+=== release 1.11.90 ===
+
+2017-04-07 Sebastian Dröge <slomo@coaxion.net>
+
+ * configure.ac:
+ releasing 1.11.90
+
+2017-04-07 15:06:30 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/el.po:
+ po: Update translations
+
+2017-04-06 12:01:00 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/audioparsers/gstaacparse.c:
+ aacparse: streamline and improve AudioSpecificConfig parsing
+ AudioSpecifigConfig is used in a variety of AAC streams but was
+ being parsed differently. Instead, make everyone use the same parsing.
+ * Remove unused 'bits' field (it was always set to 0 if present)
+ * Add proper GAConfig parsing (to know the number of samples per frame
+ if present).
+ Fixes wrong rate/channels configuration in streams coming from qtdemux
+ https://bugzilla.gnome.org/show_bug.cgi?id=780966
+
+2017-04-05 09:46:31 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * sys/v4l2/gstv4l2videodec.c:
+ v4l2videodec: Fix 32bit only printf format
+ The previous patch was using %llu for 64bits printf, which is 32bit
+ specific. We also trace the latency in time human readable form now.
+
+2016-03-16 16:22:48 +0100 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * sys/v4l2/gstv4l2object.c:
+ v4l2object: set streamparm for outputs that support it
+ Without a specified framerate from the sink, the decoder frame interval
+ should be set using the framerate of the encoded video stream.
+ Therefore, the v4l2object should be able to change the framerate on the
+ output if the V4L2 device accepts it.
+ This is also necessary for mem2mem encoders so that their bitrate
+ calculation code may work correctly and they may report the correct
+ frame duration on the capture queue.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779466
+
+2016-03-16 16:24:55 +0100 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * sys/v4l2/gstv4l2videodec.c:
+ v4l2videodec: only set latency if the frame duration is valid
+ If the duration of the v4l2object is GST_CLOCK_TIME_NONE, because the
+ sink did not specify a framerate in the caps and the driver accepts the
+ framerate, the decoder element uses GST_CLOCK_TIME_NONE to calculate and
+ set the element latency.
+ While this is a bug of the capture driver, the decoder element should
+ not use the invalid duration to calculate a latency, but print a warning
+ instead.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779466
+
+2016-11-23 12:17:55 -0500 Olivier Crête <olivier.crete@collabora.com>
+
+ * sys/v4l2/gstv4l2sink.c:
+ v4l2sink: Block in preroll_wait on unlock
+ The correct behaviour of anything stuck in the ->render() function
+ between ->unlock() and ->unlock_stop() is to call
+ gst_base_sink_wait_preroll() and only return an error if this returns an
+ error, otherwise, it must continue where it left off!
+ https://bugzilla.gnome.org/show_bug.cgi?id=774945
+
+2017-04-05 15:55:20 +1000 Jan Schmidt <jan@centricular.com>
+
+ * ext/vpx/gstvp9dec.c:
+ vp9dec: Add warnings for unsupported frame formats
+ At least output an element warning on the bus when we
+ encounter a frame format GStreamer doesn't currently support.
+
+2017-04-04 17:55:13 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/audioparsers/gstaacparse.c:
+ aacparse: Handle Parametric Stereo with HE-AAC(v2)
+ According to ISO/IEC:14496-2:2009 , in the case of HE-AACv2 (audioObjecType
+ 29) parametric stereo is used (a single mono track is used and then
+ transformations are applied to it to provide a stereo output).
+ We therefore report two channels in the case where there is one reported
+ in the audioChannelConfiguration.
+ Fixes the various issues where a demuxer would report two channels, but
+ then the parser would say there's only one channel, and then the decoder
+ would output two channels.
+
+2017-04-04 15:22:25 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Simplify buffer refcounting in add_buffer() and remove unneeded NULL checks
+
+2017-04-04 15:08:33 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Select the best pad based on the cached last_buf if any
+ last_buf is the one we're going to write next, not buf. As such we
+ should check timestamps against that one if there is one to select the
+ earliest pad.
+ Also remember the currently selected pad in the very beginning when
+ storing the first last_buf.
+ This both solves some edge cases where not the correct next pad was
+ selected corresponding to the target interleave.
+
+2017-04-04 15:07:40 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Error out immediately if a timecode is to be written but downstream return not-OK
+
+2017-04-03 11:34:49 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Update variables before early exit
+ This is an update of d78d5896272d78df41e696fac929e7dfb3bb3dfa
+ We still exit as early as possible in case of non-ok/non-unlinked combined
+ flow, but we first make sure that we update the internal position variables.
+ This ensures that if upstreams "ignores" the flow return (and carries on pushing),
+ we don't end up processing data with completely bogus variables/positions.
+
+2017-03-24 00:11:13 +1300 Douglas Bagnall <douglas@halo.gen.nz>
+
+ * gst/interleave/interleave.c:
+ * gst/interleave/interleave.h:
+ interleave: avoid using uninitialised ordering_map
+ If self->channel_positions == NULL (which seems unlikely),
+ self->default_channels_ordering_map will be used unintialised.
+ We avoid that by keeping track of the channel_mask, which is set when
+ the ordering map is initialised.
+ https://bugzilla.gnome.org/show_bug.cgi?id=780331
+
+2017-03-23 23:56:31 +1300 Douglas Bagnall <douglas@halo.gen.nz>
+
+ * gst/interleave/interleave.c:
+ interleave: don't overflow channel map with >64 channels
+ When there are more than 64 channels, we don't want to exceed the
+ bounds of the ordering_map buffer, and in these cases we don't want to
+ rempa at all. Here we avoid doing that.
+ https://bugzilla.gnome.org/show_bug.cgi?id=780331
+
+2017-03-28 14:23:16 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * tests/check/meson.build:
+ meson: Use get_pkgconfig_variable instead of calling pkg-config ourself
+ It is avalaible in meson 0.36 which is now are requirement
+
+2017-03-28 14:22:41 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * pkgconfig/gstreamer-plugins-good.pc.in:
+ * pkgconfig/meson.build:
+ pkgconfig: Do not ever build an installed .pc file
+
+2017-03-28 11:15:53 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * tests/check/meson.build:
+ meson: test: Fix environment object usage
+
+2017-03-28 11:14:47 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * meson.build:
+ * pkgconfig/gstreamer-plugins-good.pc.in:
+ * pkgconfig/meson.build:
+ pkgconfig: Generate the pkg-config with meson too
+
+2017-03-27 21:52:00 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: In gap mode, consider the mdat offset when calculating the remaining mdat size
+ The mdat generally does not start at offset 0, we have to include the
+ size of the moof and whatever else was in front of the mdat.
+
+2017-03-27 11:43:31 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atomsrecovery.c:
+ atomsrecovery: Error out when fseek() fails instead of silently ignoring
+ CID 1403262
+
+2017-03-23 22:13:05 +0100 Carlos Rafael Giani <dv@pseudoterminal.org>
+
+ * sys/v4l2/gstv4l2object.c:
+ v4l2object: Also add videometa if there is padding to the right and bottom
+ https://bugzilla.gnome.org/show_bug.cgi?id=780478
+
+2017-03-21 12:54:27 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtpmux.c:
+ rtpmux: fix output segment and buffer DTS to correspond to the flattened PTS
+ https://bugzilla.gnome.org/show_bug.cgi?id=780347
+
+2017-03-23 17:53:19 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ * gst/isomp4/gstqtmux.h:
+ qtmux: Remove some unused variables
+
+2017-03-23 15:01:16 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Remove a couple of unneeded levels of indentation
+
+2017-03-22 18:18:40 +0000 Enrique Ocaña González <eocanha@igalia.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: distinguish TFDT with value 0 from no TFDT at all
+ TFDTs with time 0 are being ignored since commit 1fc3d42f. They're
+ mistaken with the case of not having TFDT, but those two cases
+ must be distinguished in some way.
+ This patch passes an extra boolean flag when the TFDT is present.
+ This is now the condition being evaluated, instead of checking for
+ 0 time.
+ https://bugzilla.gnome.org/show_bug.cgi?id=780410
+
+2017-03-22 19:15:09 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Reset current chunk after writing out timecode
+ If we have multiple tracks with timecodes, or it's not the first track
+ that has timecodes, or not the first buffer, we already started a chunk
+ for media data. We now need to "close" that chunk because we wrote data
+ for the timecode track and a new chunk has to be started for the
+ original track the next time it has data.
+
+2017-03-22 18:52:51 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ * gst/isomp4/gstqtmux.h:
+ qtmux: Do timecode handling per track, not per muxer instance
+ There could be multiple video tracks with timecodes.
+
+2017-03-22 00:38:51 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ * gst/matroska/matroska-demux.c:
+ qtdemux: matroskademux: Ignore repeated seek events
+ Similar to what was done in adaptivedemux, ignore seek
+ events we've already handled - such as when they are received
+ on every srcpad of files with lots of streams.
+
+2017-03-21 14:55:32 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ * gst/isomp4/qtdemux.h:
+ dashdemux: Update mdatleft from overall mdatsize and offset when observing a gap
+ Otherwise mdatleft will have a value calculated from the initial
+ mdatsize minus the parts of the stream that we saw, which is not
+ including all the parts of the stream that might've been skipped.
+
+2017-03-20 17:03:32 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/soup/gstsouphttpsrc.c:
+ * gst/audioparsers/gstmpegaudioparse.c:
+ docs: update two references to the removed 'mad' plugin
+ https://bugzilla.gnome.org/show_bug.cgi?id=776140
+
+2017-03-20 12:03:29 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxqueue.c:
+ rtprtxqueue: add basic documentation and example pipelines
+ Mostly explaining the difference between rtprtxqueue and rtprtxsend.
+
+2017-03-17 20:58:28 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * sys/v4l2/meson.build:
+ v4l2: Fix meson plugin shared object name
+ It didn't match between AutoMake and Meson, and the Meson name
+ didn't math the plugin name (video4linux2).
+
+2017-03-16 18:20:54 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxreceive.c:
+ rtprtxreceive: fix example pipelines and improve the documentation
+ https://bugzilla.gnome.org/show_bug.cgi?id=771383
+
+2017-03-17 14:10:40 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst/audioparsers/gstflacparse.c:
+ * gst/audioparsers/gstflacparse.h:
+ flacparse: fix playback if sample number does not start at 0
+ This reverts commit 29b807685d3c962bbe8afe351c5dca97d59eb5e0, while
+ fixing the original breaking tests/check/pipelines/flacdec.
+
+2017-03-17 11:30:04 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst/audioparsers/gstflacparse.c:
+ * gst/audioparsers/gstflacparse.h:
+ Revert "flacparse: fix playback if sample number does not start at 0"
+ This breaks gst-validate on the build server (though not locally),
+ and a unit test, and I can't run unit tests right now for some
+ unrelated reason.
+ This reverts commit 0747b56f8e7f4731d67f8d13a4bdc453dde0fdf7.
+
+2017-03-16 17:44:41 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/rtpsession.c:
+ rtpsession: print the correct variable in debug statement
+ This debug statement is meant to print the time since the last (early)
+ RTCP transmission, not the last regular RTCP transmission (which also
+ happens to be set a few lines above to current_time, so the debug output
+ is just confusing)
+
+2017-03-16 17:42:27 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxsend.c:
+ rtprtxsend: convert LOG message to TRACE
+ This is printed too often (for every chained buffer!) and just clutters the logs.
+
+2017-03-16 14:58:45 +0100 Miguel París Díaz <mparisdiaz@gmail.com>
+
+ * gst/rtpmanager/rtpsource.c:
+ rtpsource: fix warning message
+ https://bugzilla.gnome.org/show_bug.cgi?id=780105
+
+2017-03-16 13:54:54 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst/audioparsers/gstflacparse.c:
+ * gst/audioparsers/gstflacparse.h:
+ flacparse: fix playback if sample number does not start at 0
+ https://bugzilla.gnome.org/show_bug.cgi?id=777738
+
+2017-03-15 18:58:55 +0100 Miguel París Díaz <mparisdiaz@gmail.com>
+
+ * gst/rtpmanager/rtpsource.c:
+ * gst/rtpmanager/rtpsource.h:
+ rtpsource: get clock-rate from pt if needed to generate SR
+ https://bugzilla.gnome.org/show_bug.cgi?id=780105
+
+2017-03-16 13:52:48 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/soup/gstsouphttpsrc.c:
+ souphttpsrc: Include GStreamer souphttpsrc version in default User-Agent string
+
+2017-03-16 00:41:44 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/rtp/gstrtph264depay.c:
+ rtph264depay: fix crash with empty sprops-parameters
+ https://bugzilla.gnome.org/show_bug.cgi?id=780040
+
+2017-03-11 21:20:40 -0800 Thiago Santos <thiagossantos@gmail.com>
+
+ * gst/isomp4/atomsrecovery.c:
+ * gst/isomp4/atomsrecovery.h:
+ atomsrecovery: also handle extra atoms after 'mdia' in a 'trak'
+ Take into account the atoms at the end of the 'trak' atom when
+ recovering it. So that its size (already computed and added in the trak
+ size) isn't making offsets wrong.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-11 12:56:33 -0800 Thiago Santos <thiagossantos@gmail.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: avoid fallthrough to moovrecovery failure section
+ Return before that to preserve our successfull results, otherwise no
+ moov recovery information would be written
+ https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-11 12:27:28 -0800 Thiago Santos <thiagossantos@gmail.com>
+
+ * gst/isomp4/atomsrecovery.c:
+ atomsrecovery: expect more atom types at the headers
+ Skip more atoms at the header until it finds the 'mdat' to continue the
+ moov recovery
+ https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-14 16:42:25 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * Makefile.am:
+ * configure.ac:
+ * tests/examples/Makefile.am:
+ * tests/examples/pulse/.gitignore:
+ * tests/examples/pulse/Makefile.am:
+ * tests/examples/pulse/pulse.c:
+ pulse example: Remove
+ That example only tested the property probe interface, which has been removed.
+ The same kind of thing can now be done with the generic gst-device-monitor tool.
+
+2017-03-14 16:38:02 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * sys/v4l2/gstv4l2object.h:
+ v4l2: Remove unused macro
+
+2017-03-14 16:35:25 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * sys/v4l2/gstv4l2object.c:
+ * sys/v4l2/gstv4l2object.h:
+ v4l2: Remove unused definitions
+
+2017-03-14 10:10:19 +0100 Emeric Grange <egrange@gopro.com>
+
+ * gst/isomp4/fourcc.h:
+ * gst/isomp4/gstqtmux.c:
+ * gst/isomp4/gstqtmuxmap.c:
+ * gst/isomp4/qtdemux.c:
+ * gst/isomp4/qtdemux_types.c:
+ qtmux: add CineForm support
+ https://bugzilla.gnome.org/show_bug.cgi?id=780024
+
+2017-03-14 15:09:44 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Only create new chunks if we have more than a single stream
+ There's no point in creating multiple chunks otherwise, it only wastes
+ some bytes for storing the chunk offsets.
+
+2017-03-14 10:09:46 +0100 Emeric Grange <egrange@gopro.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: add S16L support
+ https://bugzilla.gnome.org/show_bug.cgi?id=780022
+
+2017-03-14 15:48:08 +1100 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/elements/splitmux.c:
+ splitmux test: Use passed first/last timestamps
+ Don't hard-code the expected timestamp range, use the
+ values the caller is passing in.
+
+2017-03-12 11:42:25 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * Makefile.am:
+ * docs/plugins/inspect/plugin-soup.xml:
+ Add old plugin names to cruft list
+ This will help fixing uninstalled setup. Also fix missing path
+ correction in one of the plugin xml.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2016-12-15 12:38:40 +0100 Michael Dutka <mail@michael-dutka.de>
+
+ * gst/rtp/gstrtph264depay.c:
+ * gst/rtp/gstrtph265depay.c:
+ rtph264depay, rtph265depay: remove stray g_debug()
+ https://bugzilla.gnome.org/show_bug.cgi?id=779858
+
+2017-03-10 11:24:14 +0100 Wim Taymans <wtaymans@redhat.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: init fourcc
+ Initialize the fourcc to 0 so that we can detect failure later.
+
+2017-03-08 22:50:52 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/level.c:
+ * tests/check/elements/rglimiter.c:
+ tests: Add missing LDADD for libm in tests using math.h
+ Also, remove the math.h include for the one that just prentend to need
+ it.
+
+2017-03-08 22:15:46 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * Makefile.am:
+ * docs/plugins/gst-plugins-good-plugins-docs.sgml:
+ Fix shout2 plugin doc generation
+ In the previous patch, we also renamed shout2send to shout2, so it does
+ not clash with it's feature. Though we forgot to rename it in the doc
+ reference. This patch also add a cruft detection on the xml that made me
+ miss this error.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2017-03-04 10:52:47 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-shout2.xml:
+ * ext/pulse/Makefile.am:
+ * ext/pulse/meson.build:
+ * ext/shout2/gstshout2.c:
+ * ext/soup/Makefile.am:
+ * ext/soup/meson.build:
+ * sys/oss4/Makefile.am:
+ Fix plugin filenames to match plugin names
+ - libgstpulse.so becomes libgstpulseaudio.so
+ - libgstsouphttpsrc.so becomes libgstsoup.so
+ - libgstoss4audio.so becomes libgstoss4.so
+ https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2017-03-08 16:01:02 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ qtmux: Free EDTS instead of just clearing it and setting it to NULL
+
+2017-03-08 15:27:32 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Fix some memory leaks related to timecode tracks
+
+2017-03-04 00:34:44 +1100 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/elements/splitmux.c:
+ splitmux: Add unit test for reverse playback
+ Ensure that reverse playback works and generates the range
+ of timestamps (0-3s) we expect, in monotonically descending order.
+
+2017-02-28 11:50:45 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/multifile/gstsplitmuxsrc.c:
+ splitmuxsrc: Fix reverse playback
+ Fix the check for whether the start time of the segment has
+ been reached when playing in reverse. Otherwise, playback
+ stops after reaching the start of any file part, instead of
+ continuing until all parts within the segment have played
+
+2017-02-22 03:01:31 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Don't lose crypto info on a new moof
+ We parse the next moof in advance of having pushed
+ all samples from the previous one in some cases, and
+ we'll still need the crypto info from the previous
+ fragment so keep around any unused crypto info entries
+ when adding new ones
+
+2017-02-27 13:55:58 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ * gst/isomp4/atoms.h:
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Update modification times when sending the moov
+ https://bugzilla.gnome.org/show_bug.cgi?id=779422
+
+2017-03-01 16:11:47 -0800 Michael Smith <mlrsmith@gmail.com>
+
+ * gst/audioparsers/gstsbcparse.h:
+ sbcparse: Fix up values for allocation enumeration.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779389
+
+2017-02-28 13:10:50 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxreceive.c:
+ rtprtxreceive: fix potential leak of old, unassociated, association requests
+ https://bugzilla.gnome.org/show_bug.cgi?id=722560
+
+2017-02-28 15:47:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/avi/gstavidemux.c:
+ avidemux: Don't increment -1 / unset indices
+ CID 1398545
+
+2017-02-28 15:20:31 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Protect against NULL pointer dereference for streams without caps
+ CID 1363332
+
+2017-02-28 12:57:02 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtph263pay.c:
+ rtph263pay: Free mac on errors
+ CID 1212149
+
+2017-02-28 12:45:24 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtpvorbispay.c:
+ rtpvorbispay: Add missing break to for loop
+
+2017-02-28 11:02:54 +0100 Edward Hervey <edward@centricular.com>
+
+ * tests/check/Makefile.am:
+ check: Fix splitmux test CFLAGS
+ Needs to know where the gstapp headers are
+
+2017-02-27 21:02:51 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Fix compilation with gcc 7
+ qtdemux.c: In function ‘qtdemux_parse_samples’:
+ qtdemux.c:8450:39: error: ‘*’ in boolean context, suggest ‘&&’ instead [-Werror=int-in-bool-context]
+ if (stream->samples_per_frame * stream->bytes_per_frame) {
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
+
+2017-02-27 21:01:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/audioparsers/gstmpegaudioparse.c:
+ mpegaudioparse: Fix compilation with gcc 7
+ gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_reset’:
+ gstmpegaudioparse.c:209:3: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
+ memset (mp3parse->xing_seek_table_inverse, 0, 256);
+ ^~~~~~
+ gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_handle_first_frame’:
+ gstmpegaudioparse.c:951:7: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
+ memset (mp3parse->xing_seek_table_inverse, 0, 256);
+ ^~~~~~
+
+2017-02-27 19:31:39 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtpvorbispay.c:
+ rtpvorbispay: When getting new headers, replace the old version of them
+ This prevents storing an infinite amount of e.g. comment headers if they
+ come without a new initialization header in front of them. There can
+ only be one header of each type.
+
+2017-02-27 19:25:35 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/rtp-payloading.c:
+ rtp-payloading: Add new test for Vorbis renegotiation
+ Check if encoding, payloading, depayloading and decoding works if the
+ stream configuration (and thus the headers) change.
+
+2017-02-27 19:24:07 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtpvorbispay.c:
+ vorbispay: Only replace headers when receiving a new config header
+ If we also replace all headers when receiving any possibly following
+ comments header, we would throw away the config header before being able
+ to make use of it.
+
+2017-02-23 12:11:15 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/splitmux.c:
+ tests: splitmux: add unit test for content with sparse streams
+ https://bugzilla.gnome.org/show_bug.cgi?id=761086
+
+2017-02-22 11:23:19 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/multifile/gstsplitmuxpartreader.c:
+ splitmuxpartreader: ignore sparse streams when calculating the end offset of a part
+ A sparse stream's ending timestamp can be considerably smaller
+ than the ending timestamps of the other streams, which can lead
+ to skipping considerable time from the next part.
+ https://bugzilla.gnome.org/show_bug.cgi?id=761086
+
+2017-02-22 11:21:06 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/multifile/gstsplitmuxpartreader.c:
+ splitmuxpartreader: identify sparse streams
+
+2017-02-25 21:47:03 -0300 Edgard Lima <edgard.lima@gmail.com>
+
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * gst/audioparsers/gstamrparse.c:
+ * gst/rtp/gstrtpg726depay.c:
+ * gst/rtp/gstrtpg726depay.h:
+ * gst/rtp/gstrtpg726pay.c:
+ * gst/rtp/gstrtpg726pay.h:
+ * gst/rtp/gstrtppcmadepay.c:
+ * gst/rtp/gstrtppcmadepay.h:
+ * gst/rtp/gstrtppcmapay.c:
+ * gst/rtp/gstrtppcmapay.h:
+ * gst/rtp/gstrtppcmudepay.c:
+ * gst/rtp/gstrtppcmudepay.h:
+ * gst/rtp/gstrtppcmupay.c:
+ * gst/rtp/gstrtppcmupay.h:
+ * gst/rtp/gstrtpspeexdepay.c:
+ * gst/rtp/gstrtpspeexdepay.h:
+ * gst/rtp/gstrtpspeexpay.c:
+ * gst/rtp/gstrtpspeexpay.h:
+ * sys/v4l2/gstv4l2.c:
+ * sys/v4l2/gstv4l2bufferpool.c:
+ * sys/v4l2/gstv4l2bufferpool.h:
+ * sys/v4l2/gstv4l2colorbalance.c:
+ * sys/v4l2/gstv4l2colorbalance.h:
+ * sys/v4l2/gstv4l2object.c:
+ * sys/v4l2/gstv4l2object.h:
+ * sys/v4l2/gstv4l2src.c:
+ * sys/v4l2/gstv4l2src.h:
+ * sys/v4l2/gstv4l2tuner.c:
+ * sys/v4l2/gstv4l2tuner.h:
+ * sys/v4l2/gstv4l2vidorient.c:
+ * sys/v4l2/gstv4l2vidorient.h:
+ * sys/v4l2/v4l2_calls.c:
+ * sys/v4l2/v4l2_calls.h:
+ Update Edgard Lima's email
+ https://bugzilla.gnome.org/show_bug.cgi?id=779230
+
+2017-02-08 13:36:00 +0000 Andrew <nifigase@gmail.com>
+
+ * gst/rtpmanager/gstrtpjitterbuffer.c:
+ * gst/rtpmanager/rtpjitterbuffer.c:
+ * gst/rtpmanager/rtpjitterbuffer.h:
+ rtpjitterbuffer: Don't always reset PTS to 0 after a gap
+ In function rtp_jitter_buffer_calculate_pts: If gap in incoming RTP
+ timestamps is more than (3 * jbuf->clock_rate) we call
+ rtp_jitter_buffer_reset_skew which resets pts to 0. So components down
+ the pipeline (playes, mixers) just skip frames/samples until pts becomes
+ equal to pts before gap.
+ In version 1.10.2 and before this checking was bypassed for packets with
+ "estimated dts", and gaps were handled correctly.
+ https://bugzilla.gnome.org/show_bug.cgi?id=778341
+
+2017-02-24 15:59:41 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * meson.build:
+ meson: Update version
+
+2017-02-24 15:37:36 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ Back to development
+
=== release 1.11.2 ===
-2017-02-24 Sebastian Dröge <slomo@coaxion.net>
+2017-02-24 15:07:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.11.2
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2send.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ Release 1.11.2
+
+2017-02-24 12:50:21 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
2017-02-24 12:44:58 +0200 Sebastian Dröge <sebastian@centricular.com>
projects / platform / upstream / gst-plugins-good.git / blobdiff