2018-05-17 21:42:43 +1000 Matthew Waters <matthew@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstpad.c:
+ * gst/gstquark.c:
+ * gst/gstquark.h:
+ * gst/gstquery.c:
+ * gst/gstquery.h:
+ * plugins/elements/gstqueue2.c:
+ * plugins/elements/gstqueue2.h:
+ * tests/check/elements/queue2.c:
+ query: add a new bitrate query
+ Allows determining from downstream what the expected bitrate of a stream
+ may be which is useful in queue2 for setting time based limits when
+ upstream does not provide timing information.
+ Implement bitrate query handling in queue2
+ https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/issues/60
+
+2018-05-17 21:09:36 +1000 Matthew Waters <matthew@centricular.com>
+
+ * plugins/elements/gstqueue2.c:
+ * plugins/elements/gstqueue2.h:
+ queue2: avoid ping-pong between 0% and 100% buffering messages
+ If upstream is pushing buffers larger than our limits, only 1 buffer
+ is ever in the queue at a time. Once that single buffer has left the
+ queue, a 0% buffering message would be posted followed immediately by a
+ 100% buffering message when the next buffer was inserted into the queue
+ a very short time later. As per the recommendations, This would result
+ in the application pausing for a short while causing the appearance of
+ a short stutter.
+ The first step of a solution involves not posting a buffering message if
+ there is still data waiting on the sink pad for insertion into the queue.
+ This successfully drops the 0% messages from being posted however a
+ message is still posted on each transition to 100% when the new buffer
+ arrives resulting in a string of 100% buffering messages. We silence
+ these by storing the last posted buffering percentage and only posting a
+ new message when it is different from or last posted message.
+
+2018-11-06 20:12:27 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * plugins/tracers/gstlog.c:
+ tracers: log: Fix post query trace
+ The post tracer hooks have a GstQuery argument which was truncated from
+ the trace. As the post hook is the one that contains the useful data,
+ this bug was hiding the important information from that trace.
+
+2018-11-06 14:21:35 +0100 Havard Graff <havard.graff@gmail.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ docs: add new GstTestClock API
+
+2018-11-06 11:45:45 +0100 Havard Graff <havard.graff@gmail.com>
+
+ * libs/gst/check/gstharness.c:
+ * libs/gst/check/gsttestclock.c:
+ * libs/gst/check/gsttestclock.h:
+ harness: improve _wait_for_clock_id_waits performance
+ By moving the functionality down to the testclock, the implementation
+ no longer needs to poll the waits, but rather wait properly for
+ them to be added.
+ The performance-hit here would be that by polling the test-clock
+ regularly, you would create contention on the testclock-lock, making code
+ using the testclock (gst_clock_id_wait) fighting for the lock.
+
+2018-09-20 01:42:48 -0700 Havard Graff <havard@pexip.com>
+
+ * gst/gstsystemclock.c:
+ systemclock: pre-calculate the ratio for multiplying the perf-count on win
+ Saves a lot of computations.
+
+2018-10-28 12:46:09 +0100 Havard Graff <havard.graff@gmail.com>
+
+ * gst/gstpad.c:
+ * tests/check/gst/gstpad.c:
+ gstpad: use hook_id instead of hook in called_probes list
+ A pointer to a hook in this list can easily not be unique, given both
+ the slice-allocator reusing memory, and the OS re-using freed blocks
+ in malloc.
+ By doing many repeated add and remove of probes, this becomes very easily
+ reproduced.
+ Instead use hook_id, which *is* unique for a added GHook.
+
+2018-09-27 19:13:35 +1000 Matthew Waters <matthew@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstbuffer.c:
+ * gst/gstbuffer.h:
+ * tests/check/gst/gstbuffer.c:
+ gst/buffer: add a new function for wrapping GBytes
+ One restriction on the GBytes is that the data cannot be NULL as this is
+ explicitly forbidden by GstMemory.
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/318
+
+2018-11-03 00:49:01 +1100 Matthew Waters <matthew@centricular.com>
+
+ * meson.build:
+ * plugins/elements/meson.build:
+ * plugins/tracers/meson.build:
+ meson: generate pkg-config files for our plugins
+
+2018-11-05 14:07:59 +0100 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/gstminiobject.c:
+ * gst/gstminiobject.h:
+ * gst/gstobject.c:
+ * gst/gstobject.h:
+ * gst/gststructure.c:
+ * gst/gststructure.h:
+ gst_clear_*: Remove volatile from arguments
+ g_clear_pointer is not thread-safe and never was. GLib similarly removed
+ the volatile from g_clear_object in 2aacef39b1.
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/327
+
+2018-11-05 14:03:51 +0100 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/gstbuffer.h:
+ * gst/gstbufferlist.h:
+ * gst/gstcaps.h:
+ * gst/gstevent.h:
+ * gst/gstmessage.h:
+ * gst/gstquery.h:
+ * gst/gsttaglist.h:
+ gst_clear_*: Cast to GstMiniObject** when needed
+
+2018-11-05 09:37:29 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ docs: update gstreamer-sections.txt with new API
+
+2018-11-05 10:33:54 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstquery.h:
+ query: add gst_query_take()
+ This makes its API consistent with the other GstMiniObject subclasses
+
+2018-11-05 08:57:16 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstmessage.h:
+ message: add gst_message_take()
+ This makes its API consistent with the other GstMiniObject subclasses
+
+2018-11-04 19:14:32 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gsttaglist.h:
+ taglist: add gst_tag_list_replace/take()
+ This makes its API consistent with the other GstMiniObject subclasses.
+
+2018-11-04 19:13:39 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstbufferlist.h:
+ bufferlist: add gst_buffer_list_replace/take()
+ This makes its API consistent with the other GstMiniObject subclasses.
+
+2018-11-04 19:04:19 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gststructure.c:
+ * gst/gststructure.h:
+ structure: add gst_clear_structure()
+ Basically, you can use this instead of using gst_structure_free (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:55:42 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gsttaglist.h:
+ taglist: add gst_clear_tag_list()
+ Basically, you can use this instead of using gst_tag_list_unref (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:55:16 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstquery.h:
+ query: add gst_clear_query()
+ Basically, you can use this instead of using gst_query_unref (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:54:44 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstmessage.h:
+ message: add gst_clear_message()
+ Basically, you can use this instead of using gst_message_unref (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:53:51 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstevent.h:
+ event: add gst_clear_event()
+ Basically, you can use this instead of using gst_event_unref (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:53:31 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstcaps.h:
+ caps: add gst_clear_caps()
+ Basically, you can use this instead of using gst_caps_unref (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:52:50 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstbufferlist.h:
+ bufferlist: add gst_clear_buffer_list()
+ Basically, you can use this instead of using gst_buffer_list_unref
+ (which needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-04 18:51:28 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstbuffer.h:
+ buffer: add gst_clear_buffer()
+ Basically, you can use this instead of using gst_buffer_unref (which
+ needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-11-03 20:00:57 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstminiobject.c:
+ * gst/gstminiobject.h:
+ miniobject: add gst_clear_mini_object()
+ This is based on g_clear_object(). Basically, you can use this instead
+ of using gst_mini_object_unref (which needs to be preceded by a NULL-check).
+ Also fixes #275
+
+2018-02-08 17:31:15 +0100 Niels De Graef <nielsdegraef@gmail.com>
+
+ * gst/gstobject.c:
+ * gst/gstobject.h:
+ object: add gst_clear_object()
+ This is based on g_clear_object(). Basically, you can use this instead
+ of using g_object_unref (which needs to be preceded by a NULL-check).
+ Fixes #275
+
+2018-11-05 11:07:14 +0800 Haihao Xiang <haihao.xiang@intel.com>
+
+ * .gitmodules:
+ * gstreamer.doap:
+ * scripts/create-uninstalled-setup.sh:
+ Clone the code from gitlab
+ This fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/326
+
+2018-11-04 12:45:57 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gsttypefindelement.c:
+ typefind: Always forward RECONFIGURE events upstream
+ Based on a patch by Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/67
+
+2018-11-03 18:44:48 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstclock.c:
+ * gst/gstclock.h:
+ clock: Move clock weak ref into its own ABI struct
+ Otherwise it will be hard to add other things into the padding later
+ without breaking API.
+
+2018-11-03 18:29:17 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstclock.c:
+ clock: Add new functions to the documentation
+
+2018-11-03 18:29:03 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstclock.c:
+ * gst/gstclock.h:
+ clock: Fix deprecation handling of the GstClock clock field
+
+2016-09-08 08:49:54 -0600 Thomas Bluemel <tbluemel@control4.com>
+
+ * gst/gstclock.c:
+ * gst/gstclock.h:
+ * libs/gst/base/gstbasesink.c:
+ clock: Keep weak reference to underlying clock
+ Fixes potential segmentation fault when using a GstClockID that
+ is referencing an already freed GstClock
+ Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/187
+
+2018-10-30 15:30:38 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Don't page if output fits the screen
+
+2018-10-30 14:52:15 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Flush stdout before closing stdout FD
+ Otherwise, last line can be lost.
+
+2018-10-28 15:19:38 +0000 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/check/Makefile.am:
+ * libs/gst/check/gstharness.c:
+ * libs/gst/check/gstharness.h:
+ harness: Add API for proposing meta APIs from the allocation query
+ https://bugzilla.gnome.org/show_bug.cgi?id=797350
+
+2018-09-20 23:17:52 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/gstsegment.c:
+ * tests/check/gst/gstsegment.c:
+ segment: Allow stop == -1 in gst_segment_to_running_time() and rate < 0
+ If a segment has stop == -1, then gst_segment_to_running_time()
+ would refuse to calculate a running time for negative rates,
+ but gst_segment_do_seek() allows this scenario and uses a
+ valid duration for calculations.
+ Make the 2 functions consistent by using any configured duration
+ to calculate a running time too in that case.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796559
+
+2018-10-27 13:38:57 +0100 Zeeshan Ali <zeenix@collabora.co.uk>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Pipe stdout to less if not piped already
+ https://bugzilla.gnome.org/show_bug.cgi?id=797344
+
+2018-10-26 09:21:42 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gsttypefindelement.c:
+ typefind: Lower debug level of some output related to the URI query
+ It's not a warning if an URI doesn't have an extension, and it's also
+ not mandatory that sources have an URI or even answer the URI query.
+
+2018-10-16 19:35:03 +0300 Jordan Petridis <jordan@centricular.com>
+
+ * gst/gstclock.h:
+ * gst/gstinfo.h:
+ * gst/gstvalue.h:
+ gst: skip format specifiers from gir generation
+ GST_TIME_FORMAT, GST_TIME_ARGS, GST_STIME_FORMAT, GST_STIME_ARGS
+ GST_PTR_FORMAT, GST_SEGMENT_FORMAT, GST_FOURCC_FORMAT and
+ GST_FOURCC_ARGS are format specifiers.
+ They can't be used outside of C and should be generated in the gir.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797320
+
+2018-10-16 19:35:03 +0300 Jordan Petridis <jordan@centricular.com>
+
+ * gst/gsterror.h:
+ gst/gsterror.h: skip GST_ERROR_SYSTEM during gir generation
+ GST_ERROR_SYSTEM can't really be used outside of C and should
+ be skipped.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797320
+
+2018-10-22 15:26:25 +0200 Edward Hervey <edward@centricular.com>
+
+ * plugins/elements/gstmultiqueue.c:
+ multiqueue: Don't clamp running times for position calculation
+ Since we use full signed running times, we no longer need to clamp
+ the buffer time.
+ This avoids having the position of single queues not advancing for
+ buffers that are out of segment and never waking up non-linked
+ streams (resulting in an apparent "deadlock").
+
+2018-10-22 13:45:52 +0200 Edward Hervey <edward@centricular.com>
+
+ * plugins/elements/gstqueue2.c:
+ queue2: Reset result flow when retrying
+ If we ever get a GST_FLOW_EOS from downstream, we might retry
+ pushing new data. But if pushing that data doesn't return a
+ GstFlowReturn (such as pushing events), we would end up returning
+ the previous GstFlowReturn (i.e. EOS).
+ Not properly resetting it would cause cases where queue2 would
+ stop pushing on the first GstEvent stored (even if there is more
+ data contained within).
+
+2018-10-17 16:38:42 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * tests/check/gst/gstpipeline.c:
+ tests: Use GstTestClock for processing-deadline test
+ Use the test clock instead of using a real one to make it
+ easier to run in valgrind.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797291
+
+2018-10-16 10:48:40 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/gst/gstpipeline.c:
+ tests: pipeline: fix leak
+
+2018-10-15 18:47:16 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gstqueuearray.c:
+ queuearray: Only clear dropped item if it is not returned
+
+2018-10-15 15:24:07 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gstqueuearray.c:
+ queuearray: Clear items when dropping them and a clear function was defined
+
+2018-10-12 15:34:45 +0100 Philippe Normand <philn@igalia.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstelementfactory.h:
+ gstelementfactory: Remove MEDIA_HARDWARE FactoryType
+ Using the MEDIA_ classifier prefix was inappropriate. It is sufficient to
+ specify the additional klass name that element can set in their metadata.
+ (follow-up of commit ca4b61c55562a4b74f241fe54cf1e5639a2aea25)
+ https://bugzilla.gnome.org/show_bug.cgi?id=796921
+
+2018-10-05 12:19:46 +0200 Philippe Normand <philn@igalia.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstelementfactory.h:
+ gstelementfactory: Add MEDIA_HARDWARE klass classifier
+ The Harware factory type classifier allows elements (decoders and encoders,
+ mostly) to advertize they rely on hardware devices to perform encoding or
+ decoding operations. This classifier can be used by applications to filter and
+ select only the elements that use hardware devices, for instance to ensure
+ zero-copy support is enabled for a specific pipeline.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796921
+
+2018-10-10 00:00:14 -0700 Aleix Conchillo Flaqué <aleix@oblong.com>
+
+ * scripts/gst-uninstalled:
+ gst-uninstalled: add libnice to LD_LIBRARY_PATH
+ https://bugzilla.gnome.org/show_bug.cgi?id=797269
+
+2018-10-11 14:34:40 +1100 Jan Schmidt <jan@centricular.com>
+
+ * libs/gst/net/gstptpclock.c:
+ ptp clock: Wait for ANNOUNCE before selecting a master
+ Previously, with opportunistic sync we'd track a master
+ clock as soon as we see a SYNC message, and hence sync up
+ faster, but then we'd announce we're synched before seeing
+ the ANNOUNCE, leaving the clock details like grandmaster-clock
+ empty.
+ A better way is to start tracking the clock opportunistically,
+ but not announce we're synched until we've also seen the ANNOUNCE.
+
+2018-10-11 14:33:35 +1100 Jan Schmidt <jan@centricular.com>
+
+ * libs/gst/net/gstptpclock.c:
+ ptp clock: improve debug
+ Log message arrival times. Fix a typo in one debug string
+
+2018-10-11 14:29:47 +1100 Jan Schmidt <jan@centricular.com>
+
+ * libs/gst/net/gstptpclock.c:
+ ptp clock: Increase tolerance for late follow-up and delay-resp
+ The follow-up and delay-resp messages carry precise
+ timestamps for the arrival at the clock master, but
+ the local return time is unimportant, so we should be very
+ lenient in accepting them late. Some PTP masters don't
+ prioritise sending those packets, and we reject all the
+ responses and never sync - or take forever to do so.
+ Increase the tolerance to 20x the mean path delay.
+ Also fix a typo in one debug output that would print
+ the absolute time of the delay-resp message, not the offset
+ from the delay-req that it's actually being compared against.
+
+2018-09-18 09:36:45 +1000 Jan Schmidt <jan@centricular.com>
+
+ * libs/gst/net/gstptpclock.c:
+ ptpclock: Add TRACE level debug output
+ Add some debugging to be able to tell what is happening
+ inside the PTP clock protocol handling.
+
+2018-10-07 19:51:41 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: use new 'python' module instead of deprecated 'python3' one
+ https://github.com/mesonbuild/meson/pull/4169
+
+2018-10-04 00:30:52 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: document new "min-upstream-latency" property is in nanosecs
+ https://bugzilla.gnome.org/show_bug.cgi?id=797213
+
+2018-10-03 18:23:01 +0200 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstprotection.h:
+ protection: Fix the string to define unspecified system id
+ Setting it to "unspecified-system-id".
+
+2018-10-01 12:11:47 +0200 Yacine Bandou <yacine.bandou@softathome.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstprotection.h:
+ protection: Add a new definition for unspecified system protection
+ In some cases the system protection ID is not present in the contents
+ or in their metadata.
+ This define is used to set the value of the "system_id" field in GstProtectionEvent,
+ with this value, the application will use an external information to choose which
+ protection system to use.
+ Example: The matroskademux uses this value in the case of encrypted WebM,
+ the application will choose the appropriate protection system based on the information
+ received through EME API.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797231
+
+2018-09-27 17:30:25 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/base/gstqueuearray.c:
+ * libs/gst/base/gstqueuearray.h:
+ queuearray: Add set_clear_func and clear functions
+ gst_queue_array_clear will clear the GstQueueArray,
+ gst_queue_array_set_clear_func will set a clear function for each
+ element to be called on _clear and on _free.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797218
+
+2018-09-27 13:20:10 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: add gtk-doc blurb for new min-upstream-latency prop
+
+2018-09-27 12:42:30 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: add min-upstream-latency property.
+ This is exposed as a solution to the use case of plugging in
+ sources with a higher latency after the aggregator has started
+ playing with an initial set of sources, allowing to avoid resyncing.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797213
+
+2018-09-20 16:28:35 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * gst/gstelement.c:
+ element: remove inactive pad g_warning in add_pad
+ The documentation incorrectly used to state that the pads were
+ not automatically activated when added, whereas we actually do
+ that when appropriate.
+ Callers of gst_element_add_pad must not hold the object lock,
+ which implies that they cannot perform the same checks as
+ add_pad in a non-racy manner.
+ This updates the documentation, and removes the g_warning
+ that was output before performing automatic activation.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797181
+
+2018-09-19 19:37:38 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/check/meson.build:
+ meson: use library() for libgstcheck instead of always building a shared lib
+ Otherwise we try to build a shared lib when we build the rest
+ of GStreamer statically, which won't work because we pass
+ -DGST_STATIC_COMPILATION when building statically, which means
+ we won't dllimport public symbols from our libs which means
+ that on Windows the unit tests will fail to link to libgstcheck.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797185
+
+2018-08-26 01:23:23 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/misc/Makefile.am:
+ * tests/misc/meson.build:
+ * tests/misc/netclock-replay.c:
+ tests: netclock-replay: fix build with new api export/import
+ Can't mix/match imports and exports from the same library
+ here, so just include all .c files needed instead and don't
+ link to gstnet at all then.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797185
+
+2018-08-25 23:56:01 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * common:
+ * configure.ac:
+ * gst/gstconfig.h.in:
+ * libs/gst/base/base-prelude.h:
+ * libs/gst/base/gstdataqueue.c:
+ * libs/gst/base/gstflowcombiner.c:
+ * libs/gst/base/gstqueuearray.c:
+ * libs/gst/check/check-prelude.h:
+ * libs/gst/check/gstbufferstraw.c:
+ * libs/gst/check/gstconsistencychecker.c:
+ * libs/gst/controller/controller-prelude.h:
+ * libs/gst/controller/gstargbcontrolbinding.c:
+ * libs/gst/controller/gstdirectcontrolbinding.c:
+ * libs/gst/controller/gstinterpolationcontrolsource.c:
+ * libs/gst/controller/gstlfocontrolsource.c:
+ * libs/gst/controller/gsttimedvaluecontrolsource.c:
+ * libs/gst/controller/gsttriggercontrolsource.c:
+ * libs/gst/controller/meson.build:
+ * libs/gst/net/gstnetaddressmeta.c:
+ * libs/gst/net/gstnetcontrolmessagemeta.c:
+ * libs/gst/net/net-prelude.h:
+ * meson.build:
+ libs: figure out right export define in configure
+ Add new GST_API_EXPORT in config.h and use that for GST_*_API
+ decorators instead of GST_EXPORT.
+ The right export define depends on the toolchain and whether
+ we're using -fvisibility=hidden or not, so it's better to set it
+ to the right thing directly than hard-coding a compiler whitelist
+ in the public header.
+ We put the export define into config.h instead of passing it via the
+ command line to the compiler because it might contain spaces and brackets
+ and in the autotools scenario we'd have to pass that through multiple
+ layers of plumbing and Makefile/shell escaping and we're just not going
+ to be *that* lucky.
+ The export define is only used if we're compiling our lib, not by external
+ users of the lib headers, so it's not a problem to put it into config.h
+ Also, this means all .c files of libs need to include config.h
+ to get the export marker defined, so fix up a few that didn't
+ include config.h.
+ This commit depends on a common submodule commit that makes gst-glib-gen.mak
+ add an #include "config.h" to generated enum/marshal .c files for the
+ autotools build.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797185
+
+2018-08-25 23:09:12 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/Makefile.am:
+ * gst/gstconfig.h.in:
+ * gst/meson.build:
+ * gst/parse/Makefile.am:
+ * libs/gst/base/Makefile.am:
+ * libs/gst/base/base-prelude.h:
+ * libs/gst/base/meson.build:
+ * libs/gst/check/Makefile.am:
+ * libs/gst/check/check-prelude.h:
+ * libs/gst/check/meson.build:
+ * libs/gst/controller/Makefile.am:
+ * libs/gst/controller/controller-prelude.h:
+ * libs/gst/controller/meson.build:
+ * libs/gst/net/Makefile.am:
+ * libs/gst/net/meson.build:
+ * libs/gst/net/net-prelude.h:
+ libs: fix 'inconsistent DLL linkage' warnings on Windows
+ For each lib we build export its own API in headers when we're
+ building it, otherwise import the API from the headers.
+ This fixes linker warnings on Windows when building with MSVC.
+ The problem was that we had defined all GST_*_API decorators
+ unconditionally to GST_EXPORT. This was intentional and only
+ supposed to be temporary, but caused linker warnings because
+ we tell the linker that we want to export all symbols even
+ those from externall DLLs, and when the linker notices that
+ they were in external DLLS and not present locally it warns.
+ What we need to do when building each library is: export
+ the library's own symbols and import all other symbols. To
+ this end we define e.g. BUILDING_GST_FOO and then we define
+ the GST_FOO_API decorator either to export or to import
+ symbols depending on whether BUILDING_GST_FOO is set or not.
+ That way external users of each library API automatically
+ get the import.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797185
+
+2018-08-25 22:53:07 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstconfig.h.in:
+ gstconfig.h: add GST_API_IMPORT define
+ This is for use by the various GST_*_API decorators and
+ will be what they get defined to when a library API is being
+ used by external users of that library (not the library itself
+ whilst it's being compiled).
+ In most cases it will simply map to a plain 'extern' but on
+ Windows with MSVC it will need to map to __declspec(dllimport).
+ For functions this is not strictly needed, but for exported
+ variables it is.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797185
+
+2018-09-21 22:26:00 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * meson.build:
+ meson: Specify encoding to UTF-8 when building with MSVC
+ Fix build on some non-US locale Windows systems
+ Error:
+ gstreamer/gst/gstdebugutils.c(194): error C2001
+ https://bugzilla.gnome.org/show_bug.cgi?id=797186
+
+2018-09-20 16:22:14 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstaggregator.h:
+ aggregator: define autoptr cleanup functions
+
+2018-09-19 15:42:06 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ docs: gst: default to single include also for protection meta API
+ https://bugzilla.gnome.org/show_bug.cgi?id=797165
+
+2018-09-19 15:07:36 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ docs: libs: move all includes to canonical single header includes
+ And fix up bogus libs/ prefix for controller lib includes.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797165
+
+2018-09-18 15:44:24 +0200 Linus Svensson <linussn@axis.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ docs: Update include directive for gstreamer-base components
+ Change to always include gst/libs/base.h in order to also
+ include base-prelude.h, but also because it's the right
+ thing for people to include anyway.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797165
+
+2018-09-19 11:31:43 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: add glib-checks option to disable API guards and such
+ We want this enabled by default, also in releases, but people
+ may want to disable this for performance-critical workloads or
+ on embedded devices.
+
+2018-09-19 11:25:24 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson_options.txt:
+ meson: fix missing closing bracket in option descriptions
+
+2018-09-17 22:13:22 +1000 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/gst/gstsegment.c:
+ tests: Use a different rate in a segment test.
+ Using a rate of 1.1 in the test is causing the test to
+ fail on 32-bit because ceil(1.1 * 10) can round to 12.
+ Instead use a rate 2.0 that can be expressed as floating
+ point number and doesn't trigger the problem.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797154
+
+2018-09-11 21:32:27 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * plugins/elements/gstfilesink.c:
+ filesink: Fix wrong printf format
+ We add a guint64 and a guint, the result is a guint64. On 64bit
+ architecture, this is the same, but on 32bit architecture, it's not.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797127
+
+2018-09-08 13:05:13 +0100 Philippe Normand <philn@igalia.com>
+
+ * gst/gstbin.c:
+ bin: Fix use-after-free issue in gst_bin_add()
+ gst_element_post_message() takes ownership of the message so we need to increase
+ its refcount until we no longer require access to its data (context_type).
+ https://bugzilla.gnome.org/show_bug.cgi?id=797099
+
+2018-09-05 16:32:07 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * libs/gst/meson.build:
+ * tests/meson.build:
+ meson: Always use a dependency object for dependencies
+ Fixes a configure error with gst-build:
+ subprojects/gst-plugins-base/meson.build:235:2: ERROR: Fetched variable 'gst_check_dep' in the subproject 'gstreamer' is not a dependency object.
+
+2018-09-03 12:06:35 +0100 Philippe Normand <philn@igalia.com>
+
+ * gst/gstutils.c:
+ utils: Set default values for position and duration query results
+ https://bugzilla.gnome.org/show_bug.cgi?id=797066
+
+2018-08-30 17:44:07 +0100 Philippe Normand <philn@igalia.com>
+
+ * libs/gst/base/gstbaseparse.c:
+ baseparse: avg_bitrate calculation critical warning fix
+ The avg_bitrate is an unsigned int, so the gst_util_uin64_scale() function can't
+ be used for it, as it expects signed integers for the fraction parts arguments.
+ https://bugzilla.gnome.org/show_bug.cgi?id=797054
+
+2018-08-31 12:15:16 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstinputselector.c:
+ input-selector: Bring latency handling in sync with GstPad code
+
+2018-08-31 12:12:13 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ Revert "pad: Don't drop LATENCY queries with default implementation"
+ This reverts commit 794944f779f954375fc74a3fffcc2067bba6a3e5.
+ Accumulating non-live latency values generally makes no sense and often
+ gives invalid results with min>max
+
+2018-08-31 12:12:09 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ Revert "pad: Accumulate live/non-live latency values separately"
+ This reverts commit f5783e1cacb09867d81ba089b229faa7dd0edd0c.
+
+2018-08-29 02:03:28 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * gst/meson.build:
+ * libs/gst/base/meson.build:
+ * libs/gst/check/meson.build:
+ * libs/gst/controller/meson.build:
+ * libs/gst/net/meson.build:
+ * meson.build:
+ meson: Maintain macOS ABI through dylib versioning
+ Requires Meson 0.48, but the feature will be ignored on older versions
+ so it's safe to add it without bumping the requirement.
+ Documentation:
+ https://github.com/mesonbuild/meson/blob/master/docs/markdown/Reference-manual.md#shared_library
+
+2018-08-31 11:47:03 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstinputselector.c:
+ input-selector: Apply GstPad default latency handler fixes here too
+
+2018-08-31 11:41:47 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Accumulate live/non-live latency values separately
+ And only ever use the non-live values if all pads are non-live,
+ otherwise only use the results of all live pads.
+ It's unclear what one would use the values for in the non-live case, but
+ by this we at least pass them through correctly then.
+ This is a follow-up for 794944f779f954375fc74a3fffcc2067bba6a3e5, which
+ causes wrong latency calculations if the first pad is non-live but a
+ later pad is actually live. In that case the live values would be
+ accumulated together with the values of the non-live first pad,
+ generally causing wrong min/max latencies to be calculated.
+
+2018-08-29 19:26:04 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstconcat.c:
+ concat: Improve debug output a bit by printing pad names
+
+2018-08-28 14:22:16 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstfilesink.c:
+ filesink: Flush buffers before directly writing out buffers with the SYNC_AFTER flag
+ Otherwise we write out the SYNC_AFTER buffer immediately, and the
+ previously queued up buffers afterwards which then breaks the order of
+ data.
+ Also add various debug output.
+
+2018-08-27 22:32:01 +1000 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/gst/gstsegment.c:
+ gstsegment: Add check for gst_segment_offset_running_time()
+ Add a check for gst_segment_offset_running_time() that values
+ are taken directly from the segment base if possible.
+
+2018-08-23 22:34:47 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/gstsegment.c:
+ * tests/check/gst/gstsegment.c:
+ gstsegment: Handle positions before the segment properly
+ Fixes for gst_segment_position_from_running_time_full() when
+ converting running_times that precede the segment start (or
+ stop in a negative rate segment)
+ The return value was incorrectly negated in those cases.
+ Add some more unit test checks for those cases, and especially
+ for segments with offsets.
+
+2018-08-26 00:45:45 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/gst/gstmeta.c:
+ tests: meta: fix msvc compiler warnings
+ gstmeta.c(167): warning C4090: 'function': different 'const' qualifiers
+ gstmeta.c(172): warning C4090: 'function': different 'const' qualifiers
+ gstmeta.c(211): warning C4090: 'function': different 'const' qualifiers
+ gstmeta.c(216): warning C4090: 'function': different 'const' qualifiers
+
+2018-08-26 00:34:44 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/check/check-prelude.h:
+ * libs/gst/check/gsttestclock.h:
+ check: testclock: fix deprecation guards
+ Make our own deprecation marker for libgstcheck,
+ since the function declaration must contain the
+ right API export decorator (GST_CHECK_API) and
+ not the one for GStreamer core.
+
+2018-08-26 00:16:51 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstbitwriter.h:
+ bitwriter: fix compiler warning
+ Don't return a value from a function that doesn't
+ return a value using the returned value from a
+ function that also doesn't return a value.
+ gstbitwriter.h(265): warning C4098: 'gst_bit_writer_align_bytes_unchecked': 'void' function returning a value
+
+2018-08-17 17:24:59 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/elements/filesink.c:
+ filesink: Use SYNC_AFTER flag in seeking test
+ Otherwise it's not guaranteed that buffers are actually on disk after
+ pushing them, and reading the file via g_file_get_contents() might not
+ include them yet.
+
+2018-08-17 17:24:19 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstfilesink.c:
+ filesink: Consider the current buffer size when checking the current position
+
+2018-08-17 17:23:52 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstfilesink.c:
+ filesink: Reset the current buffer size to NULL and clear the buffer on close and FLUSH_STOP
+
+2018-08-17 02:54:00 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * libs/gst/helpers/meson.build:
+ * meson.build:
+ meson: host_system is 'ios' when building for iOS
+ The cross file sets this value, and we use 'ios' in Cerbero.
+
+2018-08-14 11:28:00 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstfilesink.c:
+ * plugins/elements/gstfilesink.h:
+ filesink: Implement buffering internally
+ We use writev() so every call ends up going to the kernel but for small
+ buffers we generally would prefer to do as few write calls as possible.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794173
+
+2018-08-14 10:58:26 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstfilesink.c:
+ * plugins/elements/gstfilesink.h:
+ filesink: Remove buffer, deprecate line-buffer mode and don't use fflush()
+ fflush() has no effect because we use writev() directly, so fsync()
+ should be used instead which is actually flushing the kernel-side
+ buffers.
+ As a next step, a non-line-buffered buffering mode is to be added.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794173
+
+2018-08-14 12:30:19 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: Fixup for previous commit to prevent infinite loop if no events are pending
+
+2018-08-13 14:50:57 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: Return an error directly if negotiation of a sink pad failed
+ And don't give buffers to subclasses in that case.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796951
+
+2018-08-12 22:57:41 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * Makefile.am:
+ * win32/MANIFEST:
+ * win32/README.txt:
+ * win32/common/libgstbase.def:
+ * win32/common/libgstcontroller.def:
+ * win32/common/libgstnet.def:
+ * win32/common/libgstreamer.def:
+ win32: remove .def file with exports
+ They're no longer needed, symbol exporting is now explicit
+ via GST_*_API export decorators in all cases, that is
+ autotools and meson, incl. MSVC.
+
+2018-08-12 19:04:51 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * configure.ac:
+ * gst/printf/Makefile.am:
+ * libs/gst/check/gstcheck.c:
+ autotools: stop controlling symbol visibility with -export-symbols-regex
+ Instead, use -fvisibility=hidden and explicit exports via GST_EXPORT.
+ This should result in consistent behaviour for the autotools and
+ Meson builds where this is done already, and will allow us to drop
+ the win32 .def files.
+
+2018-08-12 20:07:02 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ bitwriter: fix g-i scanner warning
+ gstbitwriter.h:45: Warning: GstBase: "@bit_capacity" parameter unexpected at this location:
+ * @bit_capacity: Capacity of the allocated @data
+
+2018-08-11 18:17:29 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/check/meson.build:
+ * meson.build:
+ * meson_options.txt:
+ meson: add options to disable gobject cast checks and glib asserts
+ And match what we do for autotools here currently.
+
+2018-08-10 09:22:51 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: define G_DISABLE_DEPRECATED for development versions
+ Like in autotools.
+
+2018-08-10 01:23:35 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/meson.build:
+ * meson_options.txt:
+ * pkgconfig/meson.build:
+ * tests/check/meson.build:
+ meson: add option to disable build of GStreamer unit test library
+
+2018-08-10 00:33:58 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: add memory-alignment option
+
+2018-08-10 00:18:55 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: add option to disable command-line option parsing
+
+2018-08-10 00:08:43 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/meson.build:
+ * gst/parse/meson.build:
+ * meson_options.txt:
+ * tests/check/meson.build:
+ * tools/meson.build:
+ meson: add option to disable parse-launch pipeline string parser
+
+2018-08-09 23:32:49 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ * tests/meson.build:
+ meson: add options to disable tests, examples, benchmarks and tools
+ And remove duplicate option 'poisoning' and unused 'build_tools' one.
+
+2018-08-03 13:18:12 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ configure: Enable poisoning by default for non-release builds
+
+2018-08-03 13:16:21 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstbufferlist.c:
+ * gst/gstcaps.c:
+ * gst/gstcontext.c:
+ * gst/gstdatetime.c:
+ * gst/gstevent.c:
+ * gst/gstmemory.c:
+ * gst/gstmessage.c:
+ * gst/gstpromise.c:
+ * gst/gstquery.c:
+ * gst/gstsample.c:
+ * gst/gsttaglist.c:
+ * gst/gsttoc.c:
+ * gst/gsturi.c:
+ gst: Add poisoning to more types
+
+2018-08-03 10:36:21 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: fix setting of extra checks option
+ It's checked for with #ifdef so setting it to 0 or 1
+ will always enable it.
+
+2018-08-03 10:35:07 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: add option to enable poisoning of deallocated objects
+
+2018-08-02 10:55:40 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gsttypefindhelper.c:
+ typefindhelper: Mark gst_type_find_helper_get_range_full() as Since 1.14.3
+
+2018-07-31 19:25:03 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * plugins/elements/gstinputselector.c:
+ inputselector: Forward LATENCY query to all sinkpads
+ Otherwise downstream will consider the pipeline not live if the active
+ pad is live, even though some inactive pads might be live and might
+ require a non-zero latency configuration.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796901
+
+2018-07-31 16:46:25 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Update pad offsets on the current event if the offset changed in pad probes
+ https://bugzilla.gnome.org/show_bug.cgi?id=796898
+
+2018-07-30 18:51:35 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Ensure that the pad is blocked for IDLE probes if they are called from the streaming thread too
+ IDLE probes that are directly called when being added will increase /
+ decrease the "number of IDLE probes running" counter around the call,
+ but when running from the streaming thread this won't happen.
+ This has the effect that when running from a streaming thread it is
+ possible to push serialized events or data out of the pad without
+ problems, but otherwise it would deadlock because serialized data would
+ wait for the IDLE probe to finish first (it is blocking after all!).
+ With this change it will now always consistently deadlock instead of
+ just every once in a while, which should make it obvious why this
+ happens and prevent racy deadlocks in application code.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796895
+
+2018-07-30 18:10:31 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gsttypefindhelper.c:
+ * libs/gst/base/gsttypefindhelper.h:
+ * plugins/elements/gsttypefindelement.c:
+ * win32/common/libgstbase.def:
+ typefind: Add new gst_type_find_helper_get_range_full() that returns flow return
+ And make use of it in the typefind element. It's useful to distinguish
+ between the different errors why typefinding can fail, and especially to
+ not consider GST_FLOW_FLUSHING as an actual error.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796894
+
+2018-07-27 23:22:42 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstaggregator.h:
+ aggregator: annotate GstAggregatorClass::update_src_caps
+
+2018-07-25 07:34:19 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ * tests/examples/controller/meson.build:
+ * tests/examples/streams/meson.build:
+ * tests/meson.build:
+ meson: Add feature options for optional deps
+ Everything should be behind an option now.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795107
+
+2018-07-26 02:31:05 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: Don't leak peer pad of inactive pads when (not) forwarding QoS events to them
+
+2018-07-25 18:51:58 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * meson.build:
+ meson: Install bash completion helper in prefix
+ A regression was causing the helpers to be installed in /share which
+ would lead to permission denied error or PolicyKit to promtp for
+ permission. See:
+ 054fa3aa2 meson: Use new define_variable: feature instead of run_command()
+
+2018-07-25 16:00:28 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * libs/gst/check/meson.build:
+ * libs/gst/helpers/meson.build:
+ * meson.build:
+ meson: host_machine.system() is darwin even on iOS
+ Also use host_system everywhere.
+
+2018-07-25 14:25:07 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * libs/gst/helpers/meson.build:
+ * plugins/tracers/meson.build:
+ * tests/benchmarks/meson.build:
+ * tools/meson.build:
+ meson: Don't add static printf library to executables
+ They should only need to link to libgstreamer.
+
+2018-07-25 07:30:52 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * meson.build:
+ meson: Use new define_variable: feature instead of run_command()
+
+2018-07-25 07:29:51 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * meson.build:
+ meson: Small cleanup, unused variable
+
+2018-07-25 07:04:11 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * docs/gst/meson.build:
+ * docs/libs/meson.build:
+ * meson.build:
+ meson: Use copy: true for configure_file()
+ Fixes a warning.
+
+2018-07-25 01:12:49 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/base/gsttypefindhelper.c:
+ typefindhelper: Mark extension in gst_type_find_helper_get_range() as allow-none
+ It always allowed NULL and even said so in the documentation.
+
+2018-07-24 17:28:45 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/base/gsttypefindhelper.c:
+ * libs/gst/base/gsttypefindhelper.h:
+ * plugins/elements/gsttypefindelement.c:
+ * win32/common/libgstbase.def:
+ typefind: Add _with_extension() variants for typefinding data or a buffer
+ And make use of that in the typefind element to also be able to make use
+ of the extension in push mode. It previously only did that in pull mode
+ and this potentially speeds up typefinding and might also prevent false
+ positives.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796865
+
+2018-07-24 09:58:31 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpadtemplate.c:
+ * gst/gstparse.c:
+ * gst/parse/types.h:
+ gst: Simplify some boolean expressions
+ (!x || (x && y)) is the same as (!x || y)
+ https://bugzilla.gnome.org/show_bug.cgi?id=796847
+
+2018-07-23 23:17:54 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ * tests/check/gst/gstpad.c:
+ Revert "pad: Handle changing sticky events in pad probes"
+ This reverts commit 11e0f451eb498e92d05d8208f7217625dc62848b.
+ When pushing a sticky event out of a pad with a pad probe or pad offset,
+ those should not be applied to the event that is actually stored in the
+ event but only in the event sent downstream. The pad probe and pad
+ offsets are conceptually *after* the pad, added by external code and
+ should not affect any internal state of pads/elements.
+ Also storing the modified event has the side-effect that a re-sent event
+ would arrive with any previous modifications done by the same pad probe
+ again inside that pad probe, and it would have to check if its
+ modifications are already applied or not.
+ For sink pads and generally for events arriving in a pad, some further
+ changes are still needed and those are tracked in
+ https://bugzilla.gnome.org/show_bug.cgi?id=765049
+ In addition, the commit also had a refcounting problem with events,
+ causing already destroyed events to be stored inside pads.
+
+2018-07-20 23:51:44 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * gst/gstbus.c:
+ bus: add missing (out) annotation to get_poll_fd()
+
+2018-07-18 21:13:57 -0400 Thibault Saunier <tsaunier@igalia.com>
+
+ * libs/gst/base/gstbasetransform.c:
+ basetransform: Do not check if NULL is an emtpy caps
+ gst_base_transform_transform_caps can return NULL in various conditions
+ thus we should not treat its result as valid caps.
+ In all other places NULL is properly handled.
+
+2018-07-16 11:51:05 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * libs/gst/base/gstbasesink.c:
+ sink: Only add processing latency if upstream is live
+ Only add it if upstream is live, otherwise leave the latency at 0.
+ https://bugzilla.gnome.org/show_bug.cgi?id=640610
+
+2018-07-16 11:50:36 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * tests/check/gst/gstpipeline.c:
+ pipeline tests: Add test for processing latency
+
+2018-07-13 08:53:53 -0400 Thibault Saunier <tsaunier@igalia.com>
+
+ * tools/gst-inspect.c:
+ gst-inspect: Sort properties names
+ Making it simpler to find properties you are looking for when reading.
+
+2018-07-13 08:52:55 -0400 Thibault Saunier <tsaunier@igalia.com>
+
+ * libs/gst/base/gstbasesink.c:
+ basesink: Minor GI warning fix.
+
+2018-07-10 08:48:47 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstsample.c:
+ sample: Set buffer/caps/buffer-lists to NULL correctly when replacing them with NULL
+
+2018-06-29 07:16:28 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstbufferlist.c:
+ * tests/check/gst/gstbufferlist.c:
+ bufferlist: Prevent gst_buffer_list_foreach() from modifying non-writeable lists
+ Previously gst_buffer_list_foreach() could modify (drop or replace)
+ buffers in non-writable lists, which could cause all kinds of problems
+ if other code also has a reference to the list and assumes that it stays
+ the same.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796692
+
+2018-06-29 07:16:28 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/gst/gstbuffer.c:
+ buffer: Add test to ensure that memories in a non-writable buffer are not writable
+ https://bugzilla.gnome.org/show_bug.cgi?id=796692
+
+2018-06-28 14:13:39 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/gst/gstbufferlist.c:
+ bufferlist: Add test to ensure that buffers in an non-writable list are not writable
+ https://bugzilla.gnome.org/show_bug.cgi?id=796692
+
+2018-07-03 20:07:31 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstbuffer.c:
+ * gst/gstbufferlist.c:
+ * gst/gstminiobject.c:
+ * gst/gstminiobject.h:
+ * gst/gstsample.c:
+ * win32/common/libgstreamer.def:
+ miniobject: Add parent pointers to the miniobject to influence writability
+ Every container of miniobjects now needs to store itself as parent in
+ the child object, and remove itself again at a later time.
+ A miniobject is only writable if there is at most one parent, and that
+ parent is writable itself, and if the reference count of the miniobject
+ is 1.
+ GstBuffer (for memories), GstBufferList (for buffers) and GstSample (for
+ caps, buffer, bufferlist) was updated accordingly.
+ Without this it was possible to have e.g. a bufferlist with refcount 2
+ in two places, modifying the same buffer with refcount 1 at the same
+ time.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796692
+
+2018-07-08 20:52:08 -0400 Thibault Saunier <tsaunier@igalia.com>
+
+ * libs/gst/check/gstcheck.h:
+ check: Add a fail_unless_equals_clocktime macro for convenience
+
+2018-07-07 09:15:58 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * win32/common/libgstbase.def:
+ base: Add processing deadline API to win32 def
+ https://bugzilla.gnome.org/show_bug.cgi?id=640610
+
+2015-05-04 17:30:17 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * libs/gst/base/gstbasesink.c:
+ * libs/gst/base/gstbasesink.h:
+ basesink: Add processing deadline
+ The processing deadline is the acceptable amount of time to process the media
+ in a live pipeline before it reaches the sink. This is on top of the algorithmic
+ latency that is normally reported by the latency query. This should make
+ pipelines such as "v4lsrc ! xvimagesink" not claim that all frames are late
+ in the QoS events. Ideally, this should replace max_lateness for most applications.
+ https://bugzilla.gnome.org/show_bug.cgi?id=640610
+
+2018-04-01 16:06:26 +0200 Bastian Köcher <git@kchr.de>
+
+ * gst/meson.build:
+ * libs/gst/check/meson.build:
+ * libs/gst/controller/meson.build:
+ gstreamer: fix install dir for configure files
+ Nixos installs into a non-standard includedir.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794856
+
+2018-07-04 14:00:35 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * gst/gststructure.c:
+ structure: Update doc error in ARRAY/LIST helpers
+
+2018-06-22 15:35:42 +0100 Philippe Normand <philn@igalia.com>
+
+ * gst/gstprotection.c:
+ protection: Release decryptors list, even if it's empty
+ https://bugzilla.gnome.org/show_bug.cgi?id=796651
+
+2018-06-23 17:01:09 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstallocator.c:
+ * gst/gstbin.c:
+ * gst/gstbufferpool.c:
+ * gst/gstbus.c:
+ * gst/gstclock.c:
+ * gst/gstcontrolbinding.c:
+ * gst/gstdevice.c:
+ * gst/gstdevicemonitor.c:
+ * gst/gstdeviceprovider.c:
+ * gst/gstghostpad.c:
+ * gst/gstpad.c:
+ * gst/gstpipeline.c:
+ * gst/gstplugin.c:
+ * gst/gstregistry.c:
+ * gst/gststreamcollection.c:
+ * gst/gststreams.c:
+ * gst/gstsystemclock.c:
+ * gst/gsttask.c:
+ * gst/gsttracer.c:
+ * libs/gst/base/gstaggregator.c:
+ * libs/gst/base/gstbaseparse.c:
+ * libs/gst/base/gstbasesink.c:
+ * libs/gst/base/gstbasesrc.c:
+ * libs/gst/base/gstbasetransform.c:
+ * libs/gst/base/gstcollectpads.c:
+ * libs/gst/base/gstdataqueue.c:
+ * libs/gst/check/gsttestclock.c:
+ * libs/gst/controller/gstinterpolationcontrolsource.c:
+ * libs/gst/controller/gstlfocontrolsource.c:
+ * libs/gst/controller/gsttriggercontrolsource.c:
+ * libs/gst/net/gstnetclientclock.c:
+ * libs/gst/net/gstnettimeprovider.c:
+ * libs/gst/net/gstptpclock.c:
+ * tests/check/gst/gstdevice.c:
+ Update for g_type_class_add_private() deprecation in recent GLib
+ https://gitlab.gnome.org/GNOME/glib/merge_requests/7
+
+2018-06-18 16:29:18 +0200 Edward Hervey <edward@centricular.com>
+
+ * plugins/elements/gstconcat.c:
+ concat: Properly forward the SEGMENT seqnum
+
+2018-06-11 10:22:39 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstevent.c:
+ event: Unset SNAP flags when creating a new seek event without KEY_UNIT flag
+ The SNAP flags only make sense in combination with the KEY_UNIT flag,
+ and without they expose all kinds of unexpected behaviour in various
+ elements that don't expect this from happening.
+ Also warn if this ever happens.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796558
+
+2018-06-18 09:17:36 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstevent.c:
+ event: Require writable events for setting the running-time-offset and sequence number
+ Otherwise multiple code paths with the same event could change the
+ values on each other.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796615
+
+2018-03-15 12:43:56 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * gst/gststructure.c:
+ * tests/check/gst/gststructure.c:
+ gst_structure_to_string: display actual value of pointers
+ We used to always display "NULL" which was pretty confusing when
+ debugging.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794355
+
+2018-06-13 16:27:24 -0400 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gststreams.c:
+ stream: Add some missing API safe guards
+
+2018-06-08 17:58:43 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstpoll.c:
+ poll: minor docs clarification
+ 'Not implemented' could be misinterpreted to mean that
+ the API doesn't even exist there.
+
+2018-06-08 17:57:01 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstreamer.def:
+ win32: update for new API
+
+2018-04-05 12:40:09 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * gst/gstpoll.c:
+ * gst/gstpoll.h:
+ poll: add API to watch for POLLPRI
+ Windows doesn't seem to have an equivalent of POLLPRI so disabled those
+ functions on this platform.
+ This API can be used, for example, to wait for video4linux events which
+ are using POLLPRI.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794977
+
+2018-04-05 12:19:39 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * gst/gstpoll.c:
+ poll: stop treating on POLLPRI as 'read'
+ Current code was considering "can read" as having either POLLIN or POLLPRI being
+ set.
+ This may lead to client being awaken because of POLLPRI, starting a blocking
+ read and getting stuck because there is actually nothing to read.
+ This patch removes POLLPRI handling in read code and I'll add specific
+ API to wait for POLLPRI.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794977
+
+2018-06-05 17:02:18 +0200 Edward Hervey <edward@centricular.com>
+
+ * libs/gst/base/gstbaseparse.c:
+ baseparse: Ensure seqnum consistency
+ We need all relevant events of a segment to have consistent seqnum:
+ * GST_EVENT_SEGMENT
+ * GST_EVENT_EOS
+ If we are push-based and create a new segment, use the same seqnum
+ as the upstream event.
+ If we are pull-based, use the seqnum of that newly created segment
+ event everywhere
+
+2018-06-05 17:01:05 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstmessage.c:
+ message: Only allow setting valid seqnum on messages
+ If we want to make sure we never end up with invalid seqnum on
+ messages let's forbid setting them.
+
+2018-06-05 16:59:50 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstevent.c:
+ event: Only allow setting valid seqnum on events
+ If we want to make sure we never end up with invalid seqnum on
+ events let's forbid setting them.
+
+2018-06-05 16:58:21 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstbin.c:
+ bin: Make sure we don't use invalid seqnums on messages
+ There is a possibility that the accumlation functions don't set
+ a seqnum. Make sure we only set/override the seqnum of the new
+ messages if we *have* a valid upstream seqnum to use
+
+2018-06-02 14:02:19 +0200 Dimitrios Katsaros <patcherwork@gmail.com>
+
+ * plugins/elements/gstqueue2.c:
+ * plugins/elements/gstqueue2.h:
+ queue2: use GstQueueArray
+ When using queue2 as a queue it was using GQueue with
+ individually allocated queue items, so two allocs for
+ each item. With GstQueueArray we can avoid those.
+ https://bugzilla.gnome.org/show_bug.cgi?id=796483
+
+2018-06-03 19:37:40 +0200 Mike Wey <mike.wey@gtkd.org>
+
+ * libs/gst/base/gstdataqueue.c:
+ dataqueue: add some missing introspection annotations
+ https://bugzilla.gnome.org/show_bug.cgi?id=796488
+
+2018-05-30 14:06:06 +0200 Edward Hervey <edward@centricular.com>
+
+ * libs/gst/base/gstbaseparse.c:
+ * libs/gst/base/gstbaseparse.h:
+ baseparse: Documentation improvements
+ * Remove references to old functions and methods
+ * Use proper #ClassName.vmethod() decorator for vmethod
+
+2018-05-22 16:30:58 +0200 Thibault Saunier <tsaunier@igalia.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: Add an option to activate extra checks
+ And activate them by default as with autotools
+
+2018-05-21 23:10:21 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: rename gtkdoc option to gtk_doc
+
+2018-05-21 11:37:00 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstdatetime.c:
+ datetime: Update/fix documentation
+
+2018-05-21 11:36:42 +0200 Edward Hervey <edward@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstsample.c:
+ * gst/gstsample.h:
+ sample: Update documentation
+
+2018-05-21 11:16:29 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstpadtemplate.h:
+ gst: Add an example to GST_STATIC_PAD_TEMPLATE macro
+
+2018-05-21 09:14:37 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * gst/gstmeta.c:
+ * gst/gstprotection.c:
+ gst: add some GIR array annotations
+
+2018-05-20 14:07:15 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ * meson_options.txt:
+ meson: add 'nls' option to disable translations
+ And enable by default. Was implicitly disabled because
+ ENABLE_NLS was not defined.
+
+2018-05-16 23:25:26 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstbase.def:
+ win32: update for new aggregator API
+ Fixes make distcheck.
+
+2018-05-05 10:46:09 +0200 Olivier Crête <olivier.crete@collabora.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/base/gstaggregator.c:
+ * libs/gst/base/gstaggregator.h:
+ aggregator: Add get_next_time function for live streams
+ Add a function to do the right thing for live streams.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795486
+
+2018-05-10 00:05:51 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Fix race condition causing the same probe to be called multiple times
+ Probes were remembering a cookie that was used to check if the probe was
+ already called this time before the probes list changed. However the
+ same probes could've been called by another thread in between and thus
+ gotten a new cookie, and would then be called a second time.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795987
+
+2018-05-04 09:29:22 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstregistrybinary.c:
+ * libs/gst/helpers/gst-ptp-helper.c:
+ gst: Use memcpy() instead of strncpy() where appropriate
+ strncpy() is assumed to be for strings so the compiler assumes that
+ it will need an extra byte for the string-terminaning NULL.
+ For cases where we know it's actually "binary" data, just copy it
+ with memcpy.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795756
+
+2018-05-07 10:47:00 +0900 Seungha Yang <seungha.yang@navercorp.com>
+
+ * libs/gst/base/gstbitwriter.h:
+ bitwriter: Fix build error
+ Fix implicit-function-declaration warning for meemst and memcpy
+ gstbitwriter.h:166:3: error: implicit declaration of function ‘memset’
+ memset (bitwriter->data + clear_pos, 0, (new_bit_size >> 3) - clear_pos);
+ ^
+ https://bugzilla.gnome.org/show_bug.cgi?id=795867
+
+2018-05-07 01:32:14 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/gstevent.h:
+ gstevent: Add some FIXME: 2.0 about removing the timestamp
+ The timestamp field isn't valuable or used well anywhere. We
+ should remove it for GStreamer 2.0
+ https://bugzilla.gnome.org/show_bug.cgi?id=761462
+
+2014-03-18 16:01:04 +0200 Sreerenj Balachandran <sreerenj.balachandran@intel.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/libs/.gitignore:
+ * tests/check/libs/bitwriter.c:
+ * tests/check/meson.build:
+ bitwriter: Add unit tests
+ https://bugzilla.gnome.org/show_bug.cgi?id=707543
+
+2013-11-12 15:00:51 +0800 Wind Yuan <feng.yuan@intel.com>
+
+ * docs/libs/gstreamer-libs-docs.sgml:
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/base/Makefile.am:
+ * libs/gst/base/gstbitwriter-docs.h:
+ * libs/gst/base/gstbitwriter.c:
+ * libs/gst/base/gstbitwriter.h:
+ * libs/gst/base/meson.build:
+ * win32/common/libgstbase.def:
+ bitwriter: Add a generic bit writer
+ GstBitWriter provides a bit writer that can write any number of
+ bits into a memory buffer. It provides functions for writing any
+ number of bits into 8, 16, 32 and 64 bit variables.
+ https://bugzilla.gnome.org/show_bug.cgi?id=707543
+
+2018-05-05 19:08:09 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * gst/meson.build:
+ * libs/gst/helpers/meson.build:
+ * meson.build:
+ * meson_options.txt:
+ * plugins/meson.build:
+ * plugins/tracers/meson.build:
+ * tests/check/meson.build:
+ * tests/meson.build:
+ meson: Update option names to omit disable_ and with- prefixes
+ Also yield common options to the outer project (gst-build in our case)
+ so that they don't have to be set manually.
+
+2018-05-05 16:16:45 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstbufferlist.c:
+ * tests/check/gst/gstbufferlist.c:
+ bufferlist: fix abort due to underflow when creating 0-sized list
+ gst_buffer_list_new_sized(0) will cause an underflow in a calculation
+ which then makes it try to allocate huge amounts of memory, which
+ may lead to aborts.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795758
+
+2018-05-05 12:16:07 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * scripts/create-uninstalled-setup.sh:
+ scripts: create-uninstalled-setup: remove dead wiki link, mention gst-build
+ https://bugzilla.gnome.org/show_bug.cgi?id=795734
+
+2018-05-05 11:32:12 +0200 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: since marker for new API
+ Was also backported.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795332
+
+2018-05-04 14:00:21 +0200 Francisco Velazquez <francisv@ifi.uio.no>
+
+ * gst/gstdebugutils.h:
+ debugutils: Update configure option in documentation
+ Update documentation on non existent option `gst-enable-gst-debug'. Instead,
+ one has to make sure that the `--disable-gst-debug' option was not used when
+ compiling GStreamer (i.e., `./configure --disable-gst-debug').
+ https://bugzilla.gnome.org/show_bug.cgi?id=795801
+
+2018-04-27 12:41:58 -0400 luz.paz <luzpaz@users.noreply.github.com>
+
+ * docs/random/typefind:
+ * docs/random/wtay/capsnego-cases:
+ * docs/random/wtay/events2:
+ * gst/gstelement.c:
+ * libs/gst/base/gstbasesink.c:
+ * tests/check/gst/gstpreset.c:
+ Source code typo fixes
+ https://bugzilla.gnome.org/show_bug.cgi?id=795610
+
+2018-04-27 12:40:31 -0400 luz.paz <luzpaz@users.noreply.github.com>
+
+ * configure.ac:
+ * docs/libs/gstreamer-libs-docs.sgml:
+ * docs/random/TODO-pre-0.9:
+ * docs/random/autoplug1:
+ * docs/random/autoplug2:
+ * docs/random/bbb/streamselection:
+ * docs/random/caps:
+ * docs/random/caps2:
+ * docs/random/company/clocks:
+ * docs/random/company/gstdata:
+ * docs/random/company/gstparse:
+ * docs/random/company/gvadec.txt:
+ * docs/random/company/tagging:
+ * docs/random/company/time:
+ * docs/random/ds/0.9-planning2:
+ * docs/random/dynpads:
+ * docs/random/ensonic/distributed.txt:
+ * docs/random/ensonic/dparams.txt:
+ * docs/random/ensonic/draft-bufferpools.txt:
+ * docs/random/ensonic/draft-registry-change-hooks.txt:
+ * docs/random/ensonic/dynlink.txt:
+ * docs/random/ensonic/embedded.txt:
+ * docs/random/ensonic/interfaces.txt:
+ * docs/random/ensonic/lazycaps.txt:
+ * docs/random/ensonic/logging.txt:
+ * docs/random/ensonic/media-device-daemon.txt:
+ * docs/random/ensonic/profiling.txt:
+ * docs/random/error:
+ * docs/random/events:
+ * docs/random/gdp:
+ * docs/random/matth/scheduling.txt:
+ * docs/random/negotiation:
+ * docs/random/old/ChangeLog.gstreamer:
+ * docs/random/omega/TODO-0.1.0:
+ * docs/random/omega/caps2:
+ * docs/random/omega/plan-generation:
+ * docs/random/omega/sched-commit1:
+ * docs/random/omega/sched2:
+ * docs/random/phonon-gst:
+ * docs/random/plan-0.11.txt:
+ * docs/random/plugins:
+ * docs/random/porting-to-1.0.txt:
+ * docs/random/queue:
+ * docs/random/rtp:
+ * docs/random/thomasvs/0.10:
+ * docs/random/thomasvs/packaging:
+ * docs/random/types:
+ * docs/random/types2:
+ * docs/random/types3:
+ * docs/random/uraeus/gstreamer_and_midi.txt:
+ * docs/random/wtay/CORBA:
+ * docs/random/wtay/autoplug2:
+ * docs/random/wtay/caps-negociation:
+ * docs/random/wtay/capsnego2:
+ * docs/random/wtay/capsnego2-docs:
+ * docs/random/wtay/clocking:
+ * docs/random/wtay/eos2:
+ * docs/random/wtay/events:
+ * docs/random/wtay/events3:
+ * docs/random/wtay/interactivity:
+ * docs/random/wtay/messages:
+ * docs/random/wtay/namespaces:
+ * docs/random/wtay/negotiation3:
+ * docs/random/wtay/padprobes:
+ * docs/random/wtay/pipelineinfo:
+ * docs/random/wtay/plugin_guidelines:
+ * docs/random/wtay/registry:
+ * docs/random/wtay/scheduling_ideas:
+ * docs/random/wtay/threading:
+ * docs/random/wtay/threads_hilevel:
+ * docs/random/wtay/timecache:
+ * gst/gst.c:
+ * gst/gstbin.c:
+ * gst/gstcapsfeatures.c:
+ * gst/gstdebugutils.c:
+ * gst/gstdebugutils.h:
+ * gst/gstdevice.h:
+ * gst/gstdeviceprovider.c:
+ * gst/gstelement.c:
+ * gst/gstelement.h:
+ * gst/gstevent.c:
+ * gst/gstinfo.h:
+ * gst/gstmemory.c:
+ * gst/gstmessage.h:
+ * gst/gstminiobject.c:
+ * gst/gstobject.c:
+ * gst/gstpad.c:
+ * gst/gstpreset.c:
+ * gst/gstregistrybinary.c:
+ * gst/gstregistrychunks.c:
+ * gst/gstsegment.c:
+ * gst/gststreams.c:
+ * gst/gsttaglist.c:
+ * gst/gsttracerrecord.h:
+ * gst/gsttracerutils.c:
+ * gst/gsttypefindfactory.c:
+ * gst/gsturi.c:
+ * gst/gstutils.c:
+ * gst/gstvalue.c:
+ * gst/parse/grammar.y:
+ * hooks/pre-commit.hook:
+ * libs/gst/base/gstbasetransform.c:
+ * libs/gst/base/gstcollectpads.c:
+ * libs/gst/base/gstcollectpads.h:
+ * libs/gst/base/gstflowcombiner.c:
+ * libs/gst/base/gstindex.c:
+ * libs/gst/check/gstcheck.h:
+ * libs/gst/check/gstharness.c:
+ * libs/gst/check/libcheck/check.h.in:
+ * libs/gst/check/libcheck/check_impl.h:
+ * libs/gst/controller/gstinterpolationcontrolsource.c:
+ * libs/gst/controller/gsttimedvaluecontrolsource.c:
+ * libs/gst/net/gstptpclock.c:
+ * plugins/elements/gstcapsfilter.c:
+ * plugins/elements/gstconcat.c:
+ * plugins/elements/gstinputselector.c:
+ * plugins/elements/gstmultiqueue.c:
+ * plugins/elements/gsttee.c:
+ * plugins/elements/gsttypefindelement.c:
+ * plugins/tracers/gstlatency.c:
+ * scripts/gst-plot-traces.sh:
+ * tests/check/elements/funnel.c:
+ * tests/check/elements/selector.c:
+ * tests/check/elements/streamiddemux.c:
+ * tests/check/gst/gstbuffer.c:
+ * tests/check/gst/gstmemory.c:
+ * tests/check/gst/gstmessage.c:
+ * tests/check/gst/gstpad.c:
+ * tests/check/libs/aggregator.c:
+ * tests/examples/helloworld/helloworld.c:
+ Fix typos in comments and docs
+ Found via `codespell`
+ https://bugzilla.gnome.org/show_bug.cgi?id=795610
+
+2018-04-25 19:47:11 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstbase.def:
+ win32: add new symbol
+
+2018-04-25 14:30:04 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * libs/gst/base/gstaggregator.c:
+ aggregator: Improve doc for gst_aggregator_pad_has_buffer
+
+2018-04-23 11:34:19 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/base/gstaggregator.c:
+ * libs/gst/base/gstaggregator.h:
+ aggregator: Add API to check if a pad has a new buffer
+ https://bugzilla.gnome.org/show_bug.cgi?id=795332
+
+2018-04-25 18:28:00 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstbuffer.c:
+ buffer: don't over-allocate internal GstMeta items
+ We would allocate space for two GstMeta structs even though
+ there is only one in the end (the one in GstMetaItem and in
+ GstFooMeta overlap).
+
+2018-03-23 12:48:37 -0400 Xavier Claessens <xavier.claessens@collabora.com>
+
+ * gst/meson.build:
+ * libs/gst/base/meson.build:
+ * libs/gst/controller/meson.build:
+ * libs/gst/net/meson.build:
+ * meson.build:
+ * meson_options.txt:
+ * plugins/elements/meson.build:
+ Meson: Use library() to build both static and shared libs
+ Meson supports building both static and shared libraries in a single
+ library() call. It has the advantage of reusing the same .o objects and
+ thus avoid double compilation.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794627
+
+2018-04-24 14:37:40 -0400 Xavier Claessens <xavier.claessens@collabora.com>
+
+ * meson.build:
+ Meson: Fix check for linker args
+ https://bugzilla.gnome.org/show_bug.cgi?id=795513
+
+2018-04-22 19:23:50 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * pkgconfig/gstreamer-uninstalled.pc.in:
+ pkgconfig: set pluginsdir to plugins/ sub-directory for uninstalled .pc file
+ So we don't unnecessarily scan directories that have no plugins
+ (or try to open libs). Matches how we limit the search space for
+ plugin modules to gst/ ext/ sys/ subdirs.
+
+2018-04-20 12:30:24 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: fix invalid keyword argument warnings
+ cc.compiles() doesn't have a 'prefix' argument (yet) and the
+ prefix has already been prepended to the source code snippets.
+ https://github.com/mesonbuild/meson/issues/2364
+
+2018-04-18 11:35:20 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstevent.c:
+ Revert "docs: Minor fix in event_new_select_streams"
+ This reverts commit f218917d02760f8f32a35e4e635e23230c47c0c6.
+
+2018-04-17 20:03:09 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstevent.c:
+ docs: Minor fix in event_new_select_streams
+
+2018-04-17 11:24:31 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * plugins/elements/gstinputselector.c:
+ * plugins/elements/gstmultiqueue.c:
+ multiqueue, inputselector: show pad properties in gst-inspect-1.0
+
+2018-04-17 11:01:09 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * plugins/elements/gstinputselector.c:
+ * plugins/elements/gstoutputselector.c:
+ inputselector, outputselector: add guards for wrong pads being set as active pads
+ Catch users wrongly setting foreign pads or wrong pads as
+ the selector's active pad, which leads to all kinds of
+ other issues. It's a programming error so handle it just
+ like we would if we had direct API.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795309
+
+2018-04-17 14:00:20 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstcaps.c:
+ * gst/gstcaps.h:
+ caps: Add a macro based variant of gst_caps_copy
+ This way we do not hit the performance overhead of having the method
+ not inlined but still can use it from bindings.
+
+2018-04-16 16:30:27 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstpad.c:
+ * tests/check/gst/gstpad.c:
+ pad: Handle changing sticky events in pad probes
+ In the case where the user sets a new padprobeinfo->data in a probe
+ where the data is a sticky event, the new sticky event should be automatically
+ sticked on the probed pad.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795330
+
+2018-04-17 09:33:02 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstinfo.c:
+ debug: Make PADS debug background blue
+ Red on red was... suboptimal!
+ https://bugzilla.gnome.org/show_bug.cgi?id=795330
+
+2018-04-17 17:00:53 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstreamer.def:
+ win32: update defs for new exports
+
+2018-04-16 16:27:57 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * libs/gst/check/gstharness.c:
+ harness: Handle harness->element not being a GstBin
+ It is totally valid but in gst_harness_find_element we were not
+ handling that case.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795308
+
+2018-04-04 17:36:57 -0300 Thibault Saunier <tsaunier@igalia.com>
+
+ * gst/gstcaps.c:
+ * gst/gstcaps.h:
+ gst: Stop inlining gst_caps_copy
+ This way it gets exposed to bindings through GObject Introspection.
+
+2018-04-16 10:52:46 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * README:
+ * common:
+ Automatic update of common submodule
+ From f0c2dc9 to ed78bee
+
+2018-04-15 00:49:55 +0200 Aurelien Jarno <aurelien@aurel32.net>
+
+ * gst/gstconfig.h.in:
+ gstconfig.h.in: initial RISC-V support
+ RISC-V supports unaligned accesses, but these might run extremely slowly
+ depending on the implementation. Therefore set GST_HAVE_UNALIGNED_ACCESS
+ to 0 on this architecture.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795271
+
+2018-04-11 17:16:54 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstadapter.c:
+ adapter: port the buffer list from GSList to GstQueueArray
+ Significantly reduces the amount of memory allocation operations.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795167
+
+2018-04-11 15:38:36 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * docs/libs/gstreamer-libs-sections.txt:
+ * libs/gst/base/gstqueuearray.c:
+ * libs/gst/base/gstqueuearray.h:
+ * tests/check/libs/queuearray.c:
+ * win32/common/libgstbase.def:
+ API: gst_queue_array_peek_nth
+ https://bugzilla.gnome.org/show_bug.cgi?id=795157
+
+2018-04-11 13:44:33 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * libs/gst/base/gstqueuearray.c:
+ gstqueuearray: make find() return a 0-based index
+ And make the drop() functions expect a 0-based index too,
+ this addresses a longstanding FIXME. This will not break
+ backward compatibility, because the drop() functions
+ were previously only meant to be used with the index
+ returned by find().
+ https://bugzilla.gnome.org/show_bug.cgi?id=795156
+
+2018-04-11 00:49:02 +0200 Mathieu Duponchelle <mathieu@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ * gst/gstsample.c:
+ * gst/gstsample.h:
+ * win32/common/libgstreamer.def:
+ gstsample: new API
+ gst_sample_set_buffer
+ gst_sample_set_caps
+ gst_sample_set_segment
+ gst_sample_set_info
+ gst_sample_is_writable
+ gst_sample_make_writable
+ This commit makes it possible to reuse a sample object and avoid
+ unnecessary memory allocations, for example in appsink.
+ In addition, writability is now required to set the buffer list.
+ https://bugzilla.gnome.org/show_bug.cgi?id=795144
+
+2018-04-13 20:15:46 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * libs/gst/base/gstbaseparse.c:
+ * libs/gst/base/gstbytereader.c:
+ * libs/gst/base/gstbytewriter.c:
+ * libs/gst/base/gstcollectpads.c:
+ * libs/gst/base/gstcollectpads.h:
+ * libs/gst/base/gsttypefindhelper.c:
+ * libs/gst/base/gsttypefindhelper.h:
+ base: fix some GIR annotations
+ Mostly related to out parameters and their transfer
+
+2018-03-29 18:59:43 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * gst/gstbuffer.c:
+ * gst/gstutils.c:
+ gst: add some GIR array annotations
+
+2018-04-13 09:58:05 +0200 Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
+
+ * gst/gstdebugutils.c:
+ debugutils: Add missing parameters documentation
+
+2018-04-11 19:56:01 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstinfo.c:
+ gstdebug: fix occasional deadlocks on windows when outputting debug logging
+ When outputting debug logs on Windows, some sections are protected
+ with a non-recursive lock. Turns out though that gst_debug_message_get()
+ might indirectly, via our printf format extensions, call code which
+ in turn would try to log something when it can't handle something. If
+ that happens we end up in gst_debug_log_default() again recursively and
+ try to again take the lock that's already taken, thus deadlocking.
+ Format the debug message string outside of the critical section
+ instead to avoid this.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784382
+
+2018-04-09 14:19:19 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gsturi.h:
+ gsturi: include gstconfig.h earlier for GST_API define
+
+2018-03-27 10:25:46 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/gstinfo.c:
+ * tests/check/gst/gstinfo.c:
+ gstinfo: fix debug levels being applied in the wrong order
+ Remove unneeded reapplication of patterns. Besides being
+ superfluous (gst_debug_reset_threshold already applies
+ patterns) it was also wrong and didn't stop checking patterns
+ after the first match (broken in 67e9d139).
+ Also fix up unit test which checked for the wrong order.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794717
+
+2018-03-27 10:15:46 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/gstinfo.c:
+ gstinfo: Simplify gst_debug_reset_threshold() implementation
+ Replace the while+goto with a for+break and check walk to determine
+ whether we had a match. Move up the unlock to keep the locked section as
+ small as possible.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794717
+
+2018-03-27 10:14:27 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/gstinfo.c:
+ gstinfo: Reduce code duplication around level pattern matching
+ Move the match, logging and set_threshold to a new function.
+ The log levels are different, so choose the higher one (LOG). Having two
+ equivalent messages at two different levels seems like a bad idea
+ anyway.
+ https://bugzilla.gnome.org/show_bug.cgi?id=794717
+
+2018-03-27 17:16:05 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gststreamcollection.c:
+ streamcollection: embed GQueue into the private struct
+
+2018-04-02 12:44:15 +0200 Edward Hervey <edward@centricular.com>
+
+ * docs/libs/Makefile.am:
+ * docs/libs/gstreamer-libs-sections.txt:
+ docs: Update libs documentation
+ * Make sure all libcheck headers are ignored
+ * Add all missing symbols
+
+2018-04-02 12:43:57 +0200 Edward Hervey <edward@centricular.com>
+
+ * docs/gst/gstreamer-sections.txt:
+ docs: Update gst core doc
+
+2018-04-02 12:42:30 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/gstparamspecs.h:
+ * gst/gsttracerutils.h:
+ gst: Documentation fixes
+ * Fix copy-paste error for GstParamSpecArray documentation
+ * Use proper field name for tracer utils documentation
+
+2018-04-02 12:41:48 +0200 Edward Hervey <edward@centricular.com>
+
+ * libs/gst/base/gstaggregator.h:
+ * libs/gst/check/gstcheck.h:
+ libs: Documentation fixes
+ * Symbols not properly exposed or wrongly named
+
+2018-03-29 12:36:11 +1100 Matthew Waters <matthew@centricular.com>
+
+ * gst/gstbin.c:
+ bin: fix deep-element-added signal debug log message
+ Adding the bin to the child element doesn't really make sense.
+
+2018-03-22 13:00:21 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: bump meson req for gnome.mkenums_simple()
+
+2018-03-22 12:18:28 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/gstenumtypes.c.template:
+ * gst/gstenumtypes.h.template:
+ meson: remove no longer needed core enumtypes template files
+
+2017-07-20 18:12:43 +1000 Alessandro Decina <alessandro.d@gmail.com>
+
+ * Makefile.am:
+ * gst/meson.build:
+ meson: use gnome.mkenums_simple() to generate core enumtypes
+
+2017-07-20 13:03:55 +1000 Alessandro Decina <alessandro.d@gmail.com>
+
+ * Makefile.am:
+ * libs/gst/controller/controller_mkenum.py:
+ * libs/gst/controller/meson.build:
+ * meson.build:
+ meson: use gnome.mkenums_simple() to generate controller enumtypes
+
+2017-07-19 19:37:02 +1000 Alessandro Decina <alessandro.d@gmail.com>
+
+ * libs/gst/controller/meson.build:
+ meson: delete unused variable
+
+2018-03-21 20:02:50 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * tests/check/gst/gstbufferpool.c:
+ test: Pool now try to reset the size
+ As a side effect, buffers are no longer expected to be discarded on
+ resize.
+
+2016-11-14 15:35:50 +0100 Petr Kulhavy <brain@jikos.cz>
+
+ * gst/gstbufferpool.c:
+ gstbuffer: reset buffer to its original size if intact
+ Enhance default_reset_buffer() to resize the buffer to its full size if the
+ memory hasn't changed. This allows to reuse the buffer even if the offset has
+ changed or the size has shrunk, rather than freeing the buffer.
+ Change related to: https://bugzilla.gnome.org/show_bug.cgi?id=772841
+
+2018-03-21 10:20:14 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/net/net.h:
+ net: Include gstnetcontrolmessagemeta.h in net.h
+
+2018-03-21 10:13:44 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstparamspecs.h:
+ paramspecs: Set g-i annotation values for GST_PARAM_* constants
+
+2018-03-21 10:11:30 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstelementfactory.h:
+ elementfactory: GST_ELEMENT_FACTORY_TYPE_DECODABLE had DECRYPTOR added, update g-i annotation value
+
+2018-03-20 16:11:01 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstchildproxy.c:
+ * gst/parse/grammar.y:
+ gst: Fix compilation with latest GLib
+ g_object_ref() forwards the type of its argument nowadays.
+ ./grammar.y:409:14: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types]
+ gstchildproxy.c:212:7: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types]
+
+2018-03-20 09:02:34 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * docs/plugins/inspect/plugin-coretracers.xml:
+ * meson.build:
+ Back to development
+
=== release 1.14.0 ===
2018-03-19 20:09:51 +0000 Tim-Philipp Müller <tim@centricular.com>