+ver 0.48:
+ Fix signal strength calculation when quality is not provided.
+ Fix issues with wpa_supplicant state tracking.
+ Fix faulty removal of IP address from interface.
+ Fix permissions of newly created /etc/resolv.conf file.
+ Fix DNS proxy handling when in offline mode.
+ Add support for EDNS0 resolver option.
+ Add workaround for large EDNS0 queries.
+ Add workaround for DHCP startup failures with WiFi networks.
+ Add support for handling hostnames and domainnames.
+ Add support for IPv4 configuration via service interface.
+ Add support for fixed and manual IPv4 configuration.
+ Add support for default service changed notifier.
+ Add support for clearing failure state via service removal.
+ Add support for OpenConnect VPN connections.
+ Add support for IEEE 802.1x WiFi networks.
+ Add support for roaming between WPA and WPA2 networks.
+ Add various generic D-Bus helpers and use them.
+ Remove special handling of Ethernet devices.
+
+ver 0.47:
+ Fix segmentation fault on resolver shutdown.
+ Fix issue with adding nameserver that doesn't exist.
+ Fix issue when no broadcast address is given.
+ Fix issue with missing property changed signal.
+ Add checks for invalid supplicant state transitions.
+ Add initial version of oFono GPRS support.
+ Add support for dynamic debug framework.
+
+ver 0.46:
+ Fix reconnect issue when power off or disabling the device.
+ Remove problematic retry on failure code path.
+
+ver 0.45:
+ Fix crash with connect timeout and second connect attempt.
+ Fix reconnect issues after suspend or roaming attempt.
+
+ver 0.44:
+ Fix command line options for device filtering.
+ Fix issue with network reference in MBM support.
+ Fix handling when losing network access in MBM plugin.
+ Fix broken libiWmxSDK callback parameter handling.
+ Add work around Intel WiMAX SDK API breakage.
+
+ver 0.43:
+ Fix issue with missing scanning after power up.
+ Fix issue with udev versus /dev/rfkill event processing.
+ Fix issue with powered down device on connection attempt.
+ Add support for multiple connection attempts.
+ Add support for tracking the operation state.
+ Add full support for Ericsson MBM cellular devices.
+
+ver 0.42:
+ Fix issue with switching between hidden WiFi networks.
+ Fix issue with missing scanning after disconnect.
+ Fix issue with not triggering auto-connect in some cases.
+
+ver 0.41:
+ Fix race condition with WiFi devices and RFKILL.
+ Fix issue with WiFi connect/disconnect and some drivers.
+ Fix issue with WEP encryption and staging drivers.
+ Fix issue with wrong setup of loopback interfaces.
+
+ver 0.40:
+ Fix issue with wrong setting of initial AutoConnect value.
+ Fix issue with IP configuration and loopback devices.
+ Fix issue with build system and include directory.
+ Fix wrong variable for dhclient-script location.
+ Fix disconnect race condition with Bluetooth service.
+ Add support for ignoring bonding Ethernet interfaces.
+
+ver 0.39:
+ Fix file permissions for profile storage.
+ Fix service resorting when they are in different states.
+ Fix support for handling Bluetooth PAN devices.
+ Add support for AutoConnect property of services.
+ Add support for creating, modifying and removing profiles.
+ Add support for fully flexible task handling framework.
+ Add support for more generic RTNL handling and notifications.
+ Add support for full non-recursive build.
+
+ver 0.38:
+ Fix broken check for security modes.
+ Fix requirement of inotify when loopback support is disabled.
+
+ver 0.37:
+ Fix missing update of signal strength from scan results.
+ Fix error handling in case when passphrase is required.
+ Add support for PassphraseRequired property.
+ Add missing check for WiFi security modes.
+
+ver 0.36:
+ Fix missing reset of network reference when disconnecting.
+ Fix wrong variable reference when sending technology replies.
+ Fix wrong identifiers of D-Bus error names.
+
+ver 0.35:
+ Fix missing auto-connect trigger on Ethernet device removal.
+ Fix availability listing for devices without attached drivers.
+ Fix signals for connected and default technologies.
+ Fix notification to use service types instead of device types.
+ Fix potential pending scan result reply messages after removal.
+ Add support for blocking enable and disable technology changes.
+
+ver 0.34:
+ Fix setup of udev context before loading any plugins.
+ Fix rearming the scan trigger if a device got disabled.
+ Fix device power state changes tracking with RFKILL notifications.
+ Fix wrong usage of device types instead of service types.
+ Fix connect method to handle non-WiFi services.
+
+ver 0.33:
+ Add support for RFKILL changes of the WiFi subsystem.
+ Fix state value of Network Manager compatibility support.
+
+ver 0.32:
+ Fix broken device unregistration on removal.
+ Fix WiMAX device detection handling.
+
+ver 0.31:
+ Fix missing enforcement of offline mode for new devices.
+ Add support for persistent storage of offline mode.
+ Add support for persistent storage of device power state.
+ Remove deprecated and unused network storage callbacks.
+
+ver 0.30:
+ Fix issue where hidden network could show up in service list.
+ Fix issue with asynchronous notification of scan requests.
+ Fix message reference leak when adding interface fails.
+ Fix problem when removing network during inactive state.
+ Remove broken and unused callback for joining networks.
+ Remove deprecated device and network interface methods.
+ Remove test scripts for deprecated interface methods.
+
+ver 0.29:
+ Fix missing signal emission for offline mode changes.
+ Fix signal emission for changes in technology properties.
+ Rename Technologies property to AvailableTechnologies.
+
+ver 0.28:
+ Fix another reference counting imbalance when adding networks.
+ Revert supplicant change to always reset scanning after results.
+
+ver 0.27:
+ Fix missing disarming of the connection timeout.
+ Fix handling of multiple supplicant disconnect attempts.
+ Fix simultaneous connects from different technologies limitation.
+
+ver 0.26:
+ Fix broken handling of auto-connect logic.
+ Fix handling of out-of-range access points.
+ Fix support for connecting to hidden networks.
+ Fix reference counting for networks with same SSID.
+ Fix issue with WiFi interfaces not getting switched off.
+ Fix problems with delayed service list updates.
+ Fix disconnect/abort of connection attempts.
+
+ver 0.25:
+ Fix showing of WiFi networks with less than 25% signal strength.
+ Fix potential segmentation fault with network passphrases.
+
+ver 0.24:
+ Fix handling of initial device powered state.
+ Fix missing Powered property changed signals.
+ Fix canceling of a network connection attempt.
+ Fix stalled configuration issue with supplicant.
+ Fix detection of association errors from supplicant.
+ Fix issue with wrong scanning state information.
+ Fix hidden SSID detection routines.
+ Fix visible Ethernet services even without carrier.
+ Add global method call to request scanning.
+ Add support for global technologies list.
+ Add support for delaying service list updates.
+ Update the overall D-Bus API documentation.
+
+ver 0.23:
+ Fix dhclient probe/remove race condition.
+ Fix handling of disconnected services during auto-connect.
+ Add support for proper group name of hidden networks.
+ Add support for storing SSID details of hidden networks.
+
+ver 0.22:
+ Fix wrong auto-connect procedure after user connection.
+ Fix invalid update of already connected network.
+ Fix idle state handling after disconnecting device.
+ Fix disconnect race condition in WiFi supplicant.
+ Fix WiFi signal strength reporting.
+
+ver 0.21:
+ Add udev based network device detection.
+ Add support for global auto-connect feature.
+ Add support for basic service drag and drop.
+ Fix missing passphrase cleanup on service removal.
+ Fix potential duplicate network creation.
+ Fix handling of WEP shared keys.
+
+ver 0.20:
+ Add plugin for Intel WiMAX SDK support.
+ Add special handling for default vendor SSIDs.
+ Add support for default gateway in different network.
+ Add support for automatic switching of default gateway.
+ Add support for asynchronous handling of Powered property.
+ Add support for connecting/disconnecting Ethernet services.
+ Add support for more detailed error states of services.
+ Add support for clearing error state via ClearProperty.
+ Fix error code for invalid or unknown properties.
+ Fix various timeout handling issues.
+ Remove Policy and Priority device and network properties.
+
+ver 0.19:
+ Add hidden networks to the service list.
+ Add support for storing the service name.
+ Fix service list sorting for connected services.
+ Fix missing cancel command when operation times out.
+ Fix various issues with service favorite handling.
+ Remove Available and Remember network properties.
+
+ver 0.18:
+ Add support for asynchronous service connect method.
+ Fix broken storage of service favorite details.
+
+ver 0.17:
+ Add AT chat library implementation.
+ Fix service lookup for WiFi and WiMAX devices.
+ Fix service state signal emission and error handling.
+ Fix storing and loading of configured passphrases for services.
+
+ver 0.16:
+ Update Intel OSPM support to latest specification.
+ Add initial support for new service interface.
+ Add support for builtin plugins.
+ Add extra warning if no nameserver is defined.
+ Add error reporting for state and storage directory creation.
+ Add error message for network and device storing failures
+ Fix stale entry in gateway list after connection changes.
+ Fix handling of DHCP results with no nameserver.
+ Fix infinite loop for service lookup.
+ Fix various format string warnings.
+
+ver 0.15:
+ Detect VMware network interface and ignore them.
+ Fix setting of scan_ssid for hidden networks.
+ Fix empty network name property.
+
+ver 0.14:
+ Add support for detecting DHCP failures.
+ Add support for joining hidden WiFi networks.
+ Add support for device and network address property.
+ Add support for default /etc/resolv.conf generation.
+ Fix issue with wrong address setting for loopback.
+ Fix detection of WiFi access point changes.
+ Fix crash with blob properties.
+
+ver 0.13:
+ Add support for notification infrastructure.
+ Add fully dynamic property storage capabilities.
+ Fix broken loading of last network on bootup.
+ Fix crash when unplugging WiFi devices.
+ Rename OSPM plugin to Intel OSPM plugin.
+ Rename WiMAX plugin to Intel WiMAX SDK plugin.
+
+ver 0.12:
+ Fix connection state change handling.
+ Fix network list enumeration.
+ Fix broken driver matching for devices.
+ Fix issue with network identifier lookup.
+
+ver 0.11:
+ Add plugin priority handling.
+ Add network type for WiMAX.
+ Fix network protocol selection for Bluetooth PAN.
+ Fix parameters for Bluetooth PAN disconnect method.
+
+ver 0.10:
+ Fix races with connection signals.
+ Fix automatic switching of default connection.
+
+ver 0.9:
+ Rename FlightMode to OfflineMode.
+ Add static IPv4 setting support for Ethernet devices.
+ Add extra options to exclude devices and plugins.
+ Add support for toggling debug output.
+ Add support for ScanInterval property.
+ Fix handling of disconnect commands from applications.
+ Fix detection of networks that are out of range.
+ Fix setting network remember status.
+ Fix argument type checking of properties.
+
+ver 0.8:
+ Add Device and Network property to connection interface.
+ Add option to disable installation of data files.
+ Add command line option to show version number.
+ Fix signal emission for network changes.
+
+ver 0.7:
+ Add basic support for flight mode.
+ Add support for multiple storage drivers.
+ Add support for RTNL newlink watch API.
+ Add support for different security privileges.
+ Add support for device and network priorities.
+ Add functions for setting network properties.
+ Fix issue with listing devices without a driver.
+ Fix issue with WiFi scanning indication.
+ Fix detection of WiFi security changes.
+ Update WiFi driver to use new network helpers.
+ Install different D-Bus configuration for PolicyKit.
+
ver 0.6:
Add CONNMAN_API_SUBJECT_TO_CHANGE definition.
Add detailed configuration options.
projects / framework / connectivity / connman.git / blobdiff